Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

BTF-LIGHTING FCOB COB Kit de conectores de 8 mm 0.3 pulgadas, 14 conectores transparentes, 5 cables de extensión de 15 cm de largo, 20 AWG, para sin cables, sin soldadura, FCOB 2 pines v+ v, conexión

Envío gratis en pedidos superiores a Mex $600.00

Mex $430.18

Mex $ 223 .00 Mex $223.00

En stock

1.Tamaño:Azul Marino (navy Corduroy)


Acerca de este artículo

  • Contenido del paquete: 14 conectores transparentes, 5 cables de extensión de 20 AWG de 15 cm de largo. Tira de LED a tira LED, tira de LED a cables de 2 pines, cables de 2 pines a cables de 2 pines. Varias funciones se pueden cambiar y utilizar a voluntad. Las pestañas de metal de clips no necesitan contactar directamente con almohadillas para orejas de cobre de FCOB.
  • Múltiples usos: amplía tu tira de luz FCOB de 8 mm de ancho, empalme de tira LED FCOB, conexión de esquina, conecta la fuente de alimentación directamente. Las pestañas de metal de clips no necesitan contactar directamente con tiras LED FCOB.
  • Características: gran cantidad de 14 conectores. Transparente, no bloquea la tira de luz LED, conexión sin costuras. Fijación firme. Funcionamiento simple. No requiere estaño. Diseño de perfil fino y bajo. Alta calidad. Rendimiento de alto costo.
  • Luces y cables compatibles: solo compatible con tiras de luces LED FCOB COB de 8 mm de ancho. ¡Atención! Solo este cable de 2 pines (ASIN: B0C81JS5FP) es compatible con el conector FCOB de 2 pines de 8 mm de ancho.
  • Puntos de atención: el conector es desechable y debe romperse antes de que se pueda sacar la tira LED
  • La tira LED FCOB puede funcionar perfectamente aunque los contactos de acoplamiento de clips no hacen contacto con rastros de cobre



Billy J.
Comentado en los Estados Unidos el 15 de febrero de 2025
I use this on my version of Disneyland layout within the Fort. I cut the light to the length I needed without any diminishing of the light. Unlike a lot of other lights, I appreciate that I can set the light intensity to my desired output and it remembers that setting for the next time I operate the layout. The adhesive backing is perfect and holds tight on my train board's painted surface. The light strip does not take up much space where needed. I may have to buy two more for other placements since those do not have the memory setting.
Rufuss
Comentado en Canadá el 22 de febrero de 2024
This item was ordered to install under cabinet lighting in our kitchen. Since these lighting strips cannot be installed around 90 degree corners, I ordered a pack of metal clips and extension wires to accomplish this. Unfortunately I ordered a size that was not compatible with my lighting unit (10 mm rather than 8 mm) and had to reorder the right size. I also ordered a roll of wire since the wires included with the previous pack were too short to incorporate a 30 inch gap I had to include in my lighting system. When attempting to install this system I found after a number of tries, I was unable to accomplish a functional connection from the light strip to the wiring. It would connect but would not function. After modifying my cupboards slightly I was able to install a portion of the system but could not install through the gap in the system I needed. I therefore have only about half the system installed and functioning. I will have to order another lighting unit to complete my project. My comments therefore are as follows: 1. the web site is not user friendly enough to ensure that when accessories are order for the main lighting unit to ensure they are compatible 2. The hardware to connect from light strip to wire although being a simple procedure, DOES NOT WORK. Other than that, I was impressed with the quality of this item and the appearance of the portion of the lighting I was able to install. For this reason, and in the interest of uniformity, I will order a shorter unit to complete the installation and incorporate the leftover lighting strip from the first unit. The connection hardware did work well when connecting light strip to light strip.
JT
Comentado en los Estados Unidos el 20 de febrero de 2024
I used the 8mm, 2-connector version to connect COB LED strips from Home Depot. The original Home Depot kit came with a power supply, a lot of wire, including a Y-connector, but by itself was not adequate for a fairly small under-cabinet lighting project, because it didn't provide a way to make connections over short spaces. One issue I had was that I needed to put some of the lights on the bottom of an under-cabinet radio (remember those?), and with the original kit alone it was impossible to do that neatly.With these connectors I was able to cut the original strips *and* the wiring, and make new connections anywhere I needed them. I was even able to cut the pins off the end of the COB strips and insert the short stub with the pins into one of these connectors to make a new male or female pin connector on the end of a wire. The original 20 AWG wire also fitted into the connector, so I didn't need to use the wire that came with the kit - I have that for a future project.I had no problems making the connections - I used needle-nose pliers, so had to come in at an angle, but it probably would have been fine if I'd used a smallish pair of regular flat-end pliers. Every connection worked first time, and I had no damage.It took me a while to figure out which of the many kits available on Amazon was the right one for my project, but I'm very happy with this choice.
A K
Comentado en Canadá el 28 de diciembre de 2024
The wire connectors worked great. Would be nice if the wires were twice as long.
Ray
Comentado en los Estados Unidos el 27 de diciembre de 2024
These strip LED connecting blocks were very useful in creating the lighting scheme in my coach RV they were easy to use and a good value for the money.
Productos recomendados

Mex $191.23

Mex $ 101 .00 Mex $101.00

4.6
Elegir