No hay artículos en el carro
No hay artículos en el carroLa coladera filtro es una pieza fundamental para mantener la eficiencia y el buen funcionamiento de las motobombas de 1 pulgada, ya que actúa como un protector contra partículas y residuos que puedan obstruir la manguera o dañar el sistema de bombeo. Este conjunto de 2 piezas está diseñado específicamente para ofrecer una filtración eficiente y duradera. - **Compatibilidad**: Estas coladeras son compatibles con mangueras de motobombas de 1 pulgada, asegurando un ajuste perfecto para garantizar un flujo de agua sin obstrucciones. - **Material de alta calidad**: Fabricadas con materiales resistentes y duraderos, estas coladeras soportan condiciones exigentes, como el contacto con agua y partículas, sin perder su efectividad. - **Protección contra residuos**: Ayudan a prevenir la entrada de suciedad, arena y otros contaminantes que pueden dañar el sistema interno de la motobomba, extendiendo su vida útil y mejorando su rendimiento. - **Fácil instalación y mantenimiento**: Las coladeras filtro son fáciles de instalar y reemplazar, lo que permite un mantenimiento rápido y sencillo de la motobomba. - **Eficiencia mejorada**: Al filtrar eficientemente el agua antes de que entre al sistema de la motobomba, estas coladeras ayudan a asegurar que el motor funcione de manera más eficiente y libre de obstrucciones. Este conjunto de 2 coladeras filtro es esencial para mantener tu motobomba de 1 pulgada operando en condiciones óptimas, asegurando un flujo continuo de agua sin interrupciones y prolongando la vida útil del equipo.
Chris
Comentado en los Estados Unidos el 10 de junio de 2024
Got these so I could connect a solar panel to my LiFePo battery, these fit perfectly with my small battery. They are quite snug so I'm not worried about accidental disconnects with these. Installation was easy and they crimped well to my 12-gauge electrical wire.No complaints so far, they look as good as new on my battery and I've not had any issues so far.
Cash
Comentado en los Estados Unidos el 30 de mayo de 2024
I chose the 12-14 g size in checkout and instead recieved the larger size (yellow) connectors.While they were still useable in my case, that may cause a hiccup for someone neding gauge specific sizes.That being said, the quality of the connectors is on par with what I have come to expect from generif connectors.I appreciate the ability to open the connector cover up; allowing you to pass the wire through the bottom of the plastic housing and then crimp the wire to the terminal and pull it back into the housing for securing and a cleaner look.So far I have used these on multiple speakers and various power/audio connections in on of mny vehicles and have not experienced any issues in any capacity.Again, triple check the correct size you need when ordering and keep in mind you may need to correct a mistaken size.
Xander
Comentado en los Estados Unidos el 28 de mayo de 2024
I actually used to work in a factory that makes these exact connectors. These appear to be the same top quality ones I made.It takes a lot to make these, so the price of ~$10 is a great deal.Interestingly, the color doesn't denote a positive or negative connection, but rather the size of the wire they fit.
D. Ashley Cohen, Ph.D.
Comentado en los Estados Unidos el 24 de mayo de 2024
Flag terminals sometimes make the impossible, possible. Their right angle bend is often exactly what you need to fit into enclosures of little depth. Definitely require a crimper with jaws specifically intended for flag terminals. My only complaint with these is the same as I have with all flag terminal, that the wire entry tunnel is too short for heat shrink to overlap enough to develop a strong grip. Add 3/16 of an inch and truly waterproof junctions can be achieve. Nonetheless, this one has all the basics correct and I wouldn't hesitate obtaining again.
GShultz
Comentado en los Estados Unidos el 17 de mayo de 2024
110 PCS Flag Spade Terminals Female - Blue 16-14 AWG - Nylon Quick Disconnect TerminalsI'm installing a fuse box on a EzGo golf cart in the dash compartment, and the box has a cover with slots to run the wires out from the sides or down through the bottom.With limited space, I preferred to be able to run the wires down through the bottom so they didn't “fan-out” and take up too much space.I originally thought I could just bend the standard terminal connections down, but they still protruded too far out with the wires and the cover wouldn't snap back on.When I saw these, I figured they might work, so I ordered them to give them a try.They worked perfectly!Nice, low-profile installation and running 6 wires, have plenty of clearance to route the wires down the sides and out of the bottom of the fuse box without issue.Makes for a very professional-looking and clean wiring job that's less likely to become disconnected with the cover securely in place and with a firm locking connection provided by these terminals.They crimp easy and hold the wires secure.The design of these 90 degree connectors would be preferable in a myriad of applications rather than having the wire terminal coming straight out the way that standard terminals work, and I am really glad that I found them.Turns a “rat's nest” of wires into a clean-looking job.Excellent value and available in different wire gauges (which I am going to stock up on) and come in a screw-top storage jar rather than the standard box or bag.Shipped and received fast.5- Stars!
Productos recomendados
Mex $413.51
Mex $ 206 .00 Mex $206.00
Mex $214.00
Mex $ 124 .00 Mex $124.00
Mex $1,244.62
Mex $ 597 .00 Mex $597.00
Mex $346.00
Mex $ 176 .00 Mex $176.00
Mex $855.07
Mex $ 444 .00 Mex $444.00