Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

AsiaHorse - Enfriador de tarjetas gráficas con ARGB 5 V 3 pines LED y tres ventiladores de 80 mm, soporte para tarjetas gráficas LED RGB, enfriador de GPU, fácil instalación

Envío gratis en pedidos superiores a Mex $600.00

Mex $609.99

Mex $ 329 .00 Mex $329.00

En stock

1.Tamaño:Coolerpro


2.Color:Blanco


Acerca de este artículo

  • 𝑫𝒐𝒃𝒍𝒆 𝒑𝒓𝒐𝒕𝒆𝒄𝒄𝒊ó𝒏: el enfriador de tarjetas gráficas Asiahorse está diseñado con 3 cuchillas de ventilador de 80 mm y soporte de soporte de GPU, puede generar un fuerte flujo de aire para soportar la refrigeración de la tarjeta gráfica, mientras que proporciona un soporte fuerte y duradero para proteger la placa base de ser dañada por el peso de la tarjeta gráfica.
  • 【𝑬𝒏𝒇𝒓𝒊𝒂𝒎𝒊𝒆𝒏𝒕𝒐 𝒓á𝒑𝒊𝒅𝒐】Función de control del ventilador Pwm, permite un ajuste dinámico de velocidad entre 800 y 3000 RPM, nivel de ruido de hasta 25 DBA, minimizando el ruido o maximizando el flujo de aire.
  • 𝑫𝒊𝒔𝒆ñ𝒐 𝒅𝒆 𝒎𝒂𝒓𝒄𝒐 𝑳𝑬𝑫 𝑨𝒓𝒈𝒃: 13 LED RGB independientes integrados en cada ventilador, compatible con sincronización de placa base ARGB de 5 V y 3 pines, ofreciendo una variedad de modos de efecto de luz ARGB para añadir fácilmente iluminación LED vívida a tu sistema.
  • 𝑨𝒋𝒖𝒔𝒕𝒆 𝒑𝒓á𝒄𝒕𝒊𝒄𝒐: fácil instalación, el brazo de soporte se desliza y se bloquea en su lugar para enfriar la tarjeta gráfica directamente en paralelo o vertical con tres ventiladores RGB de alto flujo de aire, proporcionando el ajuste más fácil para permitirte utilizar fácilmente varias combinaciones de tarjetas gráficas y carcasas de PC.



Descripción del producto

1
graphics card holder
2
graphics card holder

1

SUPER VOLUMEN DE AIRE

El volumen de aire supergrande mejora significativamente la temperatura de la tarjeta gráfica.

1

VOZ BAJA

Ventilador ultra silencioso para un entorno de trabajo más cómodo

1

AMPLIO ÁMBITO DE APLICACIÓN

Universal GPU Cooler, adecuado para la mayoría de las tarjetas gráficas

1
1

Christopher Munguia Hernández
Comentado en México el 8 de marzo de 2025
No enfría absolutamente nada. Le bajó 1° solamente a mi tarjeta de video. Totalmente inútil.
Luis Carlos
Comentado en Brasil el 3 de abril de 2025
Esse "Air coller" pra placa de video auxilia na refrigeração, há menor desgaste (trabalho) das Fans (ventoinhas) da placa, e com RGB embeleza seu PC
Felipe Gonzalez
Comentado en México el 21 de febrero de 2024
La verdad esta buena la refrigeración con soporte y muy bonito rgb le quedo perfecta a mi gráfica 4070 la cubre casi toda sin duda le bajo mucho la temperatura a mi gráfica y se sincroniza con el rgb de tu mobo,.el soporte es estable y aguanta bien mi gráfica
Alejandro A.
Comentado en México el 21 de septiembre de 2024
Funciona muy bien reduce un poco la temperatura me gusto.
Fake Namington
Comentado en Canadá el 4 de enero de 2023
Cools the GPU when its fans are shut off which is nice, really low idle temps now. Looks dope.
tatle_navarro
Comentado en México el 27 de agosto de 2022
Es muy corta para una RTX 3090
Christian
Comentado en México el 7 de marzo de 2022
Es bueno el producto, de buena calidad. Aunque si queda ligeramente flojo, pero.no afecta en absolutamente nada a los ventiladores, no hace ruido y ventila bien. Buena iluminación.
Ricardo R
Comentado en México el 9 de septiembre de 2022
Mi RTX2070 ya requiere cambio de pasta térmica por lo que en idle estaba normalmente en 50 C - 52 C. Debido a que se cambiará la tarjeta por una que ocupa mayor volumen de aire, este enfriador bajó la temperatura a 44 C, lo que detiene totalmente Los disipadores de la tarjeta.Es muy silencioso y fácil de instalar. Lo detecta sin problema el software para RGB
Juan M Cazeneuve
Comentado en México el 29 de agosto de 2021
Cumple con el objetivo de bajarle unos grados a la temp, el rgb funciona, solo hay que encontrarle el conectar correcto. No hay instructivos.
jonathan
Comentado en Canadá el 15 de julio de 2021
. Fits into rgb on motherboards or a rgb fan header or control box displays any color you want on the light strip. Minimal noise. Got it under my Asus tuff 3080ti and when in idle the gpu has a 0 dB fan so when the gpu does not hit a certain temperature it won't run the fans this cooler helps cool it off a bit and in that state I don't see it go above 40c at all. Downside it's a little unstable since it don't sit in a pci slot just has 1 screw holding it
Margaret M.
Comentado en los Estados Unidos el 27 de noviembre de 2021
I have an MSI RTX 3060ti, 2 fan model, and it gets hot! There's a hotspot on the card that my temp monitoring program picks up and before I installed this GPU cooler, the temp on that hotspot would be over 91c. With the GPU cooler installed, it still runs warm but now rests around 88-89c. The core GPU temp doesn't go above 75c on max load. I didn't expect it to make my graphics card chilly, but it does enough to notice the difference. As for noise level, I think it's just as loud as all my other case fans, so I can't really pick out the sound specifically. I have it just plugged into a regular fan port on my motherboard, so it runs on full speed all the time, which is fine. The noise is not enough to bother me, and certainly isn't as loud as my graphics card running at 100 percent fan speed!As for the mounting system, I saw a lot of reviews with complaints about it, but I actually think that the mounting brackets are nice sturdy metal. The brace on the front of the fans, the part that has the LED strip, is strong and prevents the cooler from sagging. I didn't even remove any of the dust shields from the back of the case, I just installed the cooler right over the top of them, screwing the screws into both the mounting bracket and the dust shields, as seen in one of my pictures. When I first set it in there, it did look a little droopy, but I just bent it upward a little and it stayed. I can even push on it and it won't sag.The ARGB light strip is pretty cool. It syncs up with all my other fans in the case and lights up an otherwise darker spot. It kind of tied the whole look together, really. I think it's pretty great! I would buy again!
Luis García
Comentado en México el 18 de octubre de 2021
Cumple su función, lo compre para una GPu 2060 super y logra bajar de 4 a 5 grados. Sin embargo,recientemente al encender la computadora, emite un sonido que no debería (supongo que alguno de los ventiladores empieza a fallar), aunque no dudo que puedan cambiarse.
Melroy Simon
Not sure why people are complaining about the bracket, this really fits well and does the job. Seen a difference in temps by 10 to 12 degrees for the graphic card.Well built and the RGB lighting looks great.
Productos recomendados

Mex $679.00

Mex $ 305 .00 Mex $305.00

5.0
Elegir