Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

ADT-LINK Riser PCIe X4 3.0 PCI-E 4X a M.2 NGFF NVMe M Key 2280 Riser Card Gen3.0 Cable M2 Key-M PCI-Express Cable de extensión 32G/BPS (15 cm, R42SF)

Envío gratis en pedidos superiores a Mex $600.00

Mex $530.00

Mex $ 249 .00 Mex $249.00

En stock

1.:10cm


2.Color:R42sf


Acerca de este artículo

  • Nombre de la marca: ADT-Link
  • Nombre del producto: Cable de extensión de placa adaptador PCI-E
  • Tarjeta aplicable: tarjeta de red de alta velocidad, tarjeta de captura, tarjeta de disco duro SSD NVMe, tarjeta adaptadora USB, compatible con interfaz PCI-E x4.
  • Ventajas del cable: utilizando el cable importado de patente alemán, utilizando los conectores Lotes que importaron de Taiwán, soporte de alta frecuencia PCIe 3.0x4 32G/bps transferencia estable.
  • Señal diferencial sin diseño de agujero, no hay problema de interferencia de atenuación de señal en una capacitancia parásita e inductancia parásita, no habrá más microcortocircuito CAF, el cable es duradero.


La longitud es personalizable, los precios del cable de diferentes longitudes no son los mismos, por favor ponte en contacto con nosotros si lo necesitas.
Descripciones:
Marca: ADT-Link
Modelo del producto: serie R42 de productos
Nombre del producto: Cable de extensión de placa adaptador PCI-E
Longitud del cable: 10 ~ 80 cm, soporte para personalización de pedidos por lotes
Velocidad de ancho de banda: PCIe 3.0x4 gen3; 32G/bps
Tarjeta aplicable: tarjeta de red de alta velocidad, tarjeta de captura, tarjeta de disco duro SSD NVMe, tarjeta adaptadora USB, compatible con interfaz PCI-E x4.
Nota: Este producto no es compatible con el exterior del portátil.
Descripción de la longitud del cable:
La longitud del cable se refiere a la parte del cable visible. No incluye la PCB ni el conector.
Ventajas del producto:
1. Ventajas del cable: utilizando el cable importado de patente alemán, utilizando los conectores Lotes que importaron de Taiwán, soporte de alta frecuencia PCIe 3.0x4 32G/bps transferencia estable.
2. Señal diferencial sin diseño de agujeros, no hay problema de interferencia de atenuación de señal en una capacitancia parásita e inductancia parásita, no habrá más microcortocircuito CAF, el cable es duradero.
3. El PCB utiliza alta frecuencia y baja resistencia de materiales con alta calidad, PCB con placa TG alta, grosor de cobre grueso a 1 onzas, chapado en oro suficiente oro, buen rendimiento conductivo, puede reducir la oxidación más alta impedancia causada por la visualización azul de choque.


Steve in Seattle
Comentado en los Estados Unidos el 8 de marzo de 2024
I tested this M.2 Type M to PCIe x4 adapter using an old Wi-Fi 5 card on an old HP Slimline S5-1214 mini-tower I recently installed Windows 11 on. I used a PCIe x16 riser card that I use for a NVMe drive, and it seemed to work fine.The Wi-Fi 5 card is an old ASUS model that only had support drivers up to Windows 10, but after installing the Windows 10 64-bit drivers in Windows 11 it detected and ran fine. Speed Test showed there was no speed loss between running though this adapter (and the riser card) vs just installing the Wi-Fi card directly in the slot.You can see the Frankenstein rig I used to test this adapter in the pictures. I plan on using this with an active PCIe bifurcation card in the future to salvage 4 PCIe lanes from my last remaining PCI slot and still get NVMe function.The SATA power cable seems well made. It doesn't have a locking tab but it's a good interference fit with the PSU cable so I suppose it's fine.Would definitely recommend for anyone looking to salvage an unused M.2 Type M slot for a PCIe card.NOTE: I tried to use test this adapter with an external 10 Gbps NVMe case, but Windows 11 wouldn't detect it at all. The external case goes through a USB 3.2 Gen 2 (Type C) port, so my guess is that the USB controller for that port simply wouldn't recognize a non-USB peripheral being connected to it, even though it's PCIe compliant. This adapter works great on the PCIe bus itself, but you won't be able to go through a USB bus to get there. It's possible you may get it to work on an old Express Card to M.2 adapter for old laptops, but USB seems like it's out of the question.
James K.
Comentado en los Estados Unidos el 3 de junio de 2023
Great product, works perfectly for my application, using this in a spare M.2 slot on an ITX motherboard to run the Elgato 4K60 Pro MKII and it works perfectly. Highly recommend this M.2 to PCIe riser if you are looking to build a SFF when you have a GPU taking up the main PCIe slot already.
miguel ramirez
Comentado en los Estados Unidos el 10 de septiembre de 2022
I was surprised to say the least it ran my rtx 3060 ti at pci x4 at 4.0 speeds straight up at boot since i have an intel 12 gen engineering sample with NO pci e x16 available on the cpu so this work around to connect the gpu directly to the cpu without having the chipset drive the gpu on the second slot
Paul
Comentado en Canadá el 16 de octubre de 2021
It works great. I should have gotten the 90 degree one but this still works.
Kendall Rigg
Comentado en los Estados Unidos el 7 de febrero de 2020
Works perfectly. Excellent quality. Actually uses all 4 pcie lanes. Unlike a certain white m.2 adapter found on amazon which only uses 2 lanes. The green adapter is even worse.Runs my Nvidia RTX 2080 Super with my "pocket" PC flawlessly. Highly recommend this for use of external Graphics cards and other pcie device add-ons.Stay away from the cheap adaptors with the pcie slot directly on the card if you trying to run graphics cards or other high speed devices. You will suffer from a bottleneck.
Productos recomendados