Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Y&H - Micro inversor de red solar de 600 W con visualización de visualización de monitoreo de datos de CA, impermeable, IP65 MPPT DC28-50 V PV entrada AC80-160 V para panel solar de 24 V 36 V

Envío gratis en pedidos superiores a Mex $600.00

Mex $3,509.48

Mex $ 1,614 .00 Mex $1,614.00

En stock

1.Tamaño:600w-110v-lcd


Acerca de este artículo

  • Inversor de la serie WVC utilizando un diseño aerodinámico impermeable IP65 que evita eficazmente el agua de lluvia en la erosión de la superficie. Los microinversores convierten la energía de tus paneles solares en electricidad utilizable. Los microinversores monofásicos se utilizan generalmente en entornos residenciales y comerciales pequeños (soporte de conexión monofásica o trifásica)
  • Hemos mejorado la solución de cableado de CA. Configure convertidores para una instalación más rápida. Evita el riesgo de mal cableado del fuego, cero y cables de tierra. Mientras tanto, la entrada CC está diseñada con conector MC4 para evitar invertir los terminales positivo y negativo. (Algunos clientes extienden el cable del panel solar para que la polaridad positiva y negativa se invierta)
  • El inversor de rejilla puede monitorear en tiempo real la energía generada por el inversor a través del medidor digital de CA. (Voltaje, corriente, energía activa, energía eléctrica, frecuencia, factor de potencia) Sin riesgo de incendio y descarga eléctrica durante la instalación y operación debido a la baja tensión CC (hasta 50 V) en comparación con al menos 200 V de inversores de cuerda
  • Inversor solar de atadura de rejilla adecuado para panel solar de 2 x 250W-300W 36V (Vmp30-39V; Voc36-50V) Vmp = voltaje de funcionamiento; Voc = voltaje de circuito abierto. Optimizado para módulos de alta potencia de 60 celdas y 72 celdas*. Cada rama MC4 no puede superar los 30000 W
  • Conexión apilable; detección de fase de alta precisión; protección contra sobrevoltaje y bajo; protección contra frecuencia; protección contra islas. Casi no se requiere trabajo de mantenimiento, limpia el polvo en el panel fotovoltaico ocasionalmente.


Inversor de la serie WVC utilizando un diseño aerodinámico impermeable IP65 que evita eficazmente el agua de lluvia en la erosión de la superficie, función MPPT de seguimiento de punto de potencia máxima de alto rendimiento integrada que permite rastrear cambios en la luminosidad solar y controlar diferentes potencia de salida, capturar y recoger eficazmente la luz solar transmisión de energía eléctrica de CA utilizando la tecnología de transmisión inversa. La potencia de salida del inversor puede proporcionar un uso prioritario de carga, electricidad adicional a la red, convierte eficientemente la luz solar en energía limpia y verde.
Paramentos:
Modelo: WVC-600W.
Voltaje nominal: 120 V.
PV: 2 x 250 ~ 300 W.
Reccommend PV (Voc): 34 ~ 50 V CC.
Voltaje de seguimiento MPPT: 28 ~ 40 V CC.
Corriente de entrada máxima: 26 A.
Corriente de salida nominal: 4,58 A.
Máximo unidades por rama: 5 unidades.
Rfrecuencia: interruptor automático 50/60 Hz.
Temperatura ambiente: de 40 °C a +65 °C.
Dimensiones: 283 x 200 x 41,6 mm.
Peso: 1,56 kg.
Refrigeración: autorefrigerante.
Certificado: CE.


pb
Comentado en los Estados Unidos el 27 de marzo de 2025
When i first hooked it up with 8 198watt bifacal panels in parallel i got 26 watts. Reduced panels to 4 and got 16 watts. Then i hooked all 8 panels in series and running fine producing around 800 watts. Now i am happy
john
Comentado en los Estados Unidos el 16 de marzo de 2025
Installed was working 1st day. 2nd day i saw 1 green 1 red half stopped .working. cheap crap.
Placeholder
Comentado en los Estados Unidos el 6 de enero de 2025
I used this inverter with two 200 watt panels. The data monitoring screen was really helpful and let me know my panels were working immediately. I put the monitor into a weatherproof box that is mounted under my panels, which lets me see how my system is doing without having to do any complex wiring.
Vana Kurat
Comentado en Canadá el 4 de septiembre de 2024
My DC output from the solar panel is 116 watts. When I connect the inverter the output from the inverter is only 10.4 watts AC. This translates to an efficiency of about 9% for real AC output. The Power Factor is only 0.25
Peanut brained Bill
Comentado en los Estados Unidos el 8 de enero de 2023
I bought this for a friend to get her start in solar power on her house. It is plug and play. We had it up and running with two solar panels I gave her in about 15 minutes. You can't get electrocuted by the plug, it has to be plugged in and detect electric inside of the house. After it detects electric it will start a 90 second count down until it starts feeding electric to your house. In her case this unit and the solar panels basically cover all of the light bulb use in the whole house.Only one con. The con is the meter seems to need to be covered, there are exposed wires. We got an old clear tupperware container, took the lid off, cut a slit and hole in the side of the body,then we put the meter and part of the wire into the container, duct taped up around the hole and the slit, then snapped the lid back onto the container, which helped strengthen the slitted area and the unit is waterproof and you can read the meter through the clear container. We still like that they put the meter on this unit though. It's fun for my friend to look at the meter and see how much electric she is producing.
Productos recomendados

Mex $954.46

Mex $ 458 .00 Mex $458.00

4.3
Elegir

Mex $1,933.25

Mex $ 831 .00 Mex $831.00

5.0
Elegir

Mex $470.57

Mex $ 225 .00 Mex $225.00

4.9
Elegir