No hay artículos en el carro
No hay artículos en el carroEl Atlas pH científica circuito está diseñado para proyectos de Arduino y tiene una amplia gama de aplicaciones. Un sistema de control de pH muy compacto que cabe en cualquier placa de pruebas, Este diseño configuración permite al usuario controlar con precisión el pH sin ningún tipo de circuitos adicionales o componentes. El PH-sello proporciona lecturas de grado científico a cualquier sistema embebido que tiene un RS232 interfaz de conexión (voltaje de oscilación 0-VCC, no + / - 12 V). Formato de datos es el ASCII y comunicación con el PH-sello se realiza utilizando sólo 11 órdenes sencillas. Requiere (no incluido) de la sonda. Fundada en 2005, Atlas es el líder de la industria en científica incrustado de detección química. Esta empresa altamente especializada se centra todos sus recursos en la fabricación de los mejores sensores químicos y productos químicos de la prueba en el mercado hoy en día. Atlas con orgullo científico ofrece su tecnología a las personas, profesionales de la industria, y defensa de los contratistas de todo el mundo.
Average
Comentado en los Estados Unidos el 22 de diciembre de 2023
As someone who once sung the praises of Atlas Scientific products, I feel obligated to spread the information that they leave out of their data sheets and documentation. First and foremost, there is NO SUCH THING as a glass bulb pH meter that can be indefinitely submerged and maintain a high degree of accuracy for more than a few hours. It took several hundred dollars, a lot of researching, and hours of trial and error to find out that pH probes are NOT designed to be out of their buffer solution for more than a few minutes. Don't make the same mistakes I did.
Android Zulu
Comentado en los Estados Unidos el 12 de septiembre de 2021
I was using a pi zero. First ph sensor I was able to put into i2c mode by following the online instructions by removing the ground wire to the sensor but the address failed to populate so I set it back to uart mode and was able to send a command. Then the sensor got hung up. It became unresponsive. Replacement came in but I was unable to power off the sensor by disconnecting ground to put into i2c mode. Sensor stayed powered on with just the vcc.
Ethan L.
Comentado en los Estados Unidos el 23 de agosto de 2020
Works great. I had issues at first but it was due to not fully reading the datasheet. I could not get this ph circuit to function properly with the Raspberry Pi. Half of the time it would display incorrect results or not show at all. The device was being powered incorrectly because I had it plugged into the 5v and not the 3v pin on the raspberry pi. Hope this helps someone who runs into the same issue. After connecting it to the 3v pin, it functions flawlessy.
Guy That Buys
Comentado en Canadá el 15 de junio de 2020
Works great. Documentation to set it up is online. Easy to follow. Seller through in an extra BNC connector for me. Yay!! Thank you. Took a bit to arrive, but packaging was great. Would buy again. Is there another place in Canada to order these from?
B.Smith
Comentado en los Estados Unidos el 4 de diciembre de 2017
Using this interface board is really a no-brainer. Atlas has really made accurate reading of pH probes so simple with this board. I use this board with an Atlas pH probe and it's interfaced to a Raspberry Pi 3 Model B using I2C for communications. I can't say enough good things regarding Atlas or their equipment. Use this pH board and probe if you want accurate, easy, painless pH data in your projects!
Productos recomendados
Mex $303.04
Mex $ 154 .00 Mex $154.00
Mex $239.00
Mex $ 143 .00 Mex $143.00
Mex $399.00
Mex $ 203 .00 Mex $203.00
Mex $1,589.00
Mex $ 794 .00 Mex $794.00