No hay artículos en el carro
No hay artículos en el carroMás información del producto
Aquatic Life Aquatic Life Smart Buddie Booster Pump for 50-100 GPD Reverse Osmosis Systems
YOUR Water MADE Better! Increase the Efficiency of your RO System with the Smart Buddie Booster Pump
Exclusive Features:
- The sealed pressure pump is low-voltage and powered by the included transformer, which ensures safe, quiet operation.
- The Smart Buddie Booster Pump includes an internal automatic flush valve that flushes the membrane for 18 seconds every time the unit is activated.
- A built-in low pressure switch turns off the Smart Buddie Booster Pump if water pressure is less than 7.25 PSI, extending the life of the pump.
- Increasing water pressure can significantly decrease consumption of DI resin in RO/DI systems.
Compact & Lightweight - Just like our famous RO Buddie's!
Dimensions: 11.75"L x 5.88"W x 7.88"H. Weight: 8lbs.
Aquatic Life Smart Buddie Booster Pump for 50 - 100 GPD RO Systems
Reverse osmosis is a pressure-driven process - Improve the quantity and quality of your water.
RO booster pumps are used to increase the pressure going into your RO or RO/DI system which makes it operate more efficiently and provide better quality filtered water.
RO Systems THRIVE Under Pressure!
Designed as an accessory for Reverse Osmosis units in areas with low water pressure, or for users that want MAXIMUM output and the BEST QUALITY filtered water from their RO systems. The Smart Buddie booster pump is quiet, easy to install, and can significantly increase water output. Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate on very low pressure--down to 35 psi--but the reality is you won't get a lot of water and the product water quality may be compromised if the unit runs below 45 psi. RO units typically run well on municipal water pressure of 60 psi, but they run even better with a small pump to boost the pressure to 80 psi or higher. The increased pressure will also improve the economy of the unit (it will run less reject water) as well as the quality of the water. RO units thrive on pressure!
Sam Santoyo
Comentado en México el 15 de julio de 2023
Las instrucciones son muy claras para instalar.Aún con buena presión, normalmente tardaba 2 a 3 horas en producir 20 litros (con mi RO Buddie+DI 50 GPD). Ahora con la bomba, tarda máximo 1 hora.Redujo el agua de desecho (waste water) a la mitad.Una joya de producto.
Horst Neumann
Comentado en Canadá el 13 de noviembre de 2022
Works awesome use it to make water for our saltwater aquarium used to take over 2hrs to make 5 gallons of R O water lots of waste water we are on well for our water now with the pump takes 45 minutes to make 5 gallons cuts down on waste water and hydro on the well pump highly recommend if you are on well supply for your home
jamie
Comentado en el Reino Unido el 1 de septiembre de 2022
It best for 50 to 75 gal a day , wen the water very low , but wen the water pressure in good then get 50 to 100 gal a day the pump can be upgraded bigger pump but will not fit the small box , you will need know how too fix wires to giver in safe way so it doesn't cash on fire . I am running 2 pumps on it work well . Geting 92psi Saves me lots time , swishing pumps is no go me because the wires , I wish made it easier for me by making difficult sized pump systems for more bigger fish takes and ponds .
Claudia
Comentado en México el 5 de mayo de 2021
La bombita me ayudo mucho ya que sin ella es sistema express water no funcionaba en mi casa. Fue un poco dificil de instalar.
Brock R.
Comentado en Canadá el 9 de mayo de 2017
Using this pump has increased the output of the RO Buddie it's connected to by 3 times. It's still working great after a year of doing 300-400Gal a week.
Dio
Comentado en Canadá el 6 de enero de 2017
Wonderful product to compliment your existing RO system. This is a must have if you want to increase your filtered water production and decrease the waste water. Very easy to install and the customer support is very helpful. The only issue I have is the pressure valve is very sensitive to pressure changes that when my float valve rise a bit but not enough to close it. The pump cycles on and off in one sec intervals.I still need to figure out a way on how to rectify that but that is not the pump's fault.I have been using it for two weeks and very please with it. Hopefully, the pump will last long. I might get another one if the price goes down as a backup.
Cliente de
Comentado en México el 24 de julio de 2016
Fue muy fácil de instalar, trabaja perfectamente, la recomiendo ampliamente y el precio es bastante competitivo, sobre todo por todo lo que ofrece, más su diseño pequeño
Lovely
Comentado en los Estados Unidos el 15 de junio de 2016
I normally don't write reviews, but this impressed me. I originally was going to purchase the Aquatec 8800 Booster Pump Kit but then I saw this and Amazon had it the cheapest for under a hundred bucks and Aquatic Life is currently offering a 15$ mail in rebate if purchased in June. So i couldn't resist and ordered with free 2 day prime shipping. Instructions were pretty simple to follow and you can also watch the videos for installing. I have a BRS 150 GPD dual membrane 6 stage RO/DI unit. I have 68 PSI coming in from my supply line. This boosted it to 90 PSI. I like that it has built in Automatic Flush valve that flushes the membrane for 18 seconds every time the unit is activated so that I don’t have to manually do it, and automatic shut off. I figure if any parts fail at least I still have a booster pump that I can remove and use for fewer than hundred bucks vs the 149 for the Aquatec Booster kit. Right? Anyways, so for the test.My TDS is 239 and Pressure is 68 PSI going into filtersWith booster the pressure is 90 PSI going into MembranesOut the First Membrane TDS is 4, Percent Rejection = 98%Out the Second Membrane TDI is 6, Percent Rejection = 97%Out first stage DI TDS is 0Out second stage DI TDI is 0I also connected another TDS meter to the output of the unit since someone reviewed that they were getting 5-6ppm after the unit and I wanted to make sure mine didn’t do that or else I would return it. But TDS coming out of the Smart Buddie was 0. So far so good. Now for the best part. I tested how long it would take my 150 GPD unit to produce 1 gallon of RO/DI water pushing 90 PSI through the membranes and it took 5 minutes and 35 Seconds. So if my math is correct, converting everything to seconds. There are 1440 Minutes in 24 Hours. Which converts to 86400 Seconds and 5 Minutes 35 Seconds converts to 335 Seconds. So 86400 / 335 = 258 GPD? Impressive! So it boosts my output give or take 100 GPD over the 150 GPD rated. That’s just my 2cents. For now I love the unit and will update if anything changes.
Productos recomendados
Mex $3,640.38
Mex $ 1,492 .00 Mex $1,492.00
Mex $20,867.05
Mex $ 1,881 .00 Mex $1,881.00
Mex $593.16
Mex $ 320 .00 Mex $320.00
Mex $4,619.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $5,526.34
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,019.00
Mex $ 969 .00 Mex $969.00