No hay artículos en el carro
No hay artículos en el carroTu Funda de transporte NexStar está diseñada para transportar de forma segura tu telescopio NexStar 4/5/6/7 así como cualquier tubo [optico Celestron 8" SCT/EdgeHD.
LUIS SILVA
Comentado en México el 13 de julio de 2024
Perfecto para telescopios Nextar 4, 5, y 6 se
Omar Barrera
Comentado en México el 29 de septiembre de 2022
Mi NexStar SE 8. queda ams que perfecto en este estuche, extremadamente fijo, y la cantidad de accesorios que caben en el son bastantes, lo recomiendo ampliamente para cualquier poseedor de un NexStar 8 SE y que tenga muchos accesorios
Salvador Rodríguez Zaragoza
Comentado en México el 16 de julio de 2020
El estuche es muy bonito y tiene una buena construcción rígida externa y el empaque interior asegura que el telescopio quede bien sujeto. El espacio para las partes pequeñas también ofrece la seguridad para resguardarlos con seguridad y sin que se maltrate el tubo del telescopio
Sam's Mom
Comentado en Canadá el 17 de diciembre de 2020
I am so happy that I made this purchase. I had a hard time with the high cost but I was so excited when it arrived. It will not only hold the optical tube but all of the accessories, with the exception of the tripod. It is sturdy but be aware that it takes up a lot of real estate! It's huge! If you don't plan to take the scope anywhere then I would say don't get it. I wouldn't pay this amount just for a storage bag but since I plan to transport, it's a must in my mind. It will keep my investment safe so to me, that's worth it.
Karl K
Comentado en Canadá el 15 de octubre de 2020
This case fits my 11" Celestron SCT perfectly
Antonio Nateras
Comentado en México el 2 de octubre de 2019
Cabe perfecto el nexStar 6 SE
Jerome Massot
Comentado en Francia el 5 de agosto de 2015
Rempli son office mais attention ne permet que de transporter un tube de 9" se, pas de place pour trepier ou accessoires.
Ish
Comentado en los Estados Unidos el 23 de agosto de 2015
This is a great case. Much better than using the box my Nexstar 6se was shipped in. For a while I tried using a rubbermaid bin and reusing the foam packaging, but it was not that convenient to carry around. You couldn't carry it one handed.One side holds your scope. For the 6se you wont need the two foam spacer inserts. To get the 6se to fit, you need to stretch the case foam a bit to clear the visual back and focuser. At first I was concerned about the pressure of such a snug fit, but the foam does give a bit so it is fine. Be aware that the 4/5/6se will fit with the mount attached, but for the 8se you will need to remove the mount. Only the 8se optical tube will fit. The picture on the insert of the case (check out the pictures on the celestron site to see what I mean) shows the OTA placed with the hand control on the right and the bolt that attaches the tube to the fork arm pointing up, however I had to insert it reversed (mirrored) for that to work. In other words, when I place the OTA in the case I have the hand control on the left so the fork arm knob points up. If I placed it as the pamphlet showed, the knob would be pointing down and I think that would prevent it from laying truly flat. I had to remove the finderscope, not to mention the diagonal. The 4/5se might allow room to have them attached, but I wouldn't bet on it. It also has a nice seat belt buckle to secure it.The other side has a slightly rigid zippered flap the size of the entire side. It is recessed so as to have enough clearance when the case is closed. Unzipping the flap and lifting it up reveals it has a full length pocket on the other side. You could possibly fit notes and small starcharts within it. I place my eyepiece tray in it even though part of it sticks out. No worries since when the flap is zipped everything inside is separated from the OTA.Underneath where the flap lays, there are two velcro closed pouches. Inside one pouch there are three separated spaces. The other pouch has four. In one pouch, I could easily fit the finderscope, the diagonal, and AC power cord. The other pouch will accommodate eyepieces, filters and other odds and ends.The pouches themselves feel slightly padded as well.The handles include a velcro wrap to make sure the straps stay together. The outer shell is a bit rigid, but I would not go about dropping or banging it around. Don't expect to step on it and not crunch something inside. It is a vessel to store your OTA and accessories elegantly and convenient to carry around one handed. While the case itself looks like it would withstand normal wear and tear, I wouldn't want to cause any damage to it that would affect the contents inside.Do yourself a favor and get this case. While it is hard to justify the cost of this as opposed to a DIY solution. This is designed for your scope and it is worth it in my opinion.
P. M. Mitchell
Comentado en el Reino Unido el 24 de abril de 2015
I bought this for my wife's NexStar evolution 8in, the case is a perfect fit with thick (approx 30mm) padding all round and a strap for additional security, the lid has an inner zipped compartment with pockets for eyepieces etc and with wheels it makes moving what is a heavy telescope a lot easier. It's not cheap but when you consider the value of the telescope it protects it's worth it.
Productos recomendados
Mex $1,425.47
Mex $ 698 .00 Mex $698.00
Mex $4,938.47
Mex $ 1,881 .00 Mex $1,881.00
Mex $372.43
Mex $ 201 .00 Mex $201.00
Mex $834.79
Mex $ 392 .00 Mex $392.00