No hay artículos en el carro
No hay artículos en el carroCarlos
Comentado en Canadá el 12 de enero de 2025
Le module fonctionne tel que décrit par le manufacturier. Fácil à programmer. Utilisé pour un ventilateur de 115VAC 3A en opération discontinue. Bon qualité par rapport au prix.
Tyler
Comentado en Canadá el 23 de septiembre de 2024
False advertising this is NOT a 555 timer.
MattJH
Comentado en los Estados Unidos el 23 de febrero de 2023
Its actually a great little programmable timer for the price! Here are the directions for use I figured out:Mode 1 is an ON delay when applying 24 Volt (power) to the board and the adj. Pot is used to set the time delay.Mode 2 is the same as above except it is an OFF delay.Mode 3 is toggle Mode. If the board is continuously powered by 24 vdc., touch X1 to + vdc and the relay will pull in and hold. Touch X1 to + Vdc again and the relay will drop out.Mode 4 is an ON delay activated when X1 is momentarily touched to + Vdc supply voltage and then released. The delay is set by the adj. pot.To set the modes, hold the button down until the blue Mode LED stops blinking and turns on solid. Then used the button to toggle through the modes to the one you want and then hold down the button until the LED starts to blink again. Then release the button and you're good to go.Basically, Mode 1 and 2 work when power is applied to the board. Incidentally, if the X1 terminal is momentarily touched to the +Vdc, the time period will reset. Mode 3 and 4 work with power supplied continuously to the board and X1 is used to do the triggering by touching to + Vdc supply voltage momentarily.
Don B.
Comentado en los Estados Unidos el 18 de diciembre de 2023
So like many have stated on 12 volts the LED will light but the relay does not. Well it turns out that the one I received has a 24 volt relay. So in increasing the voltage to around 18 volts it works fine. In reviewing the listing they claim 5 to 24 volts and the 24 volts is in Parenthesis! So obviously these are NOT universal voltage. I had a 12v relay I swapped out on the board and now it works fine on 12v. Its simple little timer. I like it but deceiving sales.
Gerardo
Comentado en México el 1 de noviembre de 2022
Muy buen producto, no trae instructivo pero ahí viene en el anuncio las funciones que trae.
Leif-Eric
Comentado en los Estados Unidos el 23 de septiembre de 2022
No instructions with the unit, but easy to figure out, working great for a low price.
Productos recomendados