No hay artículos en el carro
No hay artículos en el carroGary
Comentado en los Estados Unidos el 8 de febrero de 2025
I used this product to replace a water tank with a leaky bladder in our Reverse Osmosis system.Installation is very simple, just unscrew the fitting from the old tank and screw it onto the new one.If pressure below the bladder gets too low you can use a bicycle pump to pump it back up.
Maxwell
Comentado en los Estados Unidos el 2 de abril de 2025
My old tank barely spat out 12oz (=1 can of soda) before coming to a dribble.New tank able to fill 24 cans quickly...and it keeps on going. Hope it holds this way for a couple of years.
Louise c.
Comentado en Canadá el 6 de agosto de 2024
Pas super
Julio Cesar Ramirez Arguello
Comentado en México el 4 de julio de 2024
BUENA CAPACIDAD
Maria Eugenia Elizondo
Comentado en México el 26 de mayo de 2024
Fácil de instalar siguiendo instrucciones
C. Brucker
Comentado en los Estados Unidos el 3 de diciembre de 2024
I bought this to replace the stock tank for my RO system from GE. The old tank was barely putting out two cups of water at a time. However, the stock replacement was going to be around $150, so I was looking for a cheaper option.Since this tank is carried by the same store that I bought the RO system from, and they have it labeled as an "industry standard" in terms of pressure settings, I decided to give it a try. And so far, it works great! Much better pressure, and I get a lot more water out of the system at a time. Notably too, the water tastes better! Maybe because it's not mixing with old, stagnant water that can't be expelled.Super easy to install! Bought a shut off valve fitting to connect the tank to the plastic line of my system, and managed to connect it easily. Be sure to use plumbers tape on the fitting. I also used an O-ring for good measure. So far, no issues with leaking, as other people are reporting in their reviews.
shopper99
Comentado en los Estados Unidos el 14 de diciembre de 2024
No issues.Would have been nice if tank already had a valve.I needed to remove the valve from the old tank and move it over, not a big deal.The bladder in these tanks only lasts a few years so regular replacement is needed.You can tell if the bladder is ruptured by how fast it loses water pressure when filling a container.This was a pretty good price for the tank.
Productos recomendados