Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

ART dPDB Caja directa pasiva de 2 canales

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,697.47

Mex $ 763 .00 Mex $763.00

En stock
  • Dos cajas en una
  • Señales de nivel de altavoz: la capacidad del dpdb para aceptar entradas de nivel de altavoz desde la salida de un amplificador de potencia permite que las señales de post-amplificador, post eq y efectos se alimenten directamente a la consola
  • Señales de salida de guitarra eléctrica y bajo: la señal de alta impedancia de una pastilla de guitarra o bajo se traduce por el dpdb en una señal equilibrada de baja impedancia requerida por la mezcla de consolas
  • Teclados y señales de nivel de línea: equilibra y coincide automáticamente con las salidas de nivel de línea de los teclados electrónicos modernos


La nueva caja directa pasiva dPDB cuenta con dos cajas directas de alta calidad en una caja portátil. Es un DI sólido de roca, digna de carretera para la conexión de las salidas de instrumentos musicales electrónicos (u otras fuentes de audio) a las entradas equilibradas de consolas mezcladoras y otras entradas balanceadas.


Stefano
Comentado en Italia el 12 de marzo de 2023
Okay
Peewee-speaks-out
Comentado en Alemania el 24 de enero de 2021
I have a number of these units now. The are VERY well made, built like a brick and provide all the functions you need from a good DI box, i.e. though out, dB reduction, ground lift etc.A useful thing I use these for is if you have an amp modeller and do not bring an amplifier to gig, or you use the line out (with simulated speaker) of the amp, I always run them though one of these regardless if there is an XLR output or not. Many guitar amp simulators (mainly the older ones) with XLR outputs are not protected against 48v phantom power, which can damage some units or if not damage them it can severely affect the sound.Therefore my main use of this is protect my amp modeller from a bad sound engineer. I know there is no chance of sending 48v in any of my equipment using this for the sound engineer to plug his XLR cables into.Regardless of guitars and amps, you can use these for drum machines, keyboards to convert a non-balanced jack plug to a blanced output to send through very long cables. I have my own so I don't have to rely on the equipment at the gig I am going to. The nice things about this is that it is for stereo.Superb, well built device.Highly recommended!
Jay
Comentado en Canadá el 28 de marzo de 2019
good quality casing, solid build.
KH
Comentado en los Estados Unidos el 12 de julio de 2017
Both the outside and inside of this unit look great! Heavy steel case, quality components, only a few hand soldered connections, transformer is securely glued to the circuit board. Nice diagram on top making it very clear how things are connected. Everything including the switches are CLEARLY labeled (in my opinion some aren't or you can't tell which position of the switch(s) engage a particular function). I like how the attenuation switch is reasonably well protected from getting bumped/changed during handling between gigs (some have push button switches that look like they could be easily changed by accident) Tested it and the attenuation switch operates smoothly with no noise or fussiness. Frequency response was measured to be 3 dB down at 5 Hz, almost no loss at 20 Hz; at the high end, less than 1 dB loss at 20 kHz.
Mr Pele
Comentado en el Reino Unido el 19 de noviembre de 2016
Good stuff
Productos recomendados

Mex $984.90

Mex $ 482 .00 Mex $482.00

4.9
Elegir

Mex $2,578.88

Mex $ 1,212 .00 Mex $1,212.00

5.0
Elegir

Mex $13,980.00

Mex $ 1,881 .00 Mex $1,881.00

4.8
Elegir

Mex $6,292.07

Mex $ 1,881 .00 Mex $1,881.00

5.0
Elegir