No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Diseño actualizado
El soporte parpadeante solo está diseñado para la cámara Blink Doortimbre.
Está específicamente hecho para cámaras parpadeantes, no requiere tornillos, y se monta rápidamente en la pared en 2 segundos.
Consejos: si tu timbre Blink es de la última generación, necesitas quitar la placa trasera del timbre y luego instalar el soporte parpadeante
Flexible y fácil de usar
- Instalación en dos direcciones
- Instalación sin perforación
- Protege las paredes
- No influye en el audio bidireccional
- Protección para todo tipo de clima
Protección para todo tipo de clima
El soporte para timbre está hecho de materiales especiales. Especialmente la cubierta de parpadeo puede cubrir completamente el sistema de cámara de tu timbre para evitar daños por viento, lluvia, sol, etc.
Contenido del paquete:
1 carcasa de plástico resistente a la intemperie
1 soporte para timbre parpadeante
1 cinta VHB 3M de grado más fuerte
1 juego de tornillos
Nota: el timbre de video parpadeante no está incluido
J-Fine
Comentado en los Estados Unidos el 24 de enero de 2025
Easy to mount and keeps the doorbell perfectly protected. It does not interfere with the doorbell functions at all and it has a clean aesthetic that does not look out of place near your door!
kimberly jumper
Comentado en los Estados Unidos el 15 de enero de 2025
Easy install, perfect fit over my Ring doorbell camera and doesn't obstruct the camera view in any way. Has held up through a summer in the south, including a hurricane. Well made product and definitely worth the money.
RAY
Comentado en Canadá el 4 de noviembre de 2024
Looks great, sturdy, offers protection, easy to install and fits perfectly. These are much better than the Blink mount that comes with the doorbell which is very breakable and difficult to remove for battery changes. Blink should be sending these with their doorbells.
Ipalomin
Comentado en México el 25 de octubre de 2024
Buena imagen y audio.La conexión presenta un retraso aún teniendo cerca un repetidor de señal wifi
HonestReviews
Comentado en Canadá el 9 de noviembre de 2023
5 out of 5 Stars (5)⭐⭐⭐⭐⭐[TL;DR][QUALITY] (5/5)[VALUE] (5/5)[EASE OF USE] (5/5)[MET EXPECTATIONS] (5/5)[PACKAGING] (5/5)[REVIEW REMARKS]I ordered this when my back panel on my Blink doorbell broke off all of the connecting plastic pieces while I was changing the batteries at the end of summer leading into the fall weather. The plastic does degrade in our Canadian weather. The act of popping off the doorbell from the wall and replacing the batteries snapped all of the connectors effortlessly. I ordered a replacement back panel and I wanted to start off on the right foot.I got the idea for using this device. It fastens to the wall with the included screws or adhesive, I chose the screw route. The Blink fits inside, with the panel attached and covering the batteries. The front snaps in the moulded grooves, holding everything in place. When you need to change batteries, there is a release on the bottom that you can trigger using your finger. The whole Blink unit can then come off the wall out of this mount, leaving the mount in place. You can then bring it in the house to acclimatize before you pop the back plate off with the Blink doorbell removal key. The plastic is now not subjected to temperature related stress when you are putting the unit back together after changing the batteries. It takes the stress off the plastic latches and you can better visualize the connection holes, over trying to line it up on the wall and potentially breaking them off.All in all, I wish the Blink doorbells shipped with this type of enclosure. The plastic is moulded to allow for the bell to be rang, the mic to be uncovered, and the lens is covered slightly by a hood on the top. The strain of popping off the unit and reattaching it to the wall is mitigated. This will prolong the plastic pieces that connect the unit to the backplate. The mount also protects the Blink doorbell from the elements, which is excellent for our situation and how our doorbell is exposed to wind and cold.I recommend this unit based on the easy install, seemingly good manufacturing quality, and how it solved our issue without creating further issues.In the event that experiences change or evolve, updates may be made to this review to address such developments.
Douglas
Comentado en Canadá el 21 de noviembre de 2023
The item is exactly as described. I'd give it 5 stars if it actually locked but I knew it didn't before purchasing it. I bought it for the protection against the crazy weather. I have it installed in an area that gets a lot of wind and rain. It ruined my last doorbell so I thought I'd buy this and see if it helps. Install was really easy. The mounting holes are in the exact same location as stock blink doorbell. I wish the front cover plate was a tad more snug to the camera because there's a slight gap between both parts but the camera is designed for rain. It's mostly trying to stop the storm weather elements. Time will tell but I like it so far.
Productos recomendados
Mex $383.03
Mex $ 183 .00 Mex $183.00