No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Calidad prémium
Este engranaje de gusano mezclador cuenta con un engranaje de plástico de alta calidad y un cubo de metal resistente que garantizan una alta durabilidad y promueven la eficiencia.
- Garantiza una larga vida útil
- Fácil de instalar
BlueStars W10112253 - Mezclador de gusano
Ajuste perfecto, alta calidad y fácil de instalar
El engranaje de gusano mezclador W10112253 tiene un diámetro de pulgada y media. Se utiliza para algunas de las marcas de mezcladores Whirlpool.
Corrige el siguiente síntoma
Touchpad no responde.
- Fácil de instalar
- Fabricado con materiales de alta calidad
- Amplia compatibilidad con las especificaciones OEM
- Sin productos químicos nocivos y seguro de usar
- Larga duración
Ajuste perfecto
Compatible con la mayoría de las marcas principales (KitchenAid, Whirlpool, Kenmore) y sustituye a los números de pieza: 4161531, 4162897, 4169830, WPW10112253, WPW10112253VP, PS11748374, AH1491159, EA1491159, AP4295669, 1206513.
Calidad prémium
El producto está hecho de materiales fuertes y duraderos que evitan grietas y fallas durante el proceso de instalación y uso.
Solución de ahorro
Disfruta de la gran sensación cuando tu mezclador está reparado y funciona correctamente como antes. BlueStars ofrece soluciones de bricolaje para ayudarte a lidiar con cualquier problema.
Acerca de BlueStars
En BlueStars, nos dedicamos a hacer tu vida sencilla, cómoda y cómoda con soluciones de reparación de bricolaje económicas para tus electrodomésticos.
La fiabilidad es lo que buscamos. Le ofrecemos no solo productos de alta calidad, sino también excelentes servicios de atención al cliente 24/7 que garantizan su satisfacción.
Soluciones de reparación Compre con la promesa de confianza
Las piezas de repuesto de BlueStars están fabricadas con materiales duraderos y de alta calidad libres de productos químicos nocivos. Al hacer numerosas pruebas y revisiones estrictas realizadas por nuestros ingenieros experimentados y equipo de desarrollo, comprometemos todos los productos a cumplir con los estándares OEM y son seguros de usar.
También apoyamos a los clientes con una cobertura en todos los productos y servicios de atención al cliente 24/7 que garantizan una experiencia de compra feliz. Todo es para nosotros construir una relación de confianza con la que usted puede contar.
Adi
Comentado en los Estados Unidos el 17 de enero de 2025
Part arrived in time. Compared it with the worn-out OEM part removed from the mixer. The dimensions appear to be similar. Installation was very easy following the procedure described in YouTube videos found online. Mixer is working well. Hopefully the part is durable.
B. Blauer
Comentado en los Estados Unidos el 20 de febrero de 2024
You can't tell from the pictures or looking at these when they arrive, but this gear fails to make any sort of dough because the metal doesn't bind to the plastic. Under moderate loads for any kind of dough, the metal spins independent of the plastic, so the motor goes but the dough hook stops spinning.I bought a two pack of these, knowing that they might not be quite as good as the original and might need replacing a few years sooner. I had no idea this kind of design flaw could even exist, so when the first replacement didn't seem to make a difference, I investigated all sorts of other causes before finally realizing it's just a crappy part.Being willing to give benefit of the doubt that maybe one part was just defective, I replaced it with the second part. It took a while before we made bread again, but it also failed on the first attempt.To steal a quote from Billy Madison, this product is one of the most insanely idiotic things I have ever purchased. At no point in the rambling, incoherent product design were you even close to anything that could be considered a rational replacement part. Everyone in this customer ratings section is now dumber for having purchased it. I award you no points, and may God have mercy on your soul.
Silke Billig
Comentado en Canadá el 26 de enero de 2024
I repaired my KitchenAid stand mixer and replaced the worm gear. Seems to work fine.
Steve
Comentado en los Estados Unidos el 10 de abril de 2024
My wife was making rolls for easter when the mixer stopped turning. If I moved it a little manually, it would take off again but then fail before making a full turn. After one search it was apparent that this was an extremely common issue and this part is actual built to fail to save the motor. I didn't even bother taking the mixer apart to diagnose it and just ordered this part and some extra food grade grease.I watched a couple videos on how to take it apart and then took mine apart. All the videos said that there is a ton of extra grease in these machines even after taking out the contaminated portions with the shredded gear mixed in it. They are correct, don't bother buying extra grease if this is your first time doing this. My worm gear looked exactly like the worn out one in the videos where 4 or 6 teeth from the gear were just completely worn away.Now I saw where there is also a complete worm gear assembly you could buy instead of just the gear. It takes 3 screws to replace the entire assembly and the pictures of the replacement one looked exactly like mine minus the brass part. The 3 screws for the housing are easy but you have to clean up the assembly after you remove it. Then there is a little pin to get the gear out. Getting the pin out was fine. Replacing the gear was fine. For some reason getting that little pin all the way back in was a nightmare for me. I finally did a go-for-broke-and-fullout-muscle-it because if I broke it, I would just order the full replacement housing. My last all out attempt finally set the pin flush just like before. I don't know if I will be able to get it out again if I ever need to use the second replacement gear.I put everything back together and used the remaining grease to re-grease the assembly again. The mixer now operates normally. Even if I would have given up on the gear replacement and purchased the fully assembled worm gear housing, I would have still spent only around a tenth of what it would cost to replace the mixer.
Ron
Comentado en Canadá el 23 de enero de 2023
The gear fit properly and the mixer worked fine. Time will tell if it is durable
Ernesto Ch
Comentado en México el 27 de octubre de 2020
Mi batidora perdió fuerza con este engrane. La corona del engrane es ligeramente diferente a la original. Ahora Ni siquiera puede mezclar una masa base para pie.
Productos recomendados
Mex $339.74
Mex $ 173 .00 Mex $173.00
Mex $553.21
Mex $ 276 .00 Mex $276.00
Mex $494.47
Mex $ 252 .00 Mex $252.00
Mex $355.98
Mex $ 177 .00 Mex $177.00