No hay artículos en el carro
No hay artículos en el carro Feature:
NC means Normally Closed: When the magnet together, the circuit is conductive( light on ); when the magnet separates, the circuit is not conductive ( light off ).
NO means Normally Open: when the magnet separates, the circuit is conductive( light on ); When the magnet together, the circuit is not conductive ( light off ). When make order, pls check carefully
Specification:
Model: RC-36
Voltage: DC 100V
Rated Power: 10W
Cable Length: 25cm/9.8"
Actuation Distance: 15-20mm
Mounting Type: Recessed
Product Name: Magnetic Door Switch
Contact Capacity: 0.5A(Maximum Switch Current)
Cable definition: White Wire = Common, Gray Wire = Normally Closed, Red Wire = Normally Open
Package Content:
2 x Magnetic Reed Switches
Installation Instructions:
1. Drill the installation hole accordiong to the diameter.
2. The door and window magnet should be installed at the closed position of the door/window/drawer.
3. The magnet part is installed in the movable door and window. The switch part is installed in the fixed door and window frame. The switch part and the magnet part should be aligned as much as possible.
4. The door magnet should be away from the strong magnetic field interference source such as a transformer. Otherwise, the working characteristics of the door magnet will be changed and possible wrong actions.
NOTE:
Please allow 1-3mm error due to manual measurement, please make sure you do not mind before you bid.
Door magnetic induction can only provide a switch signal, which can not directly load the power, nor directly connect the lamp!
Hassle-Free Warranty:
Hxchen guarantee high quality and good service. Here with our 90-day money back risk-free purchase guarantee, order now! If you are not satisfied in any way, Refund or Replacement for any quality problem.
Mex $239.36
Mex $ 126 .00 Mex $126.00