No hay artículos en el carro
No hay artículos en el carroCustomer
Comentado en Canadá el 20 de agosto de 2024
Good replacement!
Radesh Roy
Comentado en Canadá el 18 de noviembre de 2024
Products works great. Not too expensive.
Kurt C.
Comentado en los Estados Unidos el 4 de septiembre de 2024
What I liked was that it was easy to replace and the price was right.What I didn't like was how the adjustment was so touchy.I hardly have the setting turned on to get a temperature swing from 31.4 to 40.9.Anything more and the fridge was getting way too cold.But..... it works and I didn't have to purchase a new fridge.I gave a 4 star because of the temperature setting too touchy....
Power Reader
Comentado en los Estados Unidos el 21 de febrero de 2023
The temperature control on my 25 year old GE fridge was not working correctly. It would cool to the proper temps, then turn off, and occasionally not come back on. By turning the Temp Control knob on/off and jiggling it, the fridge would come back on. This got worse and worse.The part number for my temp control is WR09X0599 (also WR9X599). This part is not available anywhere. I contacted 5 repair shops and none of them would work on my fridge since the part was no longer available, and they all recommended replacing the fridge.I saw a review from Penny J that seemed to have the same problem, so I ordered this part.Short version ... it worked!! My fridge is now working properly again for $15. I did not have to buy a new fridge (and have my almost fine fridge toss into a landfill).Details on this part:- the packaging was non existent! It had been in a flimsy box inside an envelope, and had come out of the box, so it was basically shipped in an envelope. How it survived that I do not know.- I did have to bend the mounting tabs slightly to line up with the holes where the previous controller was, about 2mm adjustments on both sides- I did have to get 2 screws to fit- the temp probe part is about 4" shorter than my original X599 controller , but it was still enough to go into the freezer area and the temps in the fridge/freezer are perfect- once installed, getting the temp right in the freezer did require some adjustments to the set screw. The large temp control knob makes fine adjustments to the temp. But the small set (preload) screw makes larger adjustments. At first, the freezer temp went to 20 degrees and stopped. The set screw is located right next to where you push the larger temp control knob on. In the end, turning it 1.5 turns counter clockwise got my freezer to zero.- It is working great, zero in freezer, 37 in fridge, all fixed for $15!!
BC Vernon
Comentado en Canadá el 8 de marzo de 2021
Replaced a 29-year old thermostat by GE Canada. Had to reshape mounting tabs. Frig temp was too high even at max. cold setting. Found calibration screw (from online research) in opening beside main knob shaft and turned CCW in 1/2 turns until satisfactory temp control range was achieved. Seems OK now.
Productos recomendados