No hay artículos en el carro
No hay artículos en el carroLos kits de adaptador para convertir marcos Headshok para funcionar ya sea de 1.5 pulgadas, cónicas o horquillas de dirección de 1 1/8 pulgadas incluyen: rodamientos de cartucho, carrera de corona y cubierta superior del rodamiento
B. Felsher
Comentado en los Estados Unidos el 21 de agosto de 2023
Used to convert my Lefty fork (which kept breaking during races) to a rigid Whisky carbon fork. It worked great. Comes with the crown race and the upper headset bearing cup, so everything you need is included but your new fork.
Ian
Comentado en los Estados Unidos el 5 de febrero de 2023
I have a 2014 Cannondale F29 Alloy mountain bike, and I needed to buy a new fork, but the headset wasn't compatible with the new fork (the stock headset was likely built for a Lefty fork). This headset was exactly what I needed; it allowed my bike to use a fork with a 1 1/8" to 1.5" tapered steerer tube. My head tube is a System Integration head tube, measuring an inner diameter of 50.9 mm top and bottom.This kit included: crown race, bottom bearing, top bearing w/ adapter, slotted compression ring, 3 plastic shims, and the dust cover. When installing the headset, I had to press in the bottom bearing and the top adapter (the top bearing sits in the adapter, no press fit) directly into the head tube. I used anti-seize compound, and I ended up not needing the plastic shims at all once I put it all together.This product worked great for me! If you're in the same boat with a Cannondale System Integration head tube wanting to run a fork with a tapered steerer tube, give it a shot.
B. Rogers
Comentado en los Estados Unidos el 29 de noviembre de 2023
This wasn’t the headset that I needed but they quality is good! Smooth bearings and everything matched the description
john alcazar
Comentado en los Estados Unidos el 23 de septiembre de 2023
Me sirvió para una cannondale scalpe 2014
RAA
Comentado en los Estados Unidos el 12 de abril de 2022
This is a 52mm lower bearing, if you don't have SI cub, it will not work. On Cannondale bikes, the bearings don't go in head tube, they fit in SI cup. Thus, the reason they never mention bearing sizes like other bikes.
Productos recomendados