No hay artículos en el carro
No hay artículos en el carro- Inicio /
- Automotriz Y Motocicletas /
- Partes Y Refacciones
- Dirección Y Suspensión
- Motores Y Piezas Del Motor
- Cables
- Tracción Y Transmisión
- Luces, Bombillas E Indicadores
- Acondicionamiento Interior
- Frenos
- Filtros
- Arranque Y Piezas Del Motor
- Motores
- Tapas Y Tapones
- Limpiaparabrisas Y Partes
- Correas Y Tensores
- Sensores
- Encendido Y Accesorios
- Alternadores Y Generadores
- Embellecedores Y Accesorios Para Carrocería
- Sistemas De Escape Cat-back
/
- Frenos
- Kits De Hardware Para Tambor De Freno
- Cilindro De Freno De Las Ruedas
- Rotores De Discos De Frenos
- Sensores
- Pastillas De Frenos
- Piezas Hidráulicas
- Caliper Y Accesorios
- Cilindros Primarios
- Kits De Reparación Del Cilindro De Las Ruedas
- Mangueras De Freno, Líneas Y Conexiones
- Zapatas De Freno Y Accesorios
- Tornillos De Purga De Calibrador
- Sistemas De Servofreno
- Tornillo De Purga Para Cilindro De Rueda
- Cables
- Piezas Para Cilindro De Rueda
- Válvulas De Distribución
- Tambores De Frenos
- Kits De Piezas De Sujeción
- Kits De Hardware De Disco
- Válvulas
/
- Mangueras De Freno, Líneas Y Conexiones /
- Mangueras
Más información del producto
Good Maintenance Practices

Examine hoses every 12 months. Look for leaks, cracks, or rot. Replace when showing signs of wear.
Tighten any loose clamps. Replace clamps when replacing hoses.
Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
Periodically remove bugs, leaves, and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
Though electrochemical degradation occurs from the inside out, you can feel for voids, cracks, or weak spots. Squeeze the hose with your thumb and two or three fingers. If you’re not sure, remove the hose and check it visually.

Signs of Wear and Troubleshooting
Signs of brake hose wear may include:
Signs of electrochemical degradation include voids, cracks, or weak spots on the inside of the hose.
Signs of internal heat damage include slight swelling of the hose cover.
Signs of external heat damage include hardening or cracking of the hose cover.
Other signs of wear include oil damage, abrasion damage, brittleness, lack of heat/cooling within the cabin, ozone damage, and leakage of the hose.
FAQs

Q: Can a bulk hose detach during use?
A: Yes, make sure hose clamps are screwed on tightly when installing.
Q: Can a bulk hose freeze in the winter?
A: Yes – when there’s water in the hose. That’s why it’s important to follow the vehicle manufacturer’s recommendation on the use of engine coolant.
Q: Can I use the same bulk hose for multiple uses?
A: No, use the hose in the way it’s listed in the ACDelco belts and hoses catalog.
Q: Will I know when it is time to replace a bulk hose?
A: Yes, this requires inspection, though. When the engine is cool, squeeze the hoses with your thumb and forefinger near the clamps. Feel for soft or mushy spots. A good hose will have a firm yet pliant feel. Also, inspect for cracks, nicks, bulges (usually while hot), or a collapsed section in the hose and oil contamination, or fraying near the connection points.
Q: Are there steps I can take to ensure a longer bulk hose life?
A: No
Q: Will a worn bulk hose affect gas mileage?
A: No

Mex $808.56 Mex $808.56
Mex $ 380 .00 Mex $380.00
Mex $433.99 Mex $433.99
Mex $ 225 .00 Mex $225.00
Mex $453.81 Mex $453.81
Mex $ 204 .00 Mex $204.00
Mex $453.81 Mex $453.81
Mex $ 235 .00 Mex $235.00
Mex $629.29 Mex $629.29
Mex $ 346 .00 Mex $346.00
Mex $555.64 Mex $555.64
Mex $ 300 .00 Mex $300.00
Mex $1,138.88 Mex $1,138.88
Mex $ 512 .00 Mex $512.00