Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Astromania Universal Quick Release Finder Shoe Base for Schmidt Cassegrains and Other Telescope 130-400mm Diameter - for MQR III&IV/Witty One and V-Br

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,156.00

Mex $ 543 .00 Mex $543.00

En stock

Acerca de este artículo

  • Material de aleación de aluminio: hecho de aluminio de alta resistencia con proceso de aluminio anodizado. Base de zapata de aluminio sólido mecanizado de precisión en negro mate, para casi todos los soportes de visor, para el accesorio Tangent "Witty 1", etc., se adapta a todos los radios de barril de lente
  • Fácil de instalar】 Dos tornillos grandes moleteados hacen que sea fácil de instalar: las bases cuentan con dos grandes cierres de tornillo para asegurar el alcance del buscador o la visión reflejada en su lugar, incluso mientras llevas guantes. Simplemente colócalo en el tubo óptico y aprieta los tornillos
  • Multifunción: hay dos agujeros alargados en esta base y un solo agujero avellanado para tornillos de hasta M5 en el medio. Dos tornillos están en el lateral de la base. La distancia entre los puntos centrales de los agujeros del tornillo es de 24 a 1.614 in


Color:Universal Release Base La base se puede utilizar en telescopio que no tienen por sí mismos una base, o se puede utilizar en otra posición diferente en el telescopio como base adicional. Por favor, asegúrese de medir su rango de separ


Randy Herring
Comentado en los Estados Unidos el 5 de febrero de 2025
I was immediately sold when I read Gary Elble's "Mount Bracket" review and ordered mine and paid the extra for same day delivery. It mounts perfectly to my Celestron 6se for my new Astromania 9x50 finder scope.
J. Bailey
Comentado en los Estados Unidos el 1 de junio de 2024
Bought to hold a finder scope - works well. Feels very solid.
Customer in Canada
Comentado en Canadá el 7 de marzo de 2021
Replaced the original red dot finder base with this one as I could not get the original celestron provided out of box red dot finder to align to the 5SE telescope. This product works well with the Nexstar with no additional holes required to be drilled. I also replaced the original celestron provided red dot finder with a finderscope with cross hairs. The combination solved my problem of lack of alignment. Recommend product.
Gerardo
Comentado en México el 27 de diciembre de 2021
quedo perfecto para un puntero laser en mi astromaster 130 eq.
Joseph Chen
Comentado en los Estados Unidos el 25 de enero de 2021
This finder scope base is a perfect fit for my Nexstar 8se. I recently purchased a StarSense AutoAlign and wanted to dual mount it on my 8se with my existing finderscope. In order to do that, I needed to purchase 2 things: 1) You need a Vixen Dovetail finder base to attach to the 8se optical tube assembly (OTA) since it doesn't come with one. 2) You need to purchase a dual or triple mount finder scope bracket. The StarSense AutoAlign comes with a large bracket, which can be used to connect directly to the OTA, as well as a smaller Vixen Dovetail bracket, which is what I will be using with this finder base.I previously purchased another cheaper finder base on Amazon but it had 3 problems: the stock screws were too wide to fit in the finder base (this requiring you to buy new screws separately), the screw holes were too narrow by approximately 1mm, and the Vixen Dovetail mount was slightly too small so the AutoAlign would only fit half-way into the mount!I'm glad to say that this product by AstroMania has none of those problems. The stock screws easily fit so you don't need to buy any new screws. The screw hold are widely spaced out and easily fit the 8se OTA. And the mount itself easily fits the AutoAlign.This finder base is really well made. The curve under the mount perfectly lines up with the 8" OTA. And the hand screws are really smooth and don't wobble when turning. This finder base also has 2 hand screws instead of 1 screw like some of the other cheaper finder bases so you can feel comfortable mounting a lot of weight on the base.One nice thing I noticed is that the thickness of the metal at the center of this base is much thicker than the cheaper finder base I first bought. It seems much sturdier and less prone to bending compared to the other finder base.I noticed that AstroMania also sells another finder base for SCT telescopes. At first I was going to get that other one but I realized that the screw spacing is up to 37.3mm for that base, which is about the same as the first finder base I tried. So that other AstroMania base would probably have been too small for my 8se since the screw spacing is between 37-38mm. On the other hand this base has spacing up to 41mm, which easily fits the 8se's screw spacing.
Jeremy
Comentado en Canadá el 26 de septiembre de 2021
Easy to install, sturdy and fit my Celestron Edge 8HD
Productos recomendados

Mex $2,071.51

Mex $ 932 .00 Mex $932.00

4.3
Elegir

Mex $380.00

Mex $ 197 .00 Mex $197.00

4.4
Elegir