No hay artículos en el carro
No hay artículos en el carroThe Guy with the Dogs
Comentado en los Estados Unidos el 23 de marzo de 2025
Very Pretty! They're 304 SST, and they're actually Eye-Nuts, with SST studs screwed into them, so You can change the length or fit simply by buying SST bolts.You probably want to use loctite/sealant whether you change the fitting out or not, just to seal out moisture if not for safety. (All "stainless" steels are subject to corrosion if there's sealed-in moisture with no access to oxygen. It prevents them from forming their micro-thin protective oxide skin, and threads in the same situation are subject to increased stress-cracking as well.)
Tom & Emily
Comentado en los Estados Unidos el 23 de febrero de 2025
These eyebolts work great. My particular use case is rather unique however I would think these would be ideal for several types of projects. They are very well-made and durable. Nice and strong with a good finish.
UJM81
Comentado en los Estados Unidos el 11 de enero de 2025
Pulling the passenger side head from a Gen 3 Hemi Durango is a huge pain. I got an idea and used 4 of these with 3D printed half-round spacers under them to screw in to the M8 rocker arm bolt holes on each end. Thread length was perfect. I used some carabiners and two short chains and was able to lift the head without any damage.The first time I tried this without the eye bolts and chains I scraped the bottom of the head, ruining it. Unlike the driver side, you can't pull the head off directly, there is a huge wiring harness right over top of it. I used a tire iron to pull it clear once I had the head up.
Productos recomendados
Mex $390.24
Mex $ 183 .00 Mex $183.00
Mex $379.99
Mex $ 174 .00 Mex $174.00
Mex $397.68
Mex $ 214 .00 Mex $214.00
Mex $412.46
Mex $ 206 .00 Mex $206.00
Mex $328.99
Mex $ 161 .00 Mex $161.00