No hay artículos en el carro
No hay artículos en el carroModelo de ventilador: PY-1225H12S Tamaño: 120 mm de largo x 120 mm de ancho x 25 mm de alto. Voltaje: 12 V. Corriente: 0,35 A. Ofrecemos productos de la mejor calidad a los clientes.
B. T. Cox
Comentado en los Estados Unidos el 22 de marzo de 2025
Our Mueller Nugget Ice Maker's (model NM-530) ice production slowed over until it stopped producing any ice. At this point, the fan outlet on the back of the machine had very little air flow and the back of the machine was very warm. After disassembling the ice maker and cleaning the condenser with a coil brush, it was easy to swap out the OEM fan with this one. The mounting holes for this fan are the same size/location as the OEM fan. The power cable was long enough to reach the fan power connector on the control board & the connector provided, while not exactly the same as the OEM connector, still had the correct wire polarity orientation and fit nicely into the control board connector without modification.Reviewing the datasheet for the OEM fan shows this item to be a close match. It has slight more CFM and a slightly higher noise level. While a bit more noisy, the noise level is quite tolerable.The ice production rate is now back to normal.
Jun Zhou
Comentado en los Estados Unidos el 19 de marzo de 2025
Direct fit for the ice machine. The only issue I had was the plugs are male and I had to cut the old ones from the old fans and convert them to female. Not a big deal.
Christie Anne
Comentado en los Estados Unidos el 26 de agosto de 2024
Great price I needed two for an ice machine and they're great.
Carlos Gomez
Comentado en los Estados Unidos el 16 de julio de 2024
Después de un tiempo empezó a sonar como todo típico ventilador pero hace su función.
MARTIN CENTENO JR
Comentado en los Estados Unidos el 17 de noviembre de 2024
I wanted to see if i could save my ice machine, because it seen to be the condensation from the tubing fried my fan. I taught it was easier to change fan than buy a new unit. The removal was straight forward but the fan was a easy setup. Plug and play. Once installed, it worked like before. Exact fit and quiet as before. I recommend for a ice machine replacement. Just a quick hint, put a small fan on your ice machine, if it make ice, the replacing fan is cheaper than buying a new one.
Kimkali
Comentado en México el 6 de abril de 2023
Hola;asta el día de hoy está trabajando muy bien,está trabajando mejor que el original más fuerza, más aire,muy potente.
Productos recomendados
Mex $337.00
Mex $ 151 .00 Mex $151.00
Mex $541.73
Mex $ 249 .00 Mex $249.00
Mex $460.00
Mex $ 239 .00 Mex $239.00
Mex $210.00
Mex $ 111 .00 Mex $111.00