No hay artículos en el carro
No hay artículos en el carroGeorge Xu
Comentado en los Estados Unidos el 7 de marzo de 2025
We installed these under our cabinets to brighten up the countertop and also to use as a nightlight. These LED strip lights create a very even and diffused pattern making them very soft on the eyes. We have been using them for 9 months now and have not had any issues.
ozzie O
Comentado en los Estados Unidos el 10 de marzo de 2025
Makes my display cabinet look awesome. Love using the remote to turn on lights
Customer
Comentado en los Estados Unidos el 11 de febrero de 2025
They're great when they work but you have no idea if the connection will actually work until you compress them. If the connection fails, then the copper tab on the light strip is ruined and so is that connector. Then you have to shorten your light section and try another copper connection point. Very frustrating!! However, if the connection IS successful, its a huge time saver over soldering and a more reliable connection than soldering. I wish there was a way to verify the connection was good before you compress them but I don't see how that can be possible.
Bradley L. Shortell
Comentado en Canadá el 28 de julio de 2024
I have soldered before but it does require some steady hand eye coordination. (Things I struggle with lately). These clips are VERY user friendly and work very well for the continuity of light if you are extending your run. My project requires some bends less than 90° and using the wires supplied these worked great. The company that supplies these is also great to work with, quick response to questions and concerns. 👍👍 for BTF.
Ricardo Loar
Comentado en México el 22 de febrero de 2024
El producto es bueno y de calidad pero dicen es de 12 mm cuando es de 10, es la unica queja
NOE R.
Comentado en México el 1 de diciembre de 2024
Funcionan bien 👍
Yvan
Comentado en Canadá el 5 de abril de 2024
I have to say that I had a lot of problems with the connectors but not for the obvious reasons.First, always make sure to cut your strips as straight as possible, otherwise you risk not having a good electrical connection with one or more contact(s).Second, I found it easier to use a very small vice to crimp the connectors, the hard part is keeping the strip straight in the connector, this is almost a two-person job with one person holding the strip straight into the connector and the other person using the vice. Don't over-tighten or you'll crack the connectors. Guess how I know!The real problem is, however, that something happened that was not indicated anywhere and I don't understand how it can even be a problem. If I use the connector on the "left" side of the strip, that is, I can read the "+5V" on the strip the right side up, then all works fine. But if I use the connector on the "right" side of the strip, with the "+5V" upside down, then the warm white works fine but as soon as power is applied to the cold white, it looks like it's at 100% no matter what. And before you ask, I cut the strip exactly on the line as per the instructions and my +5V and ground wires were correct for both tests.At first I thought I was making bad connections, using the connector in the wrong way. So I kept cutting my COB LED strip and wasted multiple connectors as you can see in my photos. So now I don't have enough connectors and not enough length of FCOB strip.Trying to resolve the issue and asking for replacements from the seller, I will update if anything happens.update: over a month later and still no response from BTF-Lighting about the problem nor a replacement of the FCOB LED strip.
Productos recomendados
Mex $628.89
Mex $ 320 .00 Mex $320.00
Mex $499.00
Mex $ 224 .00 Mex $224.00
Mex $317.43
Mex $ 171 .00 Mex $171.00