No hay artículos en el carro
No hay artículos en el carroAce-Man
Comentado en los Estados Unidos el 10 de febrero de 2019
Mounted under cabinets. Wired with one controller. Fairly easy to install, the waterproofing material is a bit thick.
Rafy Levy
Comentado en los Estados Unidos el 3 de agosto de 2018
great product good price and fast shipper
GC
Comentado en los Estados Unidos el 15 de diciembre de 2018
The warm 2800k leds burned right after they turned on. It took only a second at 24.1V 5A. Cold 7000k light remained on w/o a problem.
Customer
Comentado en los Estados Unidos el 20 de septiembre de 2018
These lights provide wonderful illumination. In fact, the combined color of the two colors on the strip was so perfect for my application that we wired both in and didn't bother with a controller. With both strips on at full intensity, the lights run hot. I added a dimmer (be sure you have a dimmable driver) and the heat problem is gone and there is still more than enough light.I purchased the IP67 version of the product. The LEDs are inside a tube with a rectangular cross-section profile. Unfortunately, the adhesive on this tube doesn't hold the lights in place. In case you think it's a problem with the surface, there's another brand of LED strip running parallel to this one and the other strip has stayed in place for weeks without a problem. My package of lights came with clips but there aren't enough for the full length of the strip so I would suggest you look for an alternate product if you're counting on the adhesive alone being enough for your installation. In the photo you can see the white LEDENET strip drooping down and the tan strip adjacent to it, firmly in place. The large clip at the right is NOT on the ones that came with the set: they are small transparent plastic clips.If you aren't into soldering, be aware the roll I received came with leads already attached at both ends. I needed a third section and had to do a little soldering. As long as you can hit a small target precisely, it shouldn't be a problem. I am not an expert at soldering and was able to do it fairly easily.
Alec A.
Comentado en los Estados Unidos el 7 de diciembre de 2016
These things are very bright. they work great as camera studio lights
Productos recomendados