No hay artículos en el carro
No hay artículos en el carroEl ladrillo eléctrico de la pedalera 1 Spot Pro CS6 de Truetone cuenta con un diseño elegante y de bajo perfil y potencia cualquier combinación de pedales en tu pedalera. Sus seis tomas de corriente totalmente aisladas minimizan drásticamente el ruido en su configuración. A bordo encontrarás dos salidas de 9 voltios, dos salidas conmutables entre 9 y 12 voltios, y otras dos salidas que son conmutables entre 9 voltios y 18 voltios. También obtendrás todos los cables y adaptadores necesarios. Los interruptores de palanca individuales en la parte inferior del ladrillo de alimentación te permiten configurar cualquier combinación de valores de potencia. Esto significa que podrás alimentar tus pedales existentes y también estarás cubierto cuando recibas nuevos pedales con diferentes requisitos de alimentación. La fuente de alimentación de pedalera Truetone 1 Spot Pro CS6 es una de las potencias más optimizadas y capaces disponibles en la actualidad.
misterdister
Comentado en los Estados Unidos el 22 de abril de 2024
I downsized my board to a pedal train nano plus and my voodoolab pedal power 2 no longer fit. When mounted, it fits just as perfectly (tried velcro first but it made it a bit too high). The mounting instructions were very say but I still managed to drill one hole slightly off despite the template. I just drilled another hole right next to it to widen and problem solved. The screws don’t stick out at all on the front side, but I would recommending drilling through the Velcro so that screw head sticks out as much as the Velcro - very small amount- and it’s then even surface.Power seems to work great and came with all the cables I needed. Love it!
Enrique Millan
Comentado en México el 9 de septiembre de 2023
La verdad me gustó mucho tiene varios cables para la conexión, y elimina el ruido muy contento con la compra
High Snows
Comentado en los Estados Unidos el 14 de diciembre de 2022
Wanted to get rid of the HX Stomp brick. Used a Voodoo Labs current doubler with center negative polarity to combine the two 500ma outlets into one input to the HX. Plenty of additional power for remainder of my small board. Have room for an additional pedal on dedicated line, and could daisy chain for more. Well thought out supply lines of various lengths. Great temple for easy drill and mount with no brackets needed. No noise. Solid value for money.
Joan Tuareg Chávez Medina
Comentado en México el 12 de abril de 2022
Simplemente el mejor, lo instale y me olvide de que existe, justo lo que necesitas de una fuente de poder
Ulises
Comentado en México el 4 de agosto de 2021
Silenciosa, gran calidad, espero conectar 14 o 16 pedales sin problema de saturación ni ruidos molestos.
Adán Ruiz
Comentado en México el 19 de julio de 2021
Es la mejor fuente de poder para pedales costo/beneficio.
Isaí Ramírez
Comentado en México el 7 de mayo de 2021
Se calienta
Eric G.
Comentado en Canadá el 19 de febrero de 2021
I purchased this power supply to get rid of a noisy echo pedal and it worked perfectly. Isolated power source with no or near no background noise when supplying multiple pedals from the same board. A great buy and value for its price. Note that it comes with a lot of accessory that should suit most of stompboxes...
A.Lee
Comentado en Australia el 16 de enero de 2021
I bought the One Spot CS6 to upgrade from an un-isolated multi-output power supply. I'm very happy with the low profile, light weight and quiet operation of this unit. I also like it's ability to power additional pedals with a daisy chain. It makes an audible difference if you've been using sub-standard power supplies and gives you confidence that it won't run out of "grunt" when you need it.
BotFixer
Comentado en los Estados Unidos el 15 de julio de 2018
Clean power supply, with electrically isolated plugs (no shared grounds or 9-volt power rails), lightweight, and most important for me: the LOWEST PROFILE (just under 1.25" tall) of any isolated power supply so it can fit UNDER a slanted wooden pedal board.I have an old Gator pedal board with custom tote bag (model GPT-PWR) and a power supply mounted underneath -- the Gator 8-port G-BUS-8 (). One day my pedal chain started sounded super hissy -- tons of high-pitched white noise. I eventually diagnosed that it was the power supply that was failing, not the pedals (had to disconnect and check each pedal on its own with a 9-volt battery).I did a ton of web searches for high-quality isolated power supplies and as far as I can tell this is the thinnest one made. Yes, it only has 6 output ports whereas the G-BUS-8 has 8. But if you have more than 6 pedals you can get a daisy chain cable and run several low-power pedals off one of the two 500 mA outputs. For example, here's a 3-to-1 cable (), and here's a 5-to-1 cable (). Yes, using a daisy chain cable defeats the purpose of an isolated power supply for the pedals that are chained together -- I'm just saying, if you need more than 6 pedals powered with the CS6, there's a simple way to do it.Finally, there is no obvious way to attach this thing underneath a wooden pedal board with screws -- the installation video on the Truetone web site shows how to do it for thin metal only. I decided since the unit is so light (1.3 lbs) I would try using velcro strips. I put 3 strips of hook velcro across the top of the CS6, with matching loop strips underneath the board, and it seems VERY secure under there.
Productos recomendados
Mex $499.99
Mex $ 239 .00 Mex $239.00
Mex $751.99
Mex $ 391 .00 Mex $391.00
Mex $399.00
Mex $ 179 .00 Mex $179.00
Mex $1,401.39
Mex $ 686 .00 Mex $686.00