No hay artículos en el carro
No hay artículos en el carroMás información del producto
No adivine el contenido de humedad – sabe antes de construir
Comprobar la humedad en los materiales de construcción
Este práctico medidor de humedad es ideal para medir la humedad en el material de construcción. Puede usarlo para probar el contenido de humedad en ladrillo, paneles de yeso y yeso. También funciona bien en todo tipo de madera, incluyendo leña y madera. El rango de medición del XT es del 5% al 50% para la madera y del 1,5% al 33% para otros materiales de construcción y tiene una precisión de +/- 3%.
Fácil de leer
El medidor de humedad encaja perfectamente en tu mano y cuenta con una gran pantalla LCD. Es fácil de leer incluso con luz brillante gracias a su pantalla retroiluminada a tiempo completo. Cuando está probando en lugares de difícil acceso, el medidor tiene un interruptor de retención que bloquea la lectura LCD hasta que pueda leerla. Además, ofrece una alerta audible para cuando no se puede ver la pantalla. Se apaga automáticamente en 3 minutos para prolongar la duración de la batería.
Todo lo que necesitas
El medidor de humedad viene con una tapa protectora, batería de 9 V y guía del usuario
Mrs A Harrison
Comentado en el Reino Unido el 24 de agosto de 2024
Very pleased with the product would recommend.
Judy
Comentado en Canadá el 21 de julio de 2024
Detects moisture in walls, floors, baseboards etc.
Eduardo sanchez
Comentado en México el 29 de diciembre de 2024
Lo recibí el 28 de diciembre y parece que me esta jugando bromas del día de los inocentes, proble con madera y una pared de ladrillos me da mediciones de 100% en todas las paredes, y medidas muy variadas en la madera qué no pueden ser correctas. Pésimo producto
BSB
Comentado en los Estados Unidos el 16 de diciembre de 2020
So far this meter is working fine. I mainly use it to check firewood that I am seasoning and it has held up to the task. It also comes in handy to check floor joists if you have a basement or crawl space. We recently had some mold remediation work done in our crawl and I can monitor the results from time to time. The only thing I can think of that can be improved is the addition of some type of backlight feature for low light use. The carrying case and extra prongs are a nice touch. It is important to keep I mind that this is only a guide tool. It only measures the moisture in a small area near the probes. It is important to check multiple areas to get an idea of the overall moisture content. Firewood mostly dries out at the ends from the inside out. It is possible to get a reading of less than 20% at the ends and a dry day but additional moisture can be trapped inside the log. It is important to take multiple readings on different days to establish an baseline.
Customer
Comentado en Canadá el 25 de febrero de 2019
Easy to use, visual display.
TreeFarmer
Comentado en los Estados Unidos el 22 de enero de 2018
This is my first moisture meter, so I have nothing to compare it to, but I'm very pleased with it. I use it for checking my firewood to see if it's ready to burn. It seems very well built. You have to push with a little force to get the prongs to go into the wood and I was a bit worried that those little pins might be fragile, but they are not. They are sturdy and the case seems to be up to the task as well.I've played around with it a bit - testing a piece of wood and then leaving it in the house for a while and everytime I test it again, the moisture level has gone down just as you would think it should. I like the fact that it will shut itself off if I forget to do it. One little surprise feature is the beeping that indicates moisture level. If the level is really low, the beeping is slow. Then as you go up in moisture, it beeps faster. The cutoff for burnable firewood is 20% and if the unit measures over 20% is beeps quite fast, sort of like It's saying, "This wood is not ready!".I should also mention that the readings I get are consistent with what I see when I burn the wood. If I measure a piece at say 18%, it lights right up and burns with no steaming or hissing. If I measure one at 22%, then there will be some of the steaming and hissing after I put it on the fire.It comes with a 9v battery and I was pleased to see that it was an alkaline battery, which should last for quite a while. It seems like most things that come with batteries come with the cheapest ones possible - this was a pleasant surprise.December, 2024I stumbled on this review that I'd done back in 2017 when I first bought the meter. (I just recommended this product to a friend and looked up my order). I can report that it is still working after about 7 years of use! I replaced the battery one time so far. I heat with wood and cut 4 or 5 cords a year - I have used this meter 100's of times since I got it and it's still going strong.
Productos recomendados
Mex $1,800.00
Mex $ 792 .00 Mex $792.00
Mex $15,658.51
Mex $ 1,881 .00 Mex $1,881.00
Mex $12,839.90
Mex $ 1,881 .00 Mex $1,881.00