No hay artículos en el carro
No hay artículos en el carroAna E. Cortez
Comentado en los Estados Unidos el 14 de julio de 2024
Well made easy to use. Effect fit.
Priti S
Comentado en los Estados Unidos el 13 de julio de 2024
I recently replaced the broken plastic insert on my old patio door screen with these diecast screen door corner inserts, and I couldn't be happier. The original plastic insert had worn out from frequent use, but these metal inserts are a perfect fit. Installation was straightforward and can be done on either the top or bottom of the screen door. The quality is excellent, and the adjustment screw ensures a snug fit. Not only are these inserts durable, but they are also affordable, saving me the cost of replacing the entire screen door. My screen door now functions like new. Highly recommended!
John H.
Comentado en los Estados Unidos el 12 de septiembre de 2024
We lived with our sticking, scraping, sliding screen door for way too long. I looked up the parts needed and the youtube how-to video. Looked pretty easy. I disassembled the lower rail of the door and extracted the broken plastic bracket, and tapped into place the replacement cast metal bracket, on both sides. Smooth sailing. Then came time to simply snap into place the wheel/spring assembly. two little tabs you spread and slip onto the 2 little nibs. NAH !!!! wquldnt go. I tried different screw driver blades to pry open the wheel bracket. tapped and twisted. No good. I double checked the video. "just simply spread the ends and snap it in" Hell Nooo. I ended up prying the wheel out of it's holder and then muscling into place the wheel holder with the spring, using a needle nose plyer, then I had to reinsert the wheel into it's spring-equipped bracket, then had to bend closed the two halves of the bracket over the 2 pins. Maybe i just misunderstood the "simple" video. Now I'm waiting for my pain meds to kick in to help my 74 year old back. So, I did it myself !! and the door slides and glides like new. And with it's new, metal bracket parts maybe it will hold up a while. I need a nap.
RickeyG
Comentado en Canadá el 23 de junio de 2022
best value for the buck... its excellent
Pten
Comentado en Canadá el 6 de mayo de 2020
Come with 2pcs in package. My old door hardware screw adjuster was busted so door would drag along track. You can see in pic if you twist screw too much it breaks the corner insert so you're screwed. I used this with Prime-Line Products B 610 Screen Door Spring Tension Roller with 1-Inch Steel Ball Bearing Wheel as my original tension roller looked completely different. So this corner and wheel/spring combo work together. After removing screen from door, I hammered apart the two short lengths of the frame to reveal the original corner inserts which I pried out with a screwdriver. Warning! These corner inserts (new and old) are made of brass so they shear easily. You need to buy double the required amount because I hammered new part too far in frame and I had to pry new part back and it broke (I had ordered extra). The screw actually lined up proper with the original hole in the frame. Door now runs like new.
Productos recomendados