No hay artículos en el carro
No hay artículos en el carroMás información del producto
Bike USA Stabilizer Wheel Kit
Mount to the Frame not to the Axle.
Our Patented Heavy Duty Adult training wheels are the strongest and most durable bike training wheel kit on the market. They are made of tubular steel much like the frame of the bike. They do not attach to the axle which is a weak mounting point. They mount to the rear chain and seat stays on either side of the bicycle frame using special plastic coated u-bolts. This kit is great for any adult who lacks proper balance on a bicycle.
Each side is under 13 inches in Length.
When mounted properly each stabilizer wheel should be about 1/2 - 1 inch off of the ground and teeter much like a traditional bicycle training wheel kit would. Installation is easy and the bicycle stabilizer wheel kit can be removed at any time. Simple hand tools required for installation of these bike training wheels. Photo step-by-step installation instructions are included with each bicycle stabilizer training wheel kit.
Will fit through a standard doorway!
The total width of the stabilizer wheels is under 30 inches once mounted properly, which means they will fit through a standard doorway. Some people keep these training wheels on permanently and store the bicycle indoors. This width is also important for those that bicycle carriers and automobile bike racks. You will also still fit on a standard sidewalk, through hallways, and you no longer need to use your bike kickstand!
Actual bike tires with tubes are included!
Each Training wheel set comes with two 16 inch tubes with inflatable tires and axles just like on a traditional bike. This is one of the reasons why our kit is able to support so much weight. This kit is a great alternative to buying an adult tricycle. Our kit will mount to any traditional "diamond" shaped bicycle which includes cruisers, mountain bikes, and commuter bikes as long as the original bike has a 24 - 27 inch tyre. Please note this kit will not work with a folding bike, and electric bicycle, or a recumbent bicycle.
Donna-Lee Rice
Comentado en Australia el 25 de marzo de 2024
After years of not riding due to MS and related issues I tried these stabiliser wheels to give me stability and confidence. They were easy to attach and after a practice around my neighbourhood I'm riding again.
Customer
Comentado en los Estados Unidos el 18 de septiembre de 2023
Several months ago we purchased a Townie 7d Electra for my wife. I bicycle frequently, she hadn't ridden for years; we hoped this could become a retirement activity for us. She has a partially amputated foot and wears a prosthetic brace. She just never could get comfortable on the bike; she fell almost once per outing, often due to tipping over when stopping. She suffered several minor injuries and her confidence fell to the point that it looked like the bike "experiment" was over. These wheels have saved the day. She now cycles with confidence, and can even stop to chat without dismounting. I think the set-up is every bit as good as if she were on a tricycle - and is probably lighter weight and more flexible regarding surfaces that can be ridden. There are some things to get used to, like turning (slow down for those turns!) and leaving room for the side wheel so that it doesn't run off the edge of the path or hit a curb, but these wheels are certainly serving their purpose, and are built well enough that they should last indefinitely.Now about installation - it will need to be done correctly; many customers be able to handle it, but if you are not, be prepared to spend an hours' labor (probably another $100 or so) at a good bike shop to get it done right. I'm a very experienced bike mechanic with a garage-shop full of tools. Installation took about 2 hours, to include grinding out divot in a portion of the plate that rests against the frame to allow for proper operation of the disk brake. I also used a dremel to round the inner side of several of the plastic spacers, this achieved proper spacer thickness for precise alignment of the wheels, with the added benefit of making a larger contact surface with the frame tubes. I note that with the plates installed as high as they would go I was only just able to achieve the 1/2 inch ground clearance on each side. Of course this will be different on every bike, but I see a posibility where some frames/some bicycle wheel sizes might not allow an installation high enough to keep the auxiliary wheels off the ground. The recommended 1/2 clearance seems to make for good riding characteristics; I see where some reviewers recommended more clearance, but I know the amount of tip the 1/2 in clearance allows is about as much as could be permitted without my wife becoming uncomfortable.Bottom line, a good product which, when properly installed, does just what it is supposed to do, and has kept my wife and me on the road together (or I should say bike trails, she's not up for traffic).
Mauricio
Comentado en México el 1 de septiembre de 2023
Es un producto que le está ayudando a mi hijo a recuperar su confianza y andar en bici después de un accidente.
TAN WEI SIEN
Comentado en Singapur el 3 de julio de 2022
Nil
Malu López
Comentado en México el 7 de junio de 2022
Tengo 54 años y nunca aprendí a andar en bicicleta. Siempre quise, pero me daba miedo. El equipo quedó excelente en mi bicicleta. Me siento muy segura y sin miedo a caerme! 👍🏻😊
Arturin1979
Comentado en México el 9 de noviembre de 2022
A los 15 días de uso se rompió una de las masas
alejandra g.
Comentado en México el 26 de julio de 2020
Yo dudaba en comprar por el precio, pienso que es caro, pero me arriesgué y las compré, la verdad no me arrepiento, es un buen producto. Las quise para mi mamá que tiene 74 años y quería andar en bicicleta otra vez, así que se las coloqué a una bici usada de 24 pulgadas y funcionaron bien, ahora mi mamá anda en bici y verla feliz no tiene precio, lo recomiendo de verdad.
Joachim Gehringer
Comentado en Alemania el 25 de julio de 2019
Ich konnte die Teile am Fahrrad einfach montieren. Erfüllt den Zweck gut.
ronald smith
Comentado en el Reino Unido el 16 de agosto de 2013
Your Stabilizer Is now fine; however following the instructions to the 'letter' left the rear wheel about 4" off the floor. With adjustments to the fixing positions I got the gap under the two stabilizer wheels to about 1/2" off the floor. Must be the unusual shape of my bike frame, but all is now ok. thank you.Ron.
Productos recomendados
Mex $760.42
Mex $ 410 .00 Mex $410.00
Mex $668.00
Mex $ 334 .00 Mex $334.00
Mex $416.00
Mex $ 208 .00 Mex $208.00
Mex $490.00
Mex $ 254 .00 Mex $254.00
Mex $467.00
Mex $ 238 .00 Mex $238.00