No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Acerca de UsSYKRSS se especializa en productos de autopartes, se compromete a proporcionar a los clientes piezas de automóviles de alta calidad. Estamos comprometidos a brindarte un buen servicio y sincero agradecimiento a las personas que nos eligen. El paquete incluye: 2 extremos de manguera giratorios de PTFE de 0 grados, 2 extremos de manguera giratorios de PTFE de 45 grados, 2 extremos de manguera giratorios de PTFE de 90 grados, 1 herramienta de reparación, 1 manguera de PTFE (10 pies) 1 cinta
Manguera de tubería de combustible PTFE 6AN
Comprueba la presión de trabajo y la temperatura de tu sistema antes de comprar.
Temperatura de trabajo: -60 °C a 230 °C. Presión de explosión (PSI): 10000 PSI. Presión máxima de trabajo (PSI): 3000 PSI
- Peso: 0,75 kg
- Tamaño: 19 x 19 x 8,5 cm
Longitud de la línea de combustible: 10 pies
Esta manguera está hecha para resistir el calor extremo, la abrasión y la corrosión.
Material: PTFEFit E85ID: 21/64 pulgadas. Diámetro exterior: La manguera de PTFE de 0.465 pulgadas es tan dura, no se puede plegar
- Se recomienda la instalación profesional.
- Ofrece flexibilidad y flexión superiores.
- Radio de flexión mínimo: 88,9 mm
Amplia aplicación:
Medio aplicable: todos los combustibles, lubricantes y refrigerantes automotrices.
DETALLES
Extremos de manguera giratorios de 0 grados
Extremos de manguera giratorios de 45 grados
Extremos de manguera giratorios de 90 grados
Ryan Koch
Comentado en los Estados Unidos el 15 de febrero de 2025
I used this kit to replace a commonly rusted out section of fuel line on my 2003 Honda CR-V. I was pleasantly surprised at the quality of this kit, probably because I didn't expect a lot. This isn't a top shelf product, but it also isn't bottom of the barrel. I would say it above average and it certainly gets the job done, and at a fraction of the cost of the big name brands. Would I put this on a high-end show car? Not likely, but it's more than sufficient for a daily driver, weekend cruiser, or Honda CR-V repair.The fuel line is good quality, good enough that a pair of metal shears wouldn't cut through it. To get a clean cut end I had to use my grinder with a cut-off wheel. I tried a hacksaw, but that didn't work so well for me; but in a pinch it can get the job done.The aluminum hose ends are easy to use and are of decent quality. I'm pretty sure the hose ends are billet aluminum, because of how it cut when I modified one of them. I appreciated the hose expansion tool, as it spread the hose open easily for the plastic connector I needed to attach to (seen in the pictures). I put a hose clamp around that connection just to be sure it didn't leak, but I think it probably would be fine without. I haven't smelled gasoline anymore after I drive the CR-V, so it seems to have worked.I would recommend wearing leather gloves while working with the hose ends, unless you like being stabbed by stainless wires. That's up to you though. To each their own. 😁I forgot to take pictures before I sprayed everything with undercoating, so that's why it looks so awful.Overall, I would recommend this product to others. I don't think you'll be disappointed, so long as your not expecting high dollar show car looks. But for the weekend vehicle or "common man's" hot rod that may go to car shows on ocassion, it looks nice enough for that.
Rosa
Comentado en los Estados Unidos el 27 de diciembre de 2024
Good kit ptfe and fittings are good quality hold up well
Bruce Graham
Comentado en los Estados Unidos el 12 de noviembre de 2024
Used this for a coolant line to a turbo and it worked fine. Fittings are not great quality but did not leak and the price was right.
Productos recomendados
Mex $499.99
Mex $ 244 .00 Mex $244.00
Mex $497.93
Mex $ 268 .00 Mex $268.00
Mex $453.87
Mex $ 213 .00 Mex $213.00
Mex $2,262.01
Mex $ 1,040 .00 Mex $1,040.00