No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Especificaciones:
- Voltaje de entrada: CC 5-24 V
- Corriente máxima: ≤ 6 A
- Salida: 1 canal
- Potencia de salida: 5 V < 30 W
- Potencia de salida: 12 V < 72 W
- Potencia de salida: 24 V < 144 W
Atenua tu vehículo con regulador de intensidad ALOVECO de 12 V CC
Consejos:
1. Tira del pomo directamente del regulador para quitarlo en lugar de girarlo
2. Conecta tu dispositivo con el regulador de intensidad y la potencia correcta
- 5 % -100 % suavizado atenuación ✔
- Interruptor de encendido/apagado ✔
- Protección contra sobrecarga
- Resistencias integradas
- Anticorrosión
- Disipación del calor
- Vida útil de más de 60000 horas
Interruptor regulador de intensidad de CC ALOVECO
Múltiples usos:
Siempre y cuando esté dentro del rango de trabajo: DC 5-24 voltios, ≤6A, 30-144W, este regulador de intensidad es perfecto para caravanas, coches, remolques, camiones, barcos y todos los sistemas de 12 V
Interruptor de atenuación del 5%-100%
También se puede utilizar como atenuador, este producto ofrece un rango de atenuación del 5 al 10 % y función de encendido y apagado. Gira la perilla completamente en sentido contrarreloj, cuando hace clic, está completamente apagado.
Calidad prémium
Carcasa de aluminio de alta calidad. Anticorrosión-Disipación de calor. Vida útil de más de 60000 horas
Disfruta de tu viaje con ALOVECO
Siempre estamos aquí para ayudar, solo siéntase libre de contactar si hay algún problema con el interruptor regulador de intensidad ALOVECO, simplemente disfrute de su viaje
Customer
Comentado en los Estados Unidos el 27 de marzo de 2025
i have a 12v fan in my freightliner for extra cooling during hot weather. just a normal truck stop special. it came with a 12v cigarette plug. didn't like all the extra wire on the dash,so i purchased this switch and hard wired the fan into the dash. that means disecting the fan plug to expose the wires, making sure of the correct polarity i was able to wire in the new switch easily as it comes with good directions. the fan is 12v but says nothing about how many amps it draws so i wired a 10 amp in line fusible link for added protection. works great! just make sue of the thickness of what you are mounting it on as the stem is kinda short. works good so far, highly recommend !
lepack
Comentado en Canadá el 24 de marzo de 2024
Does what it’s suppose to do, dim 12v lights. RV replacement light needed a switch. Thought a dimmer switch would be great to control the intensity of the light. Worked out great!
James
Comentado en Canadá el 6 de diciembre de 2023
this dimer works from off to very dim to FULL brightness without any flickering. it is small and easy to install. I highly recommend this dimmer switch. I use in my van to control 2 small LED light bars mounted on the front bumper. Just be sure to keep within the dimmers amperage rating.
Jon S
Comentado en los Estados Unidos el 30 de marzo de 2022
I built a 12v power supply (gasless generator) and included a 12v LED flood light. Turned out the light was really bright; too bright for some applications. In looking for a dimmer this popped up, along with others. Bought it based on the good reviews, and I liked the 4 wire hookup, which would make wiring it in a bit neater than the 3 wire hookup the others had. And the price was “right”.In reading other comments, it was clear that this needed to be wired exactly per the instructions, which I did. Worked perfectly. Dimming action is very smooth from full bright to very dim. No jumps in brightness. The 4 wire hookup is perfect for this. The light is about 12w which this handled with no noticeable heating. Things to note - I have noticed a bit of a hum at times. For me, not loud enough to be bothersome. The whole thing is surprisingly small, including the knob (about 1/2” across) and the body is about the same. This worked for my application, but might be a consideration for others. The threads for mounting worked on a piece about 1/16” thick, but would not be good for a piece much thicker. The internals are potted with what appears to be silicon, which, on mine, sat a little proud with respect to the edges of the case. On mine this was very minor, an had no affect on mounting it; just an observation. Overall, I would recommend this.
Phillip Tanner
Comentado en Canadá el 28 de enero de 2022
The inputs and outputs shown on the package don't match the configuration imprinted on the actual switch, that being said, I used the markings on the switch itself and it works really good. I was particularly concerned about buying a cheap dimmer and getting flickering on my LEDs, this switch works great, zero flickering even at minimum setting. The knob has a good feel, nice positive click to turn off and then a nice weight and smoothness throughout the ON range which is 5-100% intensity, less than 5% there's a detent and it switches off. Easy to mount on a panel.
Productos recomendados
Mex $349.14
Mex $ 174 .00 Mex $174.00