No hay artículos en el carro
No hay artículos en el carroHole Opening Sizes: 3-7/8" - for large raised panel cutters (plate opening with no rings inserted) 2-5/8" - great for medium size cutters (yellow ring) 1-1/4" - with offset for brass guide bushings or smaller cutters (red ring) Includes: 1 Plate 2 Snap Out Rings 1 Shoulder Pin 3 Cam Action Adjusters
Customer
Comentado en Canadá el 24 de marzo de 2023
I want something fast, this doesn't even come close, I want precision or as close as I can get. I'll make my own out of 3/8 acrylic
Stephane Paradis
Comentado en Canadá el 12 de enero de 2022
It's very good, very solid. Holds a large router very well. Lots of space for new screw holes for pretty much any type of router! Small or Large! I recommend it because for a lower price budget, if can't afford the more expensive ones with height adjustment, it's a very good substitute.
C,Mark
Comentado en Alemania el 16 de octubre de 2021
Gut Geliefert, Gut bearbeiten
John Hinton
Comentado en los Estados Unidos el 6 de marzo de 2019
I put a straight edge across the base longways and found it had what appeared to be a huge gap in the middle. I pulled out my feeler gauges and micrometer to get a real measurement. It did turn out the reflection I suppose made it look twice as bad as it was. The actual measurement was 1/32" low in the middle at the edge of the black plastic next to the rings. That might not sound like much, but when using something like a beading cutter, round over bit and many others, this would be 'easily' visible on your project. It would make a difference on fitting parts together. It's just not an accurate insert. I did reach out to Big Horn via their website to find out what to do and received no response.I have now completed the request to return this product and will not try another one. Quite simply this is an inferior insert. Sadly the rest of it seemed to have good design and nice features. Just poor execution.
BRS Parts
Comentado en los Estados Unidos el 15 de julio de 2018
These is very well made and well worth Money -- Off center black pucks are to lock in opening work very well - Also includes 4 magnets that get set in corners and setscrews to adjust depth -- Would highly Recommend and buy again.Drill all holes slowly from top to bottom and do not use brad point bits - plastic will blow out causing chips -Only Con -- No Instructions at ALL -- not really needed but would have been nice -- Excellent Product
Cliente de
Comentado en México el 29 de noviembre de 2016
el producto cumple su función, lo que no me agrado mucho, es que es de plástico(o algo asì como una resina, yo esperaba que fueran de metal, todo es de plástico, es quebradizo, pero con muchos cuidados cumple su función bien
Productos recomendados
Mex $1,739.00
Mex $ 799 .00 Mex $799.00
Mex $4,919.14
Mex $ 1,881 .00 Mex $1,881.00