Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Cartuchos de tóner compatibles con HP CF400A Color Laserjet Pro M252n MFP M277dw M252dw M277n M274n para impresora láser HP con combinación de chips

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,458.00

Mex $ 641 .00 Mex $641.00

En stock

1.Tamaño:2pack-black-1.5ft


Acerca de este artículo

  • Modelos aplicables: para impresora HP Color LaserJet Pro M252n MFP M277dw M252dw M277n M274n.
  • [Páginas de cartucho de tóner] Negro 1500 páginas; Color 1400 páginas (a 5% de cobertura en carta/A4).
  • [Aspectos destacados] Nuestros cartuchos de tóner pueden proporcionar alta calidad y ahorrar mucho dinero que la marca original. Produce impresiones de alta resolución con gráficos mejorados y detalles claros.
  • [Servicio] Somos un proveedor profesional de servicio de cartuchos de tóner que proporciona colores profesionales precisos y colores vivos, obteniendo un rendimiento fiable e imágenes impresionantes cada vez que imprimes.
  • [Posventa] Si tienes cualquier pregunta durante el uso, no dudes en ponerte en contacto con nosotros.


▲ Adecuado para modelos de impresora:
Para impresora HP Color LaserJet Pro M252n
Para HP Color LaserJet Pro M277dw impresora
Para HP Color LaserJet Pro M252dw impresora
Para impresora HP Color LaserJet Pro M277n
Para impresora HP Color LaserJet Pro M274n
Si desea otros modelos, no dude en ponerse en contacto con nosotros, estamos encantados de servirle
Rendimiento de página: 1500 páginas en color negro, 1400 páginas (5% de cobertura en carta/A4).
Color del cartucho de tóner: negro, magenta, amarillo, azul.
Le sugerimos que compre una combinación de cuatro colores, le dará 8% de descuento.
▲ Cómo usar
Paso 1: Agitar el cartucho de tóner 5-6 veces antes de usar
Paso 2: Extraiga el sello horizontalmente (la longitud del sello es aproximadamente el doble de la longitud del cartucho de tóner) y retire la cubierta protectora
Paso 3: Cargue el cartucho de tóner en la impresora de la manera correcta
▲ Recordatorio:
1. Instale un nuevo cartucho de tóner o añada Antes del tóner Agite el cartucho de tóner varias veces y, a continuación, imprima una o dos páginas de prueba para comprobar si la impresión
es normal y si el cartucho de tóner es bueno. A continuación, instale el cartucho de tóner o agregue el tóner.
2. Los tóneres de diferentes fabricantes no deben mezclarse demasiado. - El tóner dentro del cartucho de tóner/tóner debe ser limpiado. Solamente
puede instalar un nuevo cartucho de tóner o agregar tóner. Habrá problemas como bordes grises o negros.


Cy "kkm" K'Nelson
Comentado en los Estados Unidos el 28 de marzo de 2025
I needed flexible Cat6+ cables to route my comms closet. It's no biggie to patch a panel-to-panel with a 6ft cable. It becomes a hassle, though, when you patch together a few stacked small UniFi switches with 1ft or 1.5ft thick cables: the cables are inflexible, and even if pre-bent, they try to scatter your stack over the shelf. So I started shopping for thin and flexible cables, chose these, and never looked back.Yes, they are Cat8, and are expensive if you use them as Cat6+, but I'm fine overpaying a buck or two for their flexibility and convenience. And yes, any Cat-higher cable will work where the Cat-lower is required. I saw a few pieces of advice not to use Cat8 cables with Cat6 devices, but this is… ehm, BackSpace and whiteout. Not true.
Richard O.
Comentado en los Estados Unidos el 17 de diciembre de 2024
I do a lot of live streaming and my setup always has a WiFi router on my desk that’s plugged in, normal lan cables are so tough, they don’t bend, they just clunky and thick.These are so nimble and thin, I’ve wired them in with some of my other cables and they are fantastic! Thin, light and flexible. Why can’t all lan cables be like this?
Customer
Comentado en los Estados Unidos el 26 de septiembre de 2024
I needed a short Network patch cable that had better flexibility the the normal CAT5/6 cables. These did the job and look nice too.
Gale Smith
Comentado en los Estados Unidos el 29 de agosto de 2023
These work great as replacement microphone cords for the Xiegu X6100, and the G90. My only wish is they were 6 inches longer. They reduce weight, and the space taken up by the stock microphone cable when going portable, and are not in the way when storing the microphone on the shack desk. Would buy again.
Productos recomendados

Mex $355.63

Mex $ 188 .00 Mex $188.00

4.5
Elegir