La verdad estoy muy contento con la compra.En mi caso, le cambié los ventiladores que traía por unos de mejor desempeño (CoolerMaster Mobius) ya que en su momento no encontré otro enfriador con las características que buscaba para mis gustos, pero no le veo problema el dejarle los de fábrica los cuales se desempeñan bien.El efecto de espejo está súper genial.Llevo 7 meses usándolo y va bastante bien.

 

Es muy bueno el disipador, mantiene a buena temperatura el procesador, Ryzen 7 5800X. Jugando y a 40° ambiente lo mantiene en 61° aprox y no hace tanto ruido, hace más ruido la RTX 2070 :/ muy recomendado, pero eso sí, midan muy bien su gabinete, yo tuve que agujerear para que entrara, una de 240mm hubiera quedado muy bien, pero bueno, ahi está.

Buena calidad en los materiales, su instalación no es tan fácil pero no es complicada, tiene todos los accesorios para zócalos de Intel y AMD, no hace ruido y mantiene al procesador fresco, fresco.

Produto de qualidade. Ótima construção. Ainda tenho um nepton 240m desde 2016 funcionando!!! Espero que esse dure tanto quanto meu nepton (que ainda funciona)

Primero que nada, tuve que comprar el artículo 2 veces (devolviendo 1) ya que el primero que me llegó no traía unos brackets para montar la bomba de agua a cpu AMD, el segundo si lo traía pero lo menciono ya que al inicio fue algo frustrante eso.La instalación es sencilla y fácil de seguir, viene con su pasta térmica y todo lo necesario, no es muy ruidoso el ventilador y mantiene en un promedio de 45 °C el procesador, estoy usando un Ryzen 7 5800x (sin overclock) y la verdad es que no me quejo de su desempeño, enfría muy bien y tienes bastante espacio para hacer overclock, el rgb me gusta mucho, el espejo RGB tiene un toque único en el buildPa pronto, si compralo, está a buen precio y te da muy buenas temperaturas.

El producto llegó en perfecto estado. En cuanto al rendimiento llevo usándola durante 5 meses, lo tengo con un i5 12600k y lo mantiene a muy buenas temperaturas. El tema del argb es increíble y si usas la controladora que incluye podrás disfrutar de efectos muy interesantes.Recomiendo ampliamente el producto.

Funciona muy bien, baja bien la temperatura y no es ruidoso. Llevo 4 meses de uso y no presenta ningún problema aún.En cuanto a lo estético es sumamente minimalista y no grita "gamer" que era algo que buscaba para mi PC.Le quitó una estrella por tres cosas. La conexión de aRGB de los ventiladores es muy corta lo cual lo hace algo molesto de tratar.La segunda razón es que el cable del radiador es como 3 cm más corto de lo ideal, ya que tapa la cubierta del cpu y no se puede acomodar de otra forma.La tercera es que no puedes controlar en su totalidad cada componente a menos de que instales el controlador que trae y el software. Esto hace que si la parte de atrás esté llena de cables tengas que hacer aún más espacio para este nuevo controlador.Fuera de eso, me encanta, muy bonito y eficaz.

It's come well packed in PRIME and Fast Delivery. The cooler come pre-mounted on some component and easily installed to your system

No se pudo cargar el contenido.

Life saver. Had been running medium graphic settings while gaming and achieving a high temperature of 80°C. After installing this beautiful Mirror RGB cooler, immediately saw huge dip of 20°C. Now, I'm running high/ultra graphic settings at 60°C.

3 Months In Edit: Just wanted to update this with some more positive impressions. It's been a few months and I am still very happy with this AIO cooler. One thing I wanted to revise is some of the temps below. Maybe I was measuring things wrong, or hadn't gotten the fans dialed in exactly. The idle temps are indeed low 30s (sometimes as low as high 20s,) but under load the thing doesn't budge beyond 45c. It's really quite impressive. Now attached is a new screenshot of a couple temp programs running alone a Prime95 torture test.First, a purchasing note: I ordered this Tuesday afternoon and Amazon delivered it by 1PM Wednesday. Go off, Amazon. It's a bummer that folks are peeing in jars to do this but can't argue with the results.My prior cooling solution was a Corsair H100i that was on its last legs. My CPU (a relatively ancient i5 7600k) was idling in the 50s, and occasionally getting to the tj. max of 100c under load. Needed an upgrade.The good:temps are now in the freezer. My CPU is idling at 30c, under load it gets into the 60s. I ran the stress test in CPU-Z for 30 minutes and it never got above 65c.The pump light is really pretty cool looking. If you haven't gotten sick of vaporwave aesthetics, it's rainbow is something right out of 1987 as imagined by 15 year olds in 2019.Quiet operation. Not noticeably louder than the prior setup despite the extra fan.The OK:Installation was easy enough. On an 115x platform the backing plate goes on, the risers get screwed in, the pump goes on the risers, easy peasy. Putting the fans on the radiator, very easy. Screwing the radiator into the case a little bit more tricky. There are a dozen screws and I ended up only being able to use 10 because the radiator and the case weren't quote flush at the front. The radiator seemed square so maybe it's a problem with the case (old NZXT. Nice case.) So far, doesn't seem to be causing any kind of vibration.There is no software. This is a true neutral observation. The Corsair uses a program that allows the pump and radiator fans to be controlled along with setting RGB colors on the pump. Mostly I used it to troubleshoot because the CPU was running so dang hot. Not having any software for a AIO heatsink seems.. fine. I don't really want to control the fans.The pump RGB can be controlled with a little box, which is smartly magnetic so it just hangs on the back of the case. There's a wire running that I don't love but maybe I'll find a more beautiful solution eventually. Apparently there is a way to control the pump RGB using something called "ARGB" which is a feature on newer motherboards. My older board doesn't have it, so it's the box or nothing.Quality of all the hardware is nice. Everything looks well made, screwed in together without grinding, feels like quality kit.The bad:Nothing. Very happy overall.I guess the installation instructions are very barebones. It's like Ikea diagrams. There is a note in the manual that says the pump may make some noise for the first 15 minutes, and to just wait and "chill out" if it happens. I know how these things work so no trouble, but if this is your first AIO cooler install you might need to watch some how-to videos.Aside from a couple minor issues, this thing is great. On a 10 point scale, I'd probably give it 9. On a five, I'm gonna go ahead and say the good outweighs the bad and say 5/5. If you are looking for an AIO and your case can handle the big boy radiator, this thing delivers.

Why does it feel like this particular line of AIOs from Cooler Master is being hidden? It's hard to find out they even exist, from PC PartPicker not listing them anywhere, to CM's own website not having them in an easily discoverable way.This is by far my favorite styling on any of the CoolerMaster AIO pumps; I really hope that they're phasing this design in rather than out. It might actually be my favorite aesthetic on any AIO pump period. minimal branding, a decently implemented infinity mirror, and very well diffused ARGB lighting without any weird pin-outs (for the record, 5v ARGB, 4-slot with 3 pins). I can confirm that it at least plays well with MSI's Mystic Light and ASUS's Aura Sync.The mounting is fine, I might even call it easy (very strong adhesive on the motherboard backplate, helps with getting the mounting standoffs). The thing is, the instructions are suuuuper confusing. Like, I know how to put these on, but I started out installing this by following the instructions and I got confused pretty quick. It's doable, but not the most beginner-friendly.Sidebar: I find that most of CoolerMaster's products suffer from confusing instructions and sometimes poorly thought-out and overengineered assemblies. This stands in contrast to, say, Noctua. Don't get me wrong, I love CoolerMaster's stuff in general. They generally have great features and quality for the price on almost everything they sell. But, IDK, better instructions please?Anyway, nothing much more to say. The stock fans are well built with dampened mounts. The motor noise is fine, but they do have a bit of resonance noise at certain RPMs (true of most fans other than high-end ones). The Pump Runs very quietly at a nice 1400 RPM, but at its max speed of 2500-ish, it has a fairly noticeable drone (again, nothing unusual). I never found it to make any high-pitched noises at any RPM, so that's good. The high-RPM noise was a mid-upper bass hum, and at low RPM the only noise is a light ticking sound that you'd have to one the case with all fans off to hear.Great cooler. Make more of this style please.