No hay artículos en el carro
No hay artículos en el carroVapor anillo de silicona para la clase de 800 programable Espresso machine
Sheila Suarez
Comentado en México el 4 de febrero de 2025
Es resistente y tal cual la foto
Victor Daniel Jurado Villavicencio
Comentado en México el 22 de julio de 2024
Recomendable
Tae
Comentado en los Estados Unidos el 8 de febrero de 2024
I love it!! It’s not squishy like it appears, but it’s great!
PATRICIA MARTINEZ.
Comentado en México el 2 de febrero de 2024
La recomiendo
Mag
Comentado en México el 15 de febrero de 2024
Es muy resistente y bonito
Mariel
Comentado en México el 17 de diciembre de 2024
Cada que la veo me emociono, el tamaño es como lo buscaba, como entre grandecito y medianito por si necesito sacar un poco, ya no me agüito jaja
Edith Vargas
Comentado en México el 21 de enero de 2024
Si buscas una alcancía de gran capacidad, esta no es la indicada, ya que es más pequeña de lo que se aprecia en su publicidad. Fuera de eso, se siente muy resistente, y es súper bonita y tierna.A la mejor es un poco cara por estas característica, pero, para quien guste de los cerditos cute, la amará.
Roy
Comentado en los Estados Unidos el 23 de septiembre de 2024
Like other reviews, my problem was the same — water steaming and shooting from the area where the handle/cup holding the ground coffee locks into the latte machine. Removed the gasket per YouTube instructions and found about a 1” crack in it causing all my problems. Installed this new gasket and problem completely solved.
Roy
Comentado en los Estados Unidos el 23 de septiembre de 2024
Like other reviews, my problem was the same — water steaming and shooting from the area where the handle/cup holding the ground coffee locks into the latte machine. Removed the gasket per YouTube instructions and found about a 1” crack in it causing all my problems. Installed this new gasket and problem completely solved.
Roy
Comentado en los Estados Unidos el 23 de septiembre de 2024
Like other reviews, my problem was the same — water steaming and shooting from the area where the handle/cup holding the ground coffee locks into the latte machine. Removed the gasket per YouTube instructions and found about a 1” crack in it causing all my problems. Installed this new gasket and problem completely solved.
Roy
Comentado en los Estados Unidos el 23 de septiembre de 2024
Like other reviews, my problem was the same — water steaming and shooting from the area where the handle/cup holding the ground coffee locks into the latte machine. Removed the gasket per YouTube instructions and found about a 1” crack in it causing all my problems. Installed this new gasket and problem completely solved.
Roy
Comentado en los Estados Unidos el 23 de septiembre de 2024
Like other reviews, my problem was the same — water steaming and shooting from the area where the handle/cup holding the ground coffee locks into the latte machine. Removed the gasket per YouTube instructions and found about a 1” crack in it causing all my problems. Installed this new gasket and problem completely solved.
Roy
Comentado en los Estados Unidos el 23 de septiembre de 2024
Like other reviews, my problem was the same — water steaming and shooting from the area where the handle/cup holding the ground coffee locks into the latte machine. Removed the gasket per YouTube instructions and found about a 1” crack in it causing all my problems. Installed this new gasket and problem completely solved.
Roy
Comentado en los Estados Unidos el 23 de septiembre de 2024
Like other reviews, my problem was the same — water steaming and shooting from the area where the handle/cup holding the ground coffee locks into the latte machine. Removed the gasket per YouTube instructions and found about a 1” crack in it causing all my problems. Installed this new gasket and problem completely solved.
Roy
Comentado en los Estados Unidos el 23 de septiembre de 2024
Like other reviews, my problem was the same — water steaming and shooting from the area where the handle/cup holding the ground coffee locks into the latte machine. Removed the gasket per YouTube instructions and found about a 1” crack in it causing all my problems. Installed this new gasket and problem completely solved.
Fam Jaguars
Comentado en México el 2 de julio de 2023
Es tal cual se ve, muy lindo, aunque su tamaño es pequeño.
Customer
Comentado en Canadá el 4 de mayo de 2023
No problems so far. Brewd at least 50 espressos. Even left the machine on for a while making it very hot. Let's see how long it'll hold.
Customer
Comentado en Canadá el 4 de mayo de 2023
No problems so far. Brewd at least 50 espressos. Even left the machine on for a while making it very hot. Let's see how long it'll hold.
Customer
Comentado en Canadá el 4 de mayo de 2023
No problems so far. Brewd at least 50 espressos. Even left the machine on for a while making it very hot. Let's see how long it'll hold.
Customer
Comentado en Canadá el 4 de mayo de 2023
No problems so far. Brewd at least 50 espressos. Even left the machine on for a while making it very hot. Let's see how long it'll hold.
Customer
Comentado en Canadá el 4 de mayo de 2023
No problems so far. Brewd at least 50 espressos. Even left the machine on for a while making it very hot. Let's see how long it'll hold.
Customer
Comentado en Canadá el 4 de mayo de 2023
No problems so far. Brewd at least 50 espressos. Even left the machine on for a while making it very hot. Let's see how long it'll hold.
Customer
Comentado en Canadá el 4 de mayo de 2023
No problems so far. Brewd at least 50 espressos. Even left the machine on for a while making it very hot. Let's see how long it'll hold.
Customer
Comentado en Canadá el 4 de mayo de 2023
No problems so far. Brewd at least 50 espressos. Even left the machine on for a while making it very hot. Let's see how long it'll hold.
Ollie
Comentado en los Estados Unidos el 6 de marzo de 2023
This pink piggy bank is made of high-quality plastic material that is durable and sturdy, ensuring that it can withstand any accidental drops or mishandling by kids. One of the best things about this piggy bank is its unbreakable construction, making it a reliable investment for parents who want to teach their kids the value of saving money. Aside from being a great money-saving tool, this piggy bank is also a cute decoration that can add a touch of whimsy to your child's room. It also makes for a great gift idea for birthdays, baby showers, or other special occasions.
Jennifer Douglas
Comentado en los Estados Unidos el 24 de marzo de 2023
I am in love with this piggy bank. Not only is it cute, it gives you the authentic piggy bank decor, without the breakable, heavy ceramic which I love those too, but this one is extremely sturdy and large and once full, it's going to be heavy enough with all of that coin, it's great that this one exists without the worry of it breaking. The money slot is nice and wide for bills too and the bottom plug fits snug and is easy to remove and replace. Often those plugs can be quite a pain, but this one works great. This would make a great gift for anyone, but especially for someone who collects pigs or just loves piggies in general. Any kid would love this one for sure but parents can love it because it's not breakable. I definitely recommend this one and I do hope you find this review helpful!
Miranda
Comentado en los Estados Unidos el 4 de septiembre de 2023
Cute piggy bank. Exactly as adorable.
Donna A.
Comentado en los Estados Unidos el 11 de abril de 2023
First, let me say that I am NOT a fan of pigs of any sort. I find them creepy. My three-year-old granddaughter wanted a piggy bank, so how could I refuse? When it arrived, I couldn’t believe how cute it actually was. It reminded me of the pig in the movie, “Sing.” I don’t watch television or even own one, but I did see that movie over at my youngest daughter’s house and watched it a second time over there.This is made of hard plastic with a plastic “stopper” on the bottom where you can retrieve the money. Somehow, the stopper doesn’t feel as secure as I think it should be, and it is easily removed by even a toddler.This bank is one of the cutest banks I have ever seen. I love that it is unbreakable (or it should be unless you have a little destructive beast… lol).It’s neither small nor large. I actually expected it to be much smaller, so I was pleasantly surprised when it arrived.My original plan was to put it in my granddaughter’s Easter basket, but it was too big, so I set it aside, and she was delighted to have “extra” on Easter!
MF
Comentado en Canadá el 13 de octubre de 2022
Got the ring (and a spare) after the original tore from years of daily use. I thought my machine was done; but this was super simple to change out and my machine is good as new! Here’s to another 5 years (at least as I bought 2 rings 😉)
MF
Comentado en Canadá el 13 de octubre de 2022
Got the ring (and a spare) after the original tore from years of daily use. I thought my machine was done; but this was super simple to change out and my machine is good as new! Here’s to another 5 years (at least as I bought 2 rings 😉)
MF
Comentado en Canadá el 13 de octubre de 2022
Got the ring (and a spare) after the original tore from years of daily use. I thought my machine was done; but this was super simple to change out and my machine is good as new! Here’s to another 5 years (at least as I bought 2 rings 😉)
MF
Comentado en Canadá el 13 de octubre de 2022
Got the ring (and a spare) after the original tore from years of daily use. I thought my machine was done; but this was super simple to change out and my machine is good as new! Here’s to another 5 years (at least as I bought 2 rings 😉)
MF
Comentado en Canadá el 13 de octubre de 2022
Got the ring (and a spare) after the original tore from years of daily use. I thought my machine was done; but this was super simple to change out and my machine is good as new! Here’s to another 5 years (at least as I bought 2 rings 😉)
MF
Comentado en Canadá el 13 de octubre de 2022
Got the ring (and a spare) after the original tore from years of daily use. I thought my machine was done; but this was super simple to change out and my machine is good as new! Here’s to another 5 years (at least as I bought 2 rings 😉)
MF
Comentado en Canadá el 13 de octubre de 2022
Got the ring (and a spare) after the original tore from years of daily use. I thought my machine was done; but this was super simple to change out and my machine is good as new! Here’s to another 5 years (at least as I bought 2 rings 😉)
MF
Comentado en Canadá el 13 de octubre de 2022
Got the ring (and a spare) after the original tore from years of daily use. I thought my machine was done; but this was super simple to change out and my machine is good as new! Here’s to another 5 years (at least as I bought 2 rings 😉)
Karld
Comentado en México el 12 de marzo de 2021
Le queda a la perfección, visiblemente es idéntica a la original, le doy tres estrellas porque el material con el que está echa es más suave, se deformó en dos semanas.
Karld
Comentado en México el 12 de marzo de 2021
Le queda a la perfección, visiblemente es idéntica a la original, le doy tres estrellas porque el material con el que está echa es más suave, se deformó en dos semanas.
Karld
Comentado en México el 12 de marzo de 2021
Le queda a la perfección, visiblemente es idéntica a la original, le doy tres estrellas porque el material con el que está echa es más suave, se deformó en dos semanas.
Karld
Comentado en México el 12 de marzo de 2021
Le queda a la perfección, visiblemente es idéntica a la original, le doy tres estrellas porque el material con el que está echa es más suave, se deformó en dos semanas.
Karld
Comentado en México el 12 de marzo de 2021
Le queda a la perfección, visiblemente es idéntica a la original, le doy tres estrellas porque el material con el que está echa es más suave, se deformó en dos semanas.
Karld
Comentado en México el 12 de marzo de 2021
Le queda a la perfección, visiblemente es idéntica a la original, le doy tres estrellas porque el material con el que está echa es más suave, se deformó en dos semanas.
Karld
Comentado en México el 12 de marzo de 2021
Le queda a la perfección, visiblemente es idéntica a la original, le doy tres estrellas porque el material con el que está echa es más suave, se deformó en dos semanas.
Karld
Comentado en México el 12 de marzo de 2021
Le queda a la perfección, visiblemente es idéntica a la original, le doy tres estrellas porque el material con el que está echa es más suave, se deformó en dos semanas.
Dan C Barros
Comentado en los Estados Unidos el 24 de noviembre de 2021
My Breville Roma is about 12 yrs old and was still on the original gasket. One day it finally let go and here I was with no espresso; not good, not good at all. Checked on Amazon and found the part with same day delivery available; crisis averted. Ordered in the morning and had the part at my door by mid afternoon. Took 5 min to replace. It splooged a little the first time I tried it but I think maybe the gasket had taken a set from where ever / how ever it was stored so the shape of the seat wasn't quite perfect. It's been perfect ever since and has not leaked. Strongly recommend this replacement seal.
Dan C Barros
Comentado en los Estados Unidos el 24 de noviembre de 2021
My Breville Roma is about 12 yrs old and was still on the original gasket. One day it finally let go and here I was with no espresso; not good, not good at all. Checked on Amazon and found the part with same day delivery available; crisis averted. Ordered in the morning and had the part at my door by mid afternoon. Took 5 min to replace. It splooged a little the first time I tried it but I think maybe the gasket had taken a set from where ever / how ever it was stored so the shape of the seat wasn't quite perfect. It's been perfect ever since and has not leaked. Strongly recommend this replacement seal.
Dan C Barros
Comentado en los Estados Unidos el 24 de noviembre de 2021
My Breville Roma is about 12 yrs old and was still on the original gasket. One day it finally let go and here I was with no espresso; not good, not good at all. Checked on Amazon and found the part with same day delivery available; crisis averted. Ordered in the morning and had the part at my door by mid afternoon. Took 5 min to replace. It splooged a little the first time I tried it but I think maybe the gasket had taken a set from where ever / how ever it was stored so the shape of the seat wasn't quite perfect. It's been perfect ever since and has not leaked. Strongly recommend this replacement seal.
Dan C Barros
Comentado en los Estados Unidos el 24 de noviembre de 2021
My Breville Roma is about 12 yrs old and was still on the original gasket. One day it finally let go and here I was with no espresso; not good, not good at all. Checked on Amazon and found the part with same day delivery available; crisis averted. Ordered in the morning and had the part at my door by mid afternoon. Took 5 min to replace. It splooged a little the first time I tried it but I think maybe the gasket had taken a set from where ever / how ever it was stored so the shape of the seat wasn't quite perfect. It's been perfect ever since and has not leaked. Strongly recommend this replacement seal.
Dan C Barros
Comentado en los Estados Unidos el 24 de noviembre de 2021
My Breville Roma is about 12 yrs old and was still on the original gasket. One day it finally let go and here I was with no espresso; not good, not good at all. Checked on Amazon and found the part with same day delivery available; crisis averted. Ordered in the morning and had the part at my door by mid afternoon. Took 5 min to replace. It splooged a little the first time I tried it but I think maybe the gasket had taken a set from where ever / how ever it was stored so the shape of the seat wasn't quite perfect. It's been perfect ever since and has not leaked. Strongly recommend this replacement seal.
Dan C Barros
Comentado en los Estados Unidos el 24 de noviembre de 2021
My Breville Roma is about 12 yrs old and was still on the original gasket. One day it finally let go and here I was with no espresso; not good, not good at all. Checked on Amazon and found the part with same day delivery available; crisis averted. Ordered in the morning and had the part at my door by mid afternoon. Took 5 min to replace. It splooged a little the first time I tried it but I think maybe the gasket had taken a set from where ever / how ever it was stored so the shape of the seat wasn't quite perfect. It's been perfect ever since and has not leaked. Strongly recommend this replacement seal.
Dan C Barros
Comentado en los Estados Unidos el 24 de noviembre de 2021
My Breville Roma is about 12 yrs old and was still on the original gasket. One day it finally let go and here I was with no espresso; not good, not good at all. Checked on Amazon and found the part with same day delivery available; crisis averted. Ordered in the morning and had the part at my door by mid afternoon. Took 5 min to replace. It splooged a little the first time I tried it but I think maybe the gasket had taken a set from where ever / how ever it was stored so the shape of the seat wasn't quite perfect. It's been perfect ever since and has not leaked. Strongly recommend this replacement seal.
Dan C Barros
Comentado en los Estados Unidos el 24 de noviembre de 2021
My Breville Roma is about 12 yrs old and was still on the original gasket. One day it finally let go and here I was with no espresso; not good, not good at all. Checked on Amazon and found the part with same day delivery available; crisis averted. Ordered in the morning and had the part at my door by mid afternoon. Took 5 min to replace. It splooged a little the first time I tried it but I think maybe the gasket had taken a set from where ever / how ever it was stored so the shape of the seat wasn't quite perfect. It's been perfect ever since and has not leaked. Strongly recommend this replacement seal.
reBOOT.PCTech Guy
Comentado en los Estados Unidos el 6 de abril de 2019
I was SO disappointed months ago; while trying to make espresso, as I do daily, and my Breville machine kept making worse and worse muddy espressos. Then one day it finally gave up and started spitting water out of the seal and burned my hand. It was VERY tricky to get up inside there, where that steam ring is, because there is only a short distance between the screw you have to remove, and the bottom of the drip tray. A screwdriver is often too long, when a long one is needed for torque, and the short screwdriver is difficult to use as the screw is really tight and one needs a long screwdriver.Well, I managed to get it out, saw the cracked/split rubber seal and thought darn! I ordered a new one. It finally arrived yesterday. I carefully inserted it; then inserted the round metal screen disc/filter, then screwed in that difficult screw.BUT IT STILL SQUIRTED all over! I was furious! UNTIL... I realized that the black housing which surrounds the area in which the coffee scoop, and the steam ring etc all go into, was LOSE!! I had to tighten it down, thereby making the space inside, ultimately, with less wiggle room. After doing THAT, I then stuck the handle in, and locked it into place and then tightness was PERFECT. NO MORE SPITTING!! Yay!And for the first time in almost 3 months, I enjoyed a freshly ground, very frothy espresso. BOY oh BOY was it ever good; especially after that whole undesirable, yet eventually rewarding adventure. Best "18 Amazon bucks" I've ever spent. THANK YOU BREVILLE!
reBOOT.PCTech Guy
Comentado en los Estados Unidos el 6 de abril de 2019
I was SO disappointed months ago; while trying to make espresso, as I do daily, and my Breville machine kept making worse and worse muddy espressos. Then one day it finally gave up and started spitting water out of the seal and burned my hand. It was VERY tricky to get up inside there, where that steam ring is, because there is only a short distance between the screw you have to remove, and the bottom of the drip tray. A screwdriver is often too long, when a long one is needed for torque, and the short screwdriver is difficult to use as the screw is really tight and one needs a long screwdriver.Well, I managed to get it out, saw the cracked/split rubber seal and thought darn! I ordered a new one. It finally arrived yesterday. I carefully inserted it; then inserted the round metal screen disc/filter, then screwed in that difficult screw.BUT IT STILL SQUIRTED all over! I was furious! UNTIL... I realized that the black housing which surrounds the area in which the coffee scoop, and the steam ring etc all go into, was LOSE!! I had to tighten it down, thereby making the space inside, ultimately, with less wiggle room. After doing THAT, I then stuck the handle in, and locked it into place and then tightness was PERFECT. NO MORE SPITTING!! Yay!And for the first time in almost 3 months, I enjoyed a freshly ground, very frothy espresso. BOY oh BOY was it ever good; especially after that whole undesirable, yet eventually rewarding adventure. Best "18 Amazon bucks" I've ever spent. THANK YOU BREVILLE!
reBOOT.PCTech Guy
Comentado en los Estados Unidos el 6 de abril de 2019
I was SO disappointed months ago; while trying to make espresso, as I do daily, and my Breville machine kept making worse and worse muddy espressos. Then one day it finally gave up and started spitting water out of the seal and burned my hand. It was VERY tricky to get up inside there, where that steam ring is, because there is only a short distance between the screw you have to remove, and the bottom of the drip tray. A screwdriver is often too long, when a long one is needed for torque, and the short screwdriver is difficult to use as the screw is really tight and one needs a long screwdriver.Well, I managed to get it out, saw the cracked/split rubber seal and thought darn! I ordered a new one. It finally arrived yesterday. I carefully inserted it; then inserted the round metal screen disc/filter, then screwed in that difficult screw.BUT IT STILL SQUIRTED all over! I was furious! UNTIL... I realized that the black housing which surrounds the area in which the coffee scoop, and the steam ring etc all go into, was LOSE!! I had to tighten it down, thereby making the space inside, ultimately, with less wiggle room. After doing THAT, I then stuck the handle in, and locked it into place and then tightness was PERFECT. NO MORE SPITTING!! Yay!And for the first time in almost 3 months, I enjoyed a freshly ground, very frothy espresso. BOY oh BOY was it ever good; especially after that whole undesirable, yet eventually rewarding adventure. Best "18 Amazon bucks" I've ever spent. THANK YOU BREVILLE!
reBOOT.PCTech Guy
Comentado en los Estados Unidos el 6 de abril de 2019
I was SO disappointed months ago; while trying to make espresso, as I do daily, and my Breville machine kept making worse and worse muddy espressos. Then one day it finally gave up and started spitting water out of the seal and burned my hand. It was VERY tricky to get up inside there, where that steam ring is, because there is only a short distance between the screw you have to remove, and the bottom of the drip tray. A screwdriver is often too long, when a long one is needed for torque, and the short screwdriver is difficult to use as the screw is really tight and one needs a long screwdriver.Well, I managed to get it out, saw the cracked/split rubber seal and thought darn! I ordered a new one. It finally arrived yesterday. I carefully inserted it; then inserted the round metal screen disc/filter, then screwed in that difficult screw.BUT IT STILL SQUIRTED all over! I was furious! UNTIL... I realized that the black housing which surrounds the area in which the coffee scoop, and the steam ring etc all go into, was LOSE!! I had to tighten it down, thereby making the space inside, ultimately, with less wiggle room. After doing THAT, I then stuck the handle in, and locked it into place and then tightness was PERFECT. NO MORE SPITTING!! Yay!And for the first time in almost 3 months, I enjoyed a freshly ground, very frothy espresso. BOY oh BOY was it ever good; especially after that whole undesirable, yet eventually rewarding adventure. Best "18 Amazon bucks" I've ever spent. THANK YOU BREVILLE!
reBOOT.PCTech Guy
Comentado en los Estados Unidos el 6 de abril de 2019
I was SO disappointed months ago; while trying to make espresso, as I do daily, and my Breville machine kept making worse and worse muddy espressos. Then one day it finally gave up and started spitting water out of the seal and burned my hand. It was VERY tricky to get up inside there, where that steam ring is, because there is only a short distance between the screw you have to remove, and the bottom of the drip tray. A screwdriver is often too long, when a long one is needed for torque, and the short screwdriver is difficult to use as the screw is really tight and one needs a long screwdriver.Well, I managed to get it out, saw the cracked/split rubber seal and thought darn! I ordered a new one. It finally arrived yesterday. I carefully inserted it; then inserted the round metal screen disc/filter, then screwed in that difficult screw.BUT IT STILL SQUIRTED all over! I was furious! UNTIL... I realized that the black housing which surrounds the area in which the coffee scoop, and the steam ring etc all go into, was LOSE!! I had to tighten it down, thereby making the space inside, ultimately, with less wiggle room. After doing THAT, I then stuck the handle in, and locked it into place and then tightness was PERFECT. NO MORE SPITTING!! Yay!And for the first time in almost 3 months, I enjoyed a freshly ground, very frothy espresso. BOY oh BOY was it ever good; especially after that whole undesirable, yet eventually rewarding adventure. Best "18 Amazon bucks" I've ever spent. THANK YOU BREVILLE!
reBOOT.PCTech Guy
Comentado en los Estados Unidos el 6 de abril de 2019
I was SO disappointed months ago; while trying to make espresso, as I do daily, and my Breville machine kept making worse and worse muddy espressos. Then one day it finally gave up and started spitting water out of the seal and burned my hand. It was VERY tricky to get up inside there, where that steam ring is, because there is only a short distance between the screw you have to remove, and the bottom of the drip tray. A screwdriver is often too long, when a long one is needed for torque, and the short screwdriver is difficult to use as the screw is really tight and one needs a long screwdriver.Well, I managed to get it out, saw the cracked/split rubber seal and thought darn! I ordered a new one. It finally arrived yesterday. I carefully inserted it; then inserted the round metal screen disc/filter, then screwed in that difficult screw.BUT IT STILL SQUIRTED all over! I was furious! UNTIL... I realized that the black housing which surrounds the area in which the coffee scoop, and the steam ring etc all go into, was LOSE!! I had to tighten it down, thereby making the space inside, ultimately, with less wiggle room. After doing THAT, I then stuck the handle in, and locked it into place and then tightness was PERFECT. NO MORE SPITTING!! Yay!And for the first time in almost 3 months, I enjoyed a freshly ground, very frothy espresso. BOY oh BOY was it ever good; especially after that whole undesirable, yet eventually rewarding adventure. Best "18 Amazon bucks" I've ever spent. THANK YOU BREVILLE!
reBOOT.PCTech Guy
Comentado en los Estados Unidos el 6 de abril de 2019
I was SO disappointed months ago; while trying to make espresso, as I do daily, and my Breville machine kept making worse and worse muddy espressos. Then one day it finally gave up and started spitting water out of the seal and burned my hand. It was VERY tricky to get up inside there, where that steam ring is, because there is only a short distance between the screw you have to remove, and the bottom of the drip tray. A screwdriver is often too long, when a long one is needed for torque, and the short screwdriver is difficult to use as the screw is really tight and one needs a long screwdriver.Well, I managed to get it out, saw the cracked/split rubber seal and thought darn! I ordered a new one. It finally arrived yesterday. I carefully inserted it; then inserted the round metal screen disc/filter, then screwed in that difficult screw.BUT IT STILL SQUIRTED all over! I was furious! UNTIL... I realized that the black housing which surrounds the area in which the coffee scoop, and the steam ring etc all go into, was LOSE!! I had to tighten it down, thereby making the space inside, ultimately, with less wiggle room. After doing THAT, I then stuck the handle in, and locked it into place and then tightness was PERFECT. NO MORE SPITTING!! Yay!And for the first time in almost 3 months, I enjoyed a freshly ground, very frothy espresso. BOY oh BOY was it ever good; especially after that whole undesirable, yet eventually rewarding adventure. Best "18 Amazon bucks" I've ever spent. THANK YOU BREVILLE!
reBOOT.PCTech Guy
Comentado en los Estados Unidos el 6 de abril de 2019
I was SO disappointed months ago; while trying to make espresso, as I do daily, and my Breville machine kept making worse and worse muddy espressos. Then one day it finally gave up and started spitting water out of the seal and burned my hand. It was VERY tricky to get up inside there, where that steam ring is, because there is only a short distance between the screw you have to remove, and the bottom of the drip tray. A screwdriver is often too long, when a long one is needed for torque, and the short screwdriver is difficult to use as the screw is really tight and one needs a long screwdriver.Well, I managed to get it out, saw the cracked/split rubber seal and thought darn! I ordered a new one. It finally arrived yesterday. I carefully inserted it; then inserted the round metal screen disc/filter, then screwed in that difficult screw.BUT IT STILL SQUIRTED all over! I was furious! UNTIL... I realized that the black housing which surrounds the area in which the coffee scoop, and the steam ring etc all go into, was LOSE!! I had to tighten it down, thereby making the space inside, ultimately, with less wiggle room. After doing THAT, I then stuck the handle in, and locked it into place and then tightness was PERFECT. NO MORE SPITTING!! Yay!And for the first time in almost 3 months, I enjoyed a freshly ground, very frothy espresso. BOY oh BOY was it ever good; especially after that whole undesirable, yet eventually rewarding adventure. Best "18 Amazon bucks" I've ever spent. THANK YOU BREVILLE!
Productos recomendados
Mex $241.99
Mex $ 140 .00 Mex $140.00
Mex $313.53
Mex $ 156 .00 Mex $156.00
Mex $199.00
Mex $ 117 .00 Mex $117.00
Mex $385.33
Mex $ 192 .00 Mex $192.00