Muy facil de instalar a muy buen precio.

No sirve prende cuando quiere hace que tu aparato no trabaje al 100% en frío y cuando se apaga hasta 1 día dura para volver a prender yo tengo una unidad paquete de 5 toledas y parecía que tenia aire acondicionado de agua..... cambie el termostato al viejito que tenia y wuala frío y agusto fue un desperdicio haberlo comprado

Me gusto el producto, mi esposo lo instalo fácilmente y logré configurar con Google home muy fácil. Hasta ahora todo muy bien. Muy práctico. Estoy satisfecha con el producto. Gracias

Installation thermostat itself was straightforward. The only problem was no c-wire which means the battery will be used up while thermostat working. Therefore, I bought the c-wire power connector with thermostat together, and it seems easy to install connector as YouTube videos. But my boiler is not the same circuit board like YouTube. It doesn't even have c-terminals. Luckily, after researching all night. I figured out the way to find the c-wire from existing wiring and where to connect the connector. The nest is working perfectly with power connector now.The installation of connector might be a bit difficult for some boiler. If you are not 100% sure doing it right, perhaps better find a pro or your friend.

Se ven bien pero la caja venía abierta y los instructivos sin las cintas de nuevo

I bought this when it went on sale and also discovered that PG&E offers a $50 rebate. This made it a no brainer to replace the lousy Honeywell thermostat I've been wanting to replace for a while.It's works good, was easy to install, and does a better job than the Honeywell it replaced. No issues with WiFi connection or app servers being flaky or down. I like that it also has trends showing how long it runs during each day, a nice addition would be temperature and humidity trends too.Some things to be aware of:1. Google owns Nest, so this "Nest" thermostat will only work with the Google Home app and not the Nest app. I have another Nest device that only works on the Nest app. It is annoying as I would prefer they work in either one app or the other or have the option to move both into one app, but it's not world ending. I found the Home app to be just fine, but a couple of things like where to access and edit the schedules could be more intuitive.2. You can remove your existing thermostat, note the way it is wired, and check to make sure this is compatible with what you have on their website before you buy it.3. This will only support 2-stage heat OR 2-stage cooling, not both. If your system has both this isn't going to provide you with ideal results and I suggest buying something else.4. The installation manual is using the Home app to scan the QR code on the thermostat. It does a decent job stepping through the installation process and will even connect the thermostat to your WiFi for you. However I did run into an issue with the wiring diagram it provided with my 2-stage gas heating, I answered "yes" to "does your thermostat have two sets of labels" or something along those words, and it mismatched the labeling on the 2-stage heat wire. I went back to the question and said "no" and the wire label was then correct. This was more of an annoyance to me, but I could see this potentially causing unnecessary headaches for someone unfamiliar with thermostat wiring.5. Make sure you have the C-wire, or if you don't have it get the C-wire adapter kit they offer. From some of the reviews if you don't you're going to have a bad time. Mine has the C-wire as most newer HVAC units do so wasn't a concern for me.6. It was actually very easy to add other household members in to allow them access to the thermostat in the Home app and have it track if they are home or not for it to automatically go into Eco Mode if it detects everyone is gone. I haven't yet enabled this feature so I can't say how well it works yet.

No funciona con el app de Nest solo con el app de Google Home

Las fotos del producto no son realistas. El frente del termostato es un espejo y no gris claro mate como se ve en las fotografías. Por lo demás funciona perfectamente.

Es mejor que el nest tradicional porque en este se pueden programar temporizador desde la app y en el otro no.

Es muy confuso la conexión no hay manuales

I was looking for a basic, smart thermostat for our cabin so I could monitor the temperature over the winter in the event of heating issues or someone kicking the door in and it freezing inside; and also, because we turn the heat way down while not there, I could turn it back up on the way there and have it already warm when we arrive. As I read reviews on this thermostat, which I kept going back to when I reviewed others, it seemed like most complaints were about needing a "c" wire to the thermostat and Google not disclosing that. I can't speak to that as I'm not sure it's absolutely necessary, I knew nothing of wiring a thermostat to a furnace. I went into it though assuming I needed a "c" wire and researched different ways to do it. There were other complaints like displayed temperature inaccuracies, but at the end of the day I went with the basic Google Nest in sand color (looks pink to me). I'm glad I spent the time researching ahead of time and, so far, glad I didn't listen to the "don't buy this product" reviews. Does exactly what I want it to do, easy to use, displays perfectly accurate temperature, and was easy to install (again, glad I researched quite a bit and was prepared). Now for my install experience: Just for the record, my cabin furnace is heat only, so I only really needed 2 low voltage wires from the thermostat to the furnace. The existing cable had 3 wires however, one of which (the green one) was not hooked up at either end. FYI, take the advice of the "how to" videos and take a picture of the wire locations on the old thermostat before removing them, and make sure the furnace breaker is off too. The green wire, as I researched, is usually for operating the furnace fan separate from when it's on for heating or cooling, something I, and probably most people, don't use. The white and red wires were hooked to their corresponding letter coded (R&W) spaces on the thermostat and furnace. I had purchased a plug-in 24v transformer with a long set of wires, based on my previous research, to use as the "c" wire, which I learned supplies power to the thermostat. I intended on plugging it into a nearby outlet, running the wire alongside some doorframe trim, which would hide the wire, and into the wall behind the new thermostat. This, I think, would have worked just fine. I also learned though, from watching another "how-to" video just before I started the project, that all furnaces have a 24v connection space along with where all the other thermostat wires would go. So I just hooked the unused green wire to the "c", or 24v, spot on the furnace and to the "c" connector on the Nest thermostat. *The Nest comes with wire identifying stickers and I did label this wire on both ends to indicate it's now the power wire. Once the wiring was done, turned the breaker back on and followed the install directions from the Google Home app. The only minor issues I had was that the display was in Celsius, not Fahrenheit, and it took me awhile to figure out that this needed to be changed via the phone app, not the thermostat. There may be a way, but I couldn't figure that out. Also, was a little nervous because of the previous reviews I read when the initial temperature displayed about 4-5 degrees above the actual temperature, but by the time I cleaned everything up, it was right on. In Google's defense, it did indicate it takes a little bit to adjust itself. Very happy with it and glad I picked this one-so far anyhow.

This is best!

It's perfect