No hay artículos en el carro
No hay artículos en el carroDescripción del producto
El kit de cables de prueba puede ayudar a proporcionar resultados de prueba seguros y precisos en mediciones de energía eléctrica.
La funda de cable utiliza material especial, es flexible
Longitud del cable: 60 – 70 cm. Material de los clips Kelvin: cobre, chapado en oro.
con 4 cables BNC para medidor LCR como HP , Agilent, Anritsu, etc.
Función de 4 puertos de cable BNC para pruebas de componentes. Fácil de usar para pruebas y medición de componentes a bordo
Ampliamente utilizado: Ampliamente utilizado en laboratorio, pruebas eléctricas, como experimentos, placas de circuitos, prototipos, solución de problemas, etc. Se puede utilizar en laboratorios, tiendas, escuelas, hogares e industrias.
DFilbert
Comentado en los Estados Unidos el 29 de noviembre de 2024
They are very well built for the price and work well for a hobbyist application of 4 wire milliohm meters.
Patchy Fog
Comentado en los Estados Unidos el 26 de enero de 2024
The clips are a good size with a micro, serrated, gold-plated nose that grips well. Each clip has 2x 75 ohm mini coax leads (shield and conductor) -- one for each half of the jaws. I cut off the BNCs (as one does) and wired them into a TL-21 4-wire Kelvin adapter for my DE-5000 LCR meter. Used almost the whole length and the leads calibrated without a problem. The 2 leads from each clip are held together at intervals with shrink tubing which is a nice touch. Very satisfied.
metrology dufus
Comentado en los Estados Unidos el 7 de noviembre de 2022
As a diagnostic and quality evaluation, I needed to measure coil resistance in drone motors.The only way to do this is, at minimum equipment, use of a 6-1/2 digit ohmmeter operating as a 4-wire probe device. External to that device must be an exotic technology to interconnect and repeatedly read values well below 1 ohm.Thus the 'Kelvin' leads.I could have fabricated a set but ran across these at unheard of price and 3-day delivery [prime].The only thing I was worried about then was the alligator clip jaws and banana plug metal materials (the interconnecting surfaces). I was pleased to see they are gold-plated, albeit probably nano-thin electroplate.Better than brass or zinc (Tellurium copper would be best).These are nowhere near Fluke or Agilent, but gold plating is adequate even though it does not eliminate error contribution to the measurements and affords some level of immunity to oxidation.Anyway, I was able to null (zero) the measurement errors inherent in these probes and get readings of 0.02 ohms with a reasonable measurement uncertainty (about 0.004 Ohm).
North-of-49
Comentado en Canadá el 3 de septiembre de 2022
Works great with my DE-5000 LCR meter.
Learner 123
Comentado en Canadá el 6 de septiembre de 2021
Product is as advertised
Productos recomendados
Mex $287.11
Mex $ 134 .00 Mex $134.00
Mex $297.00
Mex $ 148 .00 Mex $148.00