No hay artículos en el carro
No hay artículos en el carro
Característica:
1. Hecho de acero con alto contenido de carbono, no es fácil de usar y tiene una larga vida útil.2. Cada conjunto de dos escariadores, en bruto y fino, cumple con diferentes requisitos de trabajo.
3. Disponible en una variedad de modelos para satisfacer la mayoría de las necesidades laborales diarias.
4. Mano de obra fina, alta precisión, alta eficiencia de corte.
5. Un reemplazo para el roto o desgastado.
Especificación :
Condición: nuevo
Tipo de artículo: escariador de cono Morse
Material: acero con alto contenido de carbono
Tipo de agujero mecanizado: agujero cónico
Cantidad: 2 piezas de escariadores (escariador áspero + escariador fino)
Modelo opcional: MT1 #, MT2 #, MT3 #, MT4 #, MT5 #
Lista de paquetes:
1 x escariador grueso
1 x escariador fino
M. Boyd
Comentado en los Estados Unidos el 5 de julio de 2024
Initially, I was not impressed with the fact that the product had what looked like rust on it and the reamer still had bits of metal on the end from the production process. However, when I went to ream the hole after cleaning and oiling the reamers, I was impressed. Take your time with reaming and make sure your equipment is dead on so the reamer doesn’t wobble. You want to use just the right amount of pressure and you will get the job done. This is just the right size for custom tail stock that I’m making using #2 Morse Taper.
Matthew P.
Comentado en los Estados Unidos el 28 de julio de 2023
I'm refurbishing an old powermatic 90 wood lathe, and the MT2s on both the spindle and the tail stock were pretty gnarly. This cleaned them right up.
victor roy
Comentado en Canadá el 15 de mayo de 2023
Nice set of morse taper #2 reamers,easy to use, good quality for the price, made to be used by hand but you can use them in the lathe tailstock if you use the lowest speed and slow feed,and lot of cutting oil. Just let the cutter do his job ,dont force it- It made a nice smooth taper , very happy with the result.a good addition for the home machinist
FrankK
Comentado en los Estados Unidos el 6 de marzo de 2023
These are the same product you see everywhere under different names. Even where sellers use black and white or rotate the image to fool you. They are decently made. The cutting edges are lapped after grinding. They come in a small sliding box and are wrapped in paper (paper not labeled VCI). Overall they are a good choice for fixing up a beat to snot MT2 socket.
Clayton
Comentado en Canadá el 25 de octubre de 2023
Bang for your buck
Productos recomendados