No hay artículos en el carro
No hay artículos en el carroDustin
Comentado en los Estados Unidos el 5 de marzo de 2025
Nice boards
Liam
Comentado en Canadá el 14 de febrero de 2025
A bit expensive but showed up fast, worked perfectly
John
Comentado en los Estados Unidos el 2 de agosto de 2024
6 pin USBC board. Already soldered a JSTXH connector to it for part of the mod I'm working on, no issue with the device showing power on the board I tested it with (power/data only). Only need 4 of the 6 pinouts since I'm not powering anything, so I don't need the CC pins, but nice to have them if your plans involve charging a battery.It's small and lightweight so it should do the trick for a few of the other mods I had planned as well using the board. Fits normal standoff if you'reComes as a single piece, but easy to break the perforated edges apart, no damage to either connector when doing so.Will be nice when I only have to deal with one cable to rule them all instead of multiple ones.
Wilson
Comentado en los Estados Unidos el 4 de julio de 2022
I only needed a USB-C connection to power a project but I was happy with the product. The 2 amps my circuit was created for charged and the correct amount.
John Fred Renalde Andrews
Comentado en los Estados Unidos el 18 de diciembre de 2022
I have a mechanical keyboard that has built in wires. I wanted to replace the wire with the coiled type for cable management. This product worked well. The circuit board was clearly labeled and the wiring diagram on the sellers page was a huge help.Tip, before you hot glue or fix the circuit in place, test if the keyboard works normally. It everything checks in, you can glue the unit in place. I though I had an issue it,but upon reviewing my work, there was a thin piece of hot glue “silk” blocking the connectors. I would use a different binding agent on the next project.One issue you may encounter is the placement of the circuit board after modifying the keyboard. I used hot glue to fix it in place.
Productos recomendados