No hay artículos en el carro
No hay artículos en el carroTegranita: negro.
JOSE ANTONIO
Comentado en España el 21 de marzo de 2025
Muy buen producto. Fregadero bajo encimera bonito y duradero. Lleva montado dos años y está como el primer día.Montaje sencillo y con todo lo necesario para su instalación.
Sergio albino ibañez
Comentado en España el 2 de octubre de 2023
Buen fregadero en este caso lo voy a utilizar integrado debajo de una encimera de piedra buena construcción y muy bien fabricado
Kevin Tremblay
Comentado en los Estados Unidos el 24 de abril de 2023
Battery’s don’t last long enough.
eric
Comentado en los Estados Unidos el 9 de julio de 2021
I knew this would be small, but it's smaller than I expected. A compact little tool that runs on Makita's 12v battery packs. Thankfully a charger is included as well as a battery since I only had 18v Makita tools before this.This kit is both a 2" sander and a 3" polisher. Good for sanding in tight spaces and can reach areas that 5" sanders just can't get into. Also nice for working on small areas for automotive paint correction. The polishing kit comes with several pads and can be used for buffing and polishing small areas and it also does well on corners and hard to reach spaces where a full size polisher doesn't work very well. A side handle is included to use this with both hands for more control.The brushless motor is operated with a trigger that makes it easy to adjust the speed, from 0 to 2800 rpm in polishing mode. There is a switch to easily change modes and it's clearly marked which mode is for which task. In sanding mode, the motor spins up to 9500 rpm. There is a locking switch on the side to keep it from accidently turning on when you aren't using it. There is a button on top to make it easy to unscrew the pads and quickly change from sanding to polishing, although I've never done both in the same day except for testing this tool. Polishing pads are held on with hook and loop material and the sanding discs screw on and there are several generic 2 inch sanding pads and flap discs available on Amazon, I believe the type is Roloc.Overall, a very powerful little tool for any detailer and it's also very useful for auto body repair. The quality in this tool is obvious as soon as you look at it and use it. It's a quality tool that should last many years and I really like the compact size. The included charger is similar to their 18v units, but it only works with the smaller 12v batteries. A Makita tool bag is also included in this kit.
Tell It Like It Is
Comentado en los Estados Unidos el 9 de julio de 2021
Makita is known for their quality. They hit another home run here. This 12 volt polisher/sander is intended for fine detail work. The 2 inch sanding or 3 inch polishing area lets you focus on a very confined area. There are plenty of tools out there for large area polishing or sanding, but this tool is pretty unique.It is well balanced. It is very ergonomic and easy to hold and use. It is quiet. The trigger is great. It comes with a battery, charger, and a nice selection of sanding and polishing accessories.
David Rocks
Comentado en los Estados Unidos el 8 de julio de 2021
I like to do woodworking and around the house DIY projects. I have for years depended on a very nice set of MAKITA cordless tools for many tasks. I got this to let me get into small spots for polishing, metal surface prep or sanding. Picture 1 shows the kit which as the usual excellent MAKITA instructions, 1 12Volt 2.0 Ah rechargeable lithium ion battery pack, one charger (Both in P.2), a 2 inch Roloc backer disc as well as a hook and loop Velcro type 3 inch backer disc, a few foam polishing pads for the 3" backer, and a screw in mandrel. The zip topped carry bag holds everything well and has room for extra discs, pads, etc. (P.7).There is a screw in control handle that can mount on either side of the tool by removing a plastic plug. P.4 shows the left side plug out with the sturdy metal threaded hole and P.5 with the handle mounted and my own Roloc 2" nylon mesh disc on the included 2" Roloc backer head. One twist and it mounts which is why I love Roloc!The battery is small as the tool is compact. I recommend recharging any lithium tool battery pack before it is fully exhausted to get best recharge life cycles from the pack. Lithium battery packs are almost never interchangeable between different brands of tools; unfortunately this comes with only 1 battery pack. The MAKITA quality12 Volt 2.0 Ah rechargeable lithium ion battery pack does incorporate a push button to light an LED display which shows charge remaining. (P.3).The mandrel screws into the tool front and lets me add backers that will fit its 1/4 x 20 threaded shaft. I have to be careful not to let this mandrel get lost as there is just the one and because it screws into the tool head I'd have to buy another from MAKITA if it got lost. Perhaps a 1/4 inch hex head might have been handier. There is a head rotation lock button to help screw on or remove pads.This compact Polisher/Sander has 2 speeds and no reverse. The trigger is variable speed with an "ON" trigger lock button. That gives me on Lo 0 to 2800RPMs and Hi 0-9500 RPMs NO LOAD. Great and very useful. This is strong enough and ideal to do small jobs like refinishing my car's headlight lenses. This won't polish my entire car as it is too small and doesn't use a random orbital motion to prevent swirl marks.This is super easy to controls and well set up for a compact tool. At this price I feel an extra battery should have been included.I Recommend this Makita VP01R1 12V max CXT Lithium‑Ion Brushless 3" Polisher / 2" Sander Kit (2.0Ah). Top quality compact MAKITA tool!I hope you’ve found the information and my review helpful.
nathan
Comentado en los Estados Unidos el 16 de julio de 2021
Makita delivers lots of power here for such a compact tool. I slapped a 36 grit 2” sanding disc on this thing, switched it to high speed, went at some rusted scrap steel, applying more than typical pressure, and it didn't flinch. At high speed, it runs up to 9500 RPM, more akin to an angle grinder, good for cleaning up, polishing, and finishing bare metal surfaces.But I suspect this has the most appeal to detailers as a polisher, for getting into tight places, and particularly for restoring headlights. It seems designed well for that purpose with the extensive use of rubber bumpers on the tool, leaving few edges that could possibly collide with your work and mar it.The handles sweep backwards – both the main and auxiliary – for better clearance. The auxiliary handle is ambidextrous, threading into either of the covered ports on the side.For safety, there's a lock-off button. And for convenience, there is a lock-on button, but it will only lock with the variable speed trigger fully depressed; it'll only lock at 2800 and 9500 RPMs. Any other speeds require constant attention to the trigger.The tool has a female 5/16-24 arbor. The included 3” polishing backer pad ports directly into that. The included 2” sanding disc backer has a female 1/4-20 thread, connecting via an adapter that is also included.As you'd expect from Makita, this is a high quality tool. And the kit having the charger and battery is a good start. Though professional detailers will want more batteries as the included 2.0Ah battery will not be sufficient.Also included are a few polishing pads and a nice Makita branded tool bag, appropriately sized to hold this kit. There are no sanding discs included (just the backer), but they're readily available and inexpensive.(Makita also makes an 18V version of this tool that's pretty much identical other than a slightly larger size.)
Productos recomendados
Mex $3,797.40
Mex $ 1,881 .00 Mex $1,881.00
Mex $1,490.40
Mex $ 715 .00 Mex $715.00
Mex $2,737.60
Mex $ 1,341 .00 Mex $1,341.00
Mex $10,178.99
Mex $ 1,881 .00 Mex $1,881.00