No hay artículos en el carro
No hay artículos en el carro Modelo: CUA Cushion Plunger
Marca: Bicaster
Material: eje de cobre + aluminio.
Rosca: 5/16"-24
Longitud ajustable: 17,5-26 mm.
Adecuado para: arcos recurvos, arco desmontable, funciona con el resto de flechas.
El paquete incluye: 1 émbolo, 1 núcleo extra de cooper, 2 resortes adicionales, 1 llaves, 2 llaves Allen. Producto: descanse de hover. Material: aleación de aluminio. Color: negro. Tamaño: 71,5 x 18,6 mm. Peso neto: 12 g. Características: 1. El rodamiento está hecho de aleación de aluminio 7075, ligero y más duradero. 2. Rebote magnético suave, te ayuda a disparar con precisión. 3. Se puede fijar firmemente al elevador de arco con el cojín. 4. La aguja es ajustable, tanto de arriba a abajo como de izquierda a derecha.
Adeptus mechanicus
Comentado en España el 12 de diciembre de 2024
No se pudo cargar el contenido.
E D
Comentado en Alemania el 8 de diciembre de 2023
Haltbarkeit und Präzision habe ich noch nicht getestet, dürfte aber nicht schlecht sein da die Verarbeitung sehr gut ist und das Material hochwertig. Kommt mit allen nötigen Anbauteilen, Schrauben und Werkzeug zum einstellen. Das Zollgewinde 5/16 - 24 UNF auf dem Plunger war allerdings ungewöhnlich und hat mich gezwungen einen Gewindebohrer zu kaufen, damit ich eine neue Buchse anfertigen konnte in die ich ihn einsetzen konnte.
Manuel A.
Comentado en México el 18 de julio de 2022
Artículo llegó en buenas condiciones, buena calidad del producto, la herramienta que incluye están perfectas.
Cliente de
Comentado en México el 6 de junio de 2022
Es de buena calidad por el precio y fácil de instalar.
Penny Robinson
Comentado en Canadá el 5 de enero de 2022
Good arrow rest and plunger. No worries about arrow falling out. A lot easier to hit my target.
AnthonyF
Comentado en los Estados Unidos el 12 de octubre de 2021
I can't say enough about how big a difference switching over from a hunter style rest over to this plunger and arrow rest was. It helped alleviate some of the issues of stiff spined arrows and the vanes impacting the riser on my 66"26# SAS Spirit. (Obviously getting softer spined arrows should be the long term fix, but that will be down the road for me.)Although there are no micro adjustments for the vertical and horizontal position of the arrow rest arm, it can be adjusted by loosening the appropriate screws on the arm and swivel, adjusting the position and then re-tightening. Also, you get a second chance with the arm horizontal position with another adjustment screw whose primary purpose is to adjust the resistance offered by the magnet, but also coincidentally changes the arm position.The plunger is properly sized for modern metal/fiberglass recurve bows to give you maximum adjustability for centershot position. It'll also work great for wooden recurve bows like the OMP Adventure 2.0 which have thinner center sections. For my SAS Spirit which has a much thicker center, the plunger's button nicely clears the riser, but only about 2mm of the plunger will make it out of the Berger hole and still give you full range of adjustability for the stiffness of the spring. If you know exactly what setting you need for plunger stiffness and have no plans of changing it on the fly, you can set the plunger in deeper if you need to.The particular arrow rest I got had small defect where arm screw was coming loose after about 60 arrows. I kept on re-tightening the set screw until I finally stripped the set screw after over 100 shots. The seller worked with me to figure what went wrong and to get me a replacement. Awesome customer support and service!If you are starting out and are looking for a great value for your money, be sure to give this plunger and arrow rest set a try.
Doornster
De stang van de steun moet nog wel worden "bijgebogen" maar blijft daarna goed zitten. Het magneetje heeft nog een bijstelmechanisme, handig.
Productos recomendados