No hay artículos en el carro
No hay artículos en el carroEl sistema NGX Clamp Edge SystemTM hace que sea más rápido y fácil descomponer el material de la hoja: las tablas de cortar y cortar con cortes limpios y precisos cada vez. Ngx te da una precisión similar a la sierra sin la etiqueta de precio pesado.
Gilberto
Comentado en México el 24 de agosto de 2024
En la descripción dice nuevo, no viene en su empaque original,vino manchado usado y con un seguro roto.
Emmanuel Pérez Hernández
Comentado en México el 10 de agosto de 2024
Muy bueno
PG
Comentado en el Reino Unido el 18 de noviembre de 2024
the quality of the screws provided to use to extend tbe track are of very poor quality once you use then to screws the metal bars to hold the extending track once you try and dismantle the tracks the screws are of such poor quality that the heads are damaged and you are unable to unscrew the screws to take the metal bars apart, thus compromising the usage of the single track shorter track...I am therefore returning the track..great concept but unfortunately the quality of the product makes it not fit for purpose...you expect to pay a premium price and get great quality..but the price does not reflect the product and performance.
Jeff P
Comentado en los Estados Unidos el 26 de noviembre de 2023
When combined with the Bora NGX saw plate (for mounting a circular saw) this becomes a viable alternative to a high end track saw, but at a relatively low price. A good track saw is more accurate, but they can cost 8 times as much.I recently used this (with the addition of a NGX saw plate) to cut full plywood sheets for a Murphy bed project and the results were great. Much better than my old method of clamping a straight board the full length of the plywood and running the circular saw along the edge. That said, be aware that the clamp is narrow, so when used at full length it tends to inflect slightly in the middle if you are not very careful and this can affect cut accuracy. Also, tear out on plywood is still an issue, particularly when cutting against the top ply’s grain.If you are cutting 8’x4’ plywood frequently and need high quality cuts, invest in a track saw. However, if you do this only occasionally, then the Bora NGX system is a nice alternative and you will probably be happy you saved several hundreds of dollars that you can use for other tools you may also need.
Customer
Comentado en Canadá el 30 de septiembre de 2023
Makes breaking down panels a breeze and a thousand dollars cheaper than a decent gracksaw. The two ends connect well, one of the rails was a bit proud but I was able to adjust it. Light and easy to use.
J. Davidson
Comentado en Canadá el 26 de mayo de 2022
Product was delivered on time and is of nice quality. I would recommend this product!
Frédéric Dion
Comentado en Canadá el 5 de diciembre de 2021
Every single plywood in the picture was cut by the bora guide. Easy to use. good tool for big sheet and small sheet. Help me a lot because I was alone all the time so with the bora edge guide you don't need to be 2 peoples for cutting a 4x8 plywood. It's not a perfect tool but for the price you can't ask more. Thank you BORA. I use the edge 544100 with the BORA 544001 and 544002 clamp edge system with a dewalt circual saw DWE575 18,4 cm.
Productos recomendados
Mex $345.00
Mex $ 172 .00 Mex $172.00
Mex $381.24
Mex $ 171 .00 Mex $171.00