Essbe
Comentado en los Estados Unidos el 31 de marzo de 2025
Works exactly as described. The adhesive sticks well and provides the exact amount of gap needed to work with the Luxe bidets.
Hippiechick
Comentado en los Estados Unidos el 15 de septiembre de 2024
I got a bidet for Christmas. After about a month or so you noticed that the seat is not sitting stable. The bumpers fixed the problem. They are the perfect height and thickness. The quality is very good. Plus it’s easy to install. They look very sturdy. I’m guessing they could hold a couple hundred pounds. As for the bidet, I recommend everyone get one. 🤙🏽✌🏽
maria del pilar martinez ruiz
Comentado en México el 8 de mayo de 2022
Es muy necesario para que el asiento del wc quede nivelado, ya que el bidet queda abajo del asiento
Leon
Comentado en México el 10 de junio de 2021
Se despegan, probe varias posiciones pero siempre uno de los 2 se despegaba.
Client d'
Comentado en Canadá el 24 de enero de 2021
Très bonne adhérence. Par contre, j’avais besoin d’un peu plus d'épaisseur, je les ai changés. J’ai donc, racheté un ensemble qui comprenait des pièces de 5 mm pour rehausser. Le nouvel ensemble comprenait 8 butoirs plus 8 pièces à rehausser, cet ensemble est moins dispendieux.
Meka Jones
Comentado en Canadá el 20 de febrero de 2020
Got these to drain our Cat Genie into the toilet. They work beautifully and keep the seat raised and sturdy.A caution about installation: the included positioning instructions were NOT appropriate for my toilet. Luckily for me these were repositionable (once, at least once) and I was able to modify their location to one that actually fell fully onto the rim of my toilet. Easy after I had a closer look at the toilet. Suggest you do so BEFORE positioning as the adhesive is probably stronger the first time around.
Dave B.
Comentado en Canadá el 5 de septiembre de 2020
works like a dream, easy to install. Because bidets vary in terms of how far forward or back they are installed, I made the mistake of placing the back ones exactly as shown in the installation instructions then found out it conflicted with the back of the bidet (mine's Tushy) and the seat wouldn't go down properly. I was lucky to be able to pull off the back bumpers and reposition them within a minute or so without damaging too much of the adhesive off the bumpers. Despite this, adhesion is excellent and product works beautifully.