No hay artículos en el carro
No hay artículos en el carroDescripción del producto
1. Instala el soporte en el artículo con un tornillo más corto.
2. Usando el nivel para equilibrar el agujero, marca el agujero
3. Utiliza la broca para taladrar los agujeros. Insertar anclajes y tornillos
4. Colgar
sarah trobacher
Comentado en Canadá el 20 de marzo de 2025
Heavy duty. Came with all accessories, even a concrete drill bit!. Was easy to install.
Jeff
Comentado en los Estados Unidos el 28 de enero de 2025
I used a pair of these cleats to hang a large painting measuring more than 10 feet wide. The longer cleats work really well because they permit you to hit multiple studs. The holes are drilled to align with 16" studs which made attachment easy. I used very long construction screws to go directly into the studs, which is advisable. But the hardware also came with a nice assortment of plastic anchors and screws that would be useful for added strength in drywall or masonry. I was especially surprised to see they even included a mortar drill bit for an SDS hammer drill, which few homeowners are likely to have. This would make very quick work of any hard masonry. Once placed level on the wall, the cleat system permits considerable horizontal adjustment which making them strong, convenient and forgiving. This job would have been infinitely more difficult using anchors alone.
DJ
Comentado en los Estados Unidos el 5 de abril de 2025
These work awesome for being able to quickly shuffle around tool or part organizers. I doubt these would hold heavy metal garage cabinets without quadruple brackets on the back of the cabinet. I cut them to size for my organizer with an angle grinder and it took considerable time. Definitely quality metal (cross section pictured). I got everything lined up perfectly so I can slide the organizers over, no lifting needed to reposition them. One tip; if you do multiple cleats, do the top row first so you can hang it while fitting the bottom row and use a good level. I under estimated how many I’d need to hang 8 cabinets.
T. Slinkard
Comentado en los Estados Unidos el 7 de abril de 2025
The screws for mounting the mount to the mirror were 3/4 inch long instead of the size on the package which said 1/2 inch making them unusable. Also, the screw anchors weren't compatible for 1/2 inch drywall making them unusable. Basically, I had to provide the proper fasteners for the install.
Jim Jock
Comentado en los Estados Unidos el 18 de diciembre de 2024
I was a little intimidated hanging something as heavy as an expensive custom floor mirror. After we had this delivered we decided that we would try anyway. Vacuuming and cleaning around the mirror wasn’t something we wanted to do weekly.I used the 30 inch cleat and was able to screw to the studs on the wall with just two screws. I used every screw hole on the back of the mirror out of an abundance of caution.I pre-drilled all of the holes to avoid splitting the mirror’s frame and the wall holes as well to make certain I was getting the studs. I didn’t use the drill bit that came with the kit, but it looks sturdy and will go in my tools.It was easy to install and I feel it will hold well. I was actually very impressed with the ease of hanging once everything was secured.This was my first French Cleat and I think I could use it for other things as well. The stud finder was an huge help and made me feel confident it will hold.
Productos recomendados
Mex $641.83
Mex $ 301 .00 Mex $301.00
Mex $1,649.00
Mex $ 791 .00 Mex $791.00
Mex $296.86
Mex $ 142 .00 Mex $142.00