No hay artículos en el carro
No hay artículos en el carro
Información del producto:
Material: ABS de alta calidad, anillo de silicona.
Peso del artículo: 112 g.
Dimensiones del artículo: 17 x 7,5 x 6 cm.
Compatibilidad: universal.
Color: fibra de carbono, blanco, negro, gris, plata, rojo, dorado, azul.
¿Tienes problemas como muchas personas?
1. La antena original del coche es demasiado larga, carece de personalidad.
2. Mala señal cuando vas a lugares remotos.
3. Las antenas convencionales tienen mucho ruido de flujo de aire, que es demasiado fuerte durante la conducción.
4. Cuando el clima está seco, el coche es propenso a la electricidad estática.
Tenemos esta antena de aleta de tiburón para resolver tu problema:
1. Logra el propósito de la decoración.
2. Mejora la señal con receptor de señal reforzado.
3. Fuerte capacidad para resistir interferencias.
4. Los electrones electrostáticos se liberan en la punta trasera de la antena de aleta de tiburón para reducir la electricidad estática en la superficie del automóvil.
Carla Watkins
Comentado en los Estados Unidos el 29 de marzo de 2025
Quality is fine but does not work for Kia Sorento.
Rochelle Smith
Comentado en los Estados Unidos el 26 de febrero de 2025
It arrived promptly & in good condition, then we went into deep freeze weather so I could not try to install it until today and missed the return deadline - which was today.Know that it is a very light blue color. It is wide enough but an inch too short to fit the antenna on my 2017 Ford Edge.When I reorder I will also purchase some adhesive, this comes with a few, very thin, double sided foam tape pieces cut to fit the cover.
Laura
Comentado en los Estados Unidos el 21 de febrero de 2025
Absolutely does not fit a 2014 Hyundai Sonata. Flipped just the plastic piece off the top while trying to get snow off. Ordered this, after saying it was confirmed a fit. Would not seat properly. Even removed rubber gasket and it still would not work. Returned it.
RICARDO HERNANDEZ
Comentado en México el 9 de marzo de 2024
El producto se ve de buena calidad tardo mucho en llegar pero cumple con lo publicado le quedo perfecto a mi auto
AndreVela
Comentado en México el 27 de marzo de 2024
Solo sintoniza una estación y pésima calidad, no es ni compatible con mi vehículo
Juan
Comentado en México el 28 de febrero de 2024
Funciona perfecto, recién la recibi la instale, esperemos dure el pegamento que trajo.
FERNANDO
Comentado en México el 18 de diciembre de 2024
Esta calidad de antena es muy buena, tiene una recepción enorme , puedo escuchar estaciones de radio en excelente calidad .bien.
StinkerBell
Comentado en los Estados Unidos el 15 de noviembre de 2024
My teen daughter has a 2016 Hyundai Elantra, think base model maybe the one above that. I didn't realize this cover easily coming off on Hyundais was a thing, until I had to search for the replacement. Firstly, if you are a new Hyundai owner, I'd recommend avoiding automatic car washes. But, if you're here reading this, it's probably too late.Two, if you are looking for this part, be sure you measure and look closely at the inside of your antenna. There's several different variations for them apparently.The type in our vehicle, that square-computer chip thing in the middle is twisted so it looks more like a diamond shape. Most of the parts I've seen have it look like a square shape. Some have another square above that, and some have a space for a gps tracker which is a big green tail type thing sticking out of the bottom. The part number for the one I needed, the diamond type shape, is 96210-3x100. And, it's about impossible to find, unless you buy the whole antenna assembly which is what the part number is for I realized, and I've seen anywhere for 80.-200.+ dollars. And, to do that, you need to remove the headliner, and replace the whole antenna assembly from inside the vehicle. And I really don't want to spend that much money for just the plastic piece on the outside that is very likely to fly off again at some point in time. Sorry for the novel, just trying to help out anyone in the same boat.With a really rainy week coming up, I went ahead and ordered this one. Dimensions seemed to fit and I was hoping I could modify it a bit to make it work. I gut the inside. I cut out the screw parts, which I kind of regretted after the fact. So be sure to check the screw parts on your vehicle. They will break off differently and may work out ok for your situation. I ended up having to cut the ones on the vehicle as well to get the cover to fit on more secure. Both easily cut off with small wire cutters I had. I then used some JB Weld to secure it to the car. The fin cover itself looks fine. The JB Weld was an absolute mess, and you can see how messy it is all over the cover. My daughter was ticked, told her oh well do it yourself next time and do better :) It should scrape off with a razor blade. It's been a couple weeks now, and it's staying on and secured. But it isn't seated completely, when I pushed it down while waiting for the weld to cure, one side would pop up a bit. So my next step is to try some black flex seal tape to hopefully fill in the small gap on the side and further secure it and protect it from the elements. So overall, this worked fine for me. None of the issues I've experienced were due to this part here. I'd recommend it, you can probably make it work, just may have to get creative with it.
Klaka
Comentado en Australia el 5 de septiembre de 2024
Piece of junk plastic with nothing inside to connect an antenna
JAndres Cardeon
Comentado en México el 13 de abril de 2024
Está bien pero le tuve que poner más cinta doble cara porque no aventaba bien en el techo del carro, pero cumple su funcion
Productos recomendados
Mex $509.00
Mex $ 274 .00 Mex $274.00
Mex $238.31
Mex $ 126 .00 Mex $126.00