Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

113 junta tórica de silicona, durómetro 70A, rojo, 9/16 pulgadas, diámetro exterior de 3/4 pulgadas, ancho de 3/32 pulgadas (paquete de 25)

Envío gratis en pedidos superiores a Mex $600.00

Mex $394.54

Mex $ 185 .00 Mex $185.00

En stock

Acerca de este artículo

  • Hecho de silicona para uso con una variedad de productos químicos y líquidos
  • Se puede utilizar en un amplio rango de temperatura de -65 grados F (-54 grados C) a 450 grados F (232 grados C)
  • Redonda en sección transversal para proporcionar un sello entre superficies cilíndricas superpuestas
  • Durómetro (dureza) de 70A para resistencia a la penetración
  • Cumple con los estándares definidos por la norma aeroespacial AS568A


This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.


GigaWatt
Comentado en los Estados Unidos el 6 de octubre de 2024
I bought these O-Rings to replace the leaking seals inside the front hydraulic couplers on my John Deere 318. They fit perfectly and stopped the constant slight leaks with attachments plugged into them.
roj
Comentado en los Estados Unidos el 13 de octubre de 2017
Just bought these to use in the pressure valve in my Umarex Fusion CO2 .177 pellet gun. No leaks!The 25 count will last a while. I previously bought five of the black o-rings for the Fusion off of ebay for nearly the same $, and they did not work.
A reader from Redwood City, California
Comentado en los Estados Unidos el 8 de mayo de 2016
Just what I needed for a special application that would be at a constant 400 - 440 degrees F. they are performing perfectly after two weeks at temperatures approaching their upper limit.
Bobo
Comentado en los Estados Unidos el 27 de mayo de 2016
Just what I needed for my UMAREX FUSION pellet rifle .
Tom
Comentado en los Estados Unidos el 9 de noviembre de 2016
Works on Moen cartridges.
Productos recomendados

Mex $406.23

Mex $ 199 .00 Mex $199.00

4.8
Elegir