No hay artículos en el carro
No hay artículos en el carroBig Horn 19408 - Inyector de pegamento de alta presión con 2 puntas de latón. Repara fácilmente conjuntos delicados y mucho más con el inyector de pegamento de alta presión de Big Horn, con puntas de latón. Ideal para pequeñas manualidades y pasatiempos, además de que proporciona hasta 550 psi de potencia presurizada para entrar en las áreas más pequeñas. Características: Proporciona hasta 550 psi de potencia presurizada. Incluye inyector de pegamento de alta presión y puntas de latón de 1-16 pulgadas y 1/32 pulgadas. Uso con pegamentos a base de agua. Más información Modelo # UPC 76656656 54444 º de 89 WARNING California Proposition 65 Brand
Maitrikkumar Patel
Comentado en Canadá el 18 de diciembre de 2024
Heavy duty needle
Mark M.
Comentado en Australia el 18 de mayo de 2023
I used this to inject glue under timber floor boards. The syringe can take a lot of pressure and is easy to clean dried glue out because you can take everything apart.
DJ McSlick
Comentado en los Estados Unidos el 27 de noviembre de 2023
So I purchased a DriTac repair kit and this injector kit together. The syringe and needle/injector that came in the box kit worked well for 8 holes (there was a bunch of air pockets in my engineered wood floor!), then it bent, was clogged and would no longer work. I switched over to this Big Horn product and immediately saw an improvement; in my ability to put pressure on the syringe, on the leverage holding the Bog Horn syringe/handle, and especially on the brass tips! It's important to clean out the syringe and tips, but this product rocks! The only thing I wish was different is I had purchased a much larger syringe. This will certainly work, but you may have to fill it multiple times to fill a large space. One other tidbit of info, it may be me, but I noticed I was able to get a much better flow when keeping the brass tip just a smidge off the floor. I was probably blocking some of the flow by pushing the brass tip against the floor a bit much, but once I raised it 1/32 or 1/16 from all the way in, the adhesive/floor leveling liquid flowed much more quickly. Highly recommended!
Draco Bellator
Comentado en México el 9 de abril de 2022
El aplicador es muy útil para inyectar pegamento, de muy alta viscosidad, en pisos de madera de ingeniería. Eso sí, requiere fuerza para utilizarlo. Muy buen producto.
Pericombobulation53
Comentado en los Estados Unidos el 18 de febrero de 2021
Let me fully endorse the use of this glue injector for filling gaps under hardwood flooring. What a great technique! I installed bamboo flooring in our upstairs hallway and for whatever reason, in one spot the boards didn't get glued to the floor properly during installation. Walking over the spot was annoying because you could easily feel it under foot. It felt like walking on a trampoline!I drilled a tiny little hole near the center of the problem area, right on a knot, so you can barely see it. Then I filled it with wood glue using this injector. I was shocked at how much it took! Nearly an entire bottle of glue went into that tiny hole. I marked it off with masking tape so we wouldn't step on it for a few days and voila, worked like a charm! Feels nice and solid underfoot now.
DOUGLAS BETTS
Comentado en Canadá el 20 de diciembre de 2021
Used this to glue down my hardwood floor squeeking. Best little thing I have bought in a long time.
Productos recomendados
