Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Jax PBP Pewter Patina, Negro, 16 oz

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,380.32

Mex $ 676 .00 Mex $676.00

En stock

Acerca de este artículo

  • 16oz bottle(1 pint)
  • Produces a dark black antique finish on pewter, lead, brass,bronze,copper,tin-lead alloys and solder
  • Made in the usa



Descripción del producto


De joyas a edificios

No importa cuán pequeño o grande sea tu producto metálico, JAX Chemicals tiene la solución para proporcionar a tu proyecto resultados hermosos y duraderos.

Soluciones de acabado y pulido de metales JAX

JAX Chemicals fabrica una amplia gama de productos, incluyendo productos de limpieza, eliminadores de óxido, pulimentos de metal, revestimientos para metales, productos de ennegrecimiento y dorado, y tratamientos para artículos de bronce y latón. La empresa también produce una gama de productos diseñados específicamente para envejecer metales, como cobre, latón y bronce. Estos productos crean acabados de aspecto antiguo en metal y vienen en diferentes tonos de verde, café y azul.

  • Resultados auténticos y consistentes
  • Seguro y fácil de usar
  • No requiere calor ni electricidad
  • Reaccionar en cuestión de segundos
  • No inflamable
  • A base de agua

JAX Pewter Black

JAX Blackeners

Soluciones de ennegrecimiento de metal a base de agua de acción rápida, fácil de usar, para metales antigüedades y ennegrecimiento.

Productos para plata de ley, oro, peltre, zinc, plomo, bronce, latón, cobre, níquel, hierro, acero, aluminio, plomo y soldaduras.

Negro Latón Bronce Cobre Oscurecimiento

Oscuradores JAX

Soluciones de acción rápida, fáciles de usar, a base de agua para metales antiguos u oscuros.

Productos para bronce, latón y cobre. Los acabados incluyen gris, café y café-negro.

Pátina verde

Colorantes JAX

Soluciones colorantes a base de agua para metal.

Productos para bronce, latón, cobre, hierro y acero. Los acabados incluyen verde, oro, óxido antiguo y negro dicroico FX

Soluciones de limpieza JAX

Soluciones de limpieza JAX

Soluciones de limpieza de metales a base de agua y de acción rápida. Limpiadores agresivos para oxidación pesada y limpiadores más delicados para bronces de museo. Limpiadores para latón, bronce, cobre, plata, oro, aluminio y mármol. Removedor de óxido para hierro y acero. Eliminador de laca para quitar laca vieja, amarillenta o agrietada.

Soluciones de chapado JAX

Soluciones de chapado JAX

Soluciones de chapado químico para plata (en cobre, latón y bronce) y cobre (en hierro y acero). No requiere calor ni electricidad.

Soluciones de acabado JAX

Soluciones de acabado JAX

Soluciones de acabado de metal fáciles de usar para evitar el óxido y el deslustre. Estos productos a base de agua son perfectos para uso en joyas o museos.

JAX

La solución para tus proyectos


Placeholder
Comentado en los Estados Unidos el 6 de mayo de 2022
Brushed off the old laquer, polished up the brass with steel wool, and dipped them in Jax. They came out perfect.
wyngate1
Comentado en los Estados Unidos el 9 de septiembre de 2020
Its a little overpriced, but it's worth it. Gives the best finish on your solder, and zinc as well.Just remember to wear rubber gloves as this stuff will burn your hands!
Heather Williams
Comentado en los Estados Unidos el 21 de julio de 2017
Excellent stuff..my man thought my Remington needed a good polish to restore the shiny bronze to it.... I tried MANY products to turn it brown-black again (from dish soap to sulfur), but this was one of the only things that did it, and very quickly at that.
jhearl
Comentado en los Estados Unidos el 27 de julio de 2015
The first time I tried this product, I was horrified by the results! I had thoroughly cleaned some test pieces of brass by sanding and wire brushing, soaked some in white vinegar and others in diluted muriatic acid. Dunked the parts in the Jax and they turned a dark brown quite quickly. When I rinsed them with water, the brown coating flaked off and left a splotchy mess on the brass. Some parts looked like copper, other parts were brown. Nothing was black. Horrible and unusable.I got a suggestion to try painting it on with a brush rather than dunking it. For some reason, that made all the difference! I was able to move the Jax around with the brush and got a nice, even coating and it actually turned out to be black! I have been using Casey's Brass Black for several years, but it has a few drawbacks. It's inconsistent on solder and the blue color can stain wood & paint. Jax has a very light blue color in the bottle, but seems to go on clear and doesn't stain. It will also blacken pot metal (cast metal fittings) that are often used on ship models. Casey's will not do that.Parts must be thoroughly clean! On the brass I tested, I left one side uncleaned and Jax didn't do anything to it. I leave my parts soaking in white vinegar after cleaning them (by filing, sanding, and wire brushing) for a minimum of 10 minutes. I've tried less time and sometimes get spots that won't completely blacken.The one drawback is the price. On the Jax website, it is considerably cheaper, but their shipping charges actually wind up making it more expensive than Amazon's price. But it's still quite expensive compared to Casey's. As long as the chemicals stay viable, this bottle will last me for a long, long time.
C. Carrascosa
Comentado en los Estados Unidos el 19 de septiembre de 2015
I have followed the instructions for more than one brand of products very similar to this... and the results have been iffy. I am not sure if its the chemical that's difficult to use correctly, or if its just one of those products that don't quite work as advertised?That said, this brand was a decent value for price. Unfortunately the hardware I was trying to age... appeared to age ok. After having it soak for much longer than recommended. Still running into issues where the hardware seems not to be holding the process. Maybe it's user error,...? However I think that more information could be made available with the product. Still have not achieved the desired effect, as I have to re-finish the hardware.It seems to be hit and miss with what metals will age more quickly. I have had 3 pieces of hardware, made of the same materials... and only 2 aged well. Now all three are losing the black patina. That said... giving this a 3 star review, because it works, but I haven't seen it work well yet.
Productos recomendados