Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

CURT 56518 - Arnés de cableado de Remolque de 7 Pines para Lado del vehículo, Compatible con Honda Pilot

Envío gratis en pedidos superiores a Mex $600.00

Mex $2,245.15

Mex $ 1,100 .00 Mex $1,100.00

En stock

Acerca de este artículo

  • Fácil de instalar, sin cortar. Sin empalme. Este arnés de cableado de remolque se conecta al cableado del equipo original existente en tu vehículo y lo equipa con un conector de cableado de remolque de 7 pines estándar para conectar y remolcar un remolque
  • Conector resistente: el conjunto de cableado del remolque de 7 vías se puede utilizar para conectar luces traseras del remolque, luces de freno, señales de luz inversa, señales de giro, frenos eléctricos del remolque y un cable de alimentación auxiliar
  • Específico para vehículos: este paquete de arnés de cableado de remolque de vehículo está diseñado para modelos seleccionados del Honda Pilot
  • Construcción duradera: para un uso duradero y una conexión confiable, la carcasa del enchufe de cableado del vehículo de 7 pines está hecha de goma moldeada negra duradera que nunca se oxida ni se corroe. Los cables también están protegidos por una manga de telar ranurado
  • Funda con resorte – para promover un uso duradero y resistencia a la intemperie, este kit de arnés de cableado de remolque de 7 pines viene con una cubierta antipolvo con resorte. Protege el conector de hoja RV de 7 vías cuando no está en uso, protegiéndolo de los elementos exteriores


El cableado personalizado CURT está hecho con algunas de las tecnologías más sofisticadas de la industria y está diseñado para instalarlo con facilidad, lo que te da una conexión eléctrica duradera para tu configuración de remolque. Si tu vehículo no está equipado con cableado para remolcar un remolque, el cableado personalizado CURT es la solución ideal. Un arnés de cableado personalizado (también llamado conector T) es un dispositivo eléctrico simple enchufar y usar que se conecta al sistema eléctrico de tu vehículo y proporciona una conexión de cableado estándar del remolque. Esto se hace utilizando dos o más conectores específicos para vehículos compatibles con OEM para conectar al conjunto de la luz trasera, eliminando la necesidad de cortar, empalmar y soldar durante la instalación. Los arneses de cableado personalizados se hacen específicos para el vehículo, y aunque no están disponibles para todos los vehículos, ofrecen una de las formas más rápidas, fáciles y seguras de cablear un vehículo para remolcar. Este arnés particular proporciona un enchufe de conector de hoja RV de 7 vías y está diseñado para ser un arnés de cableado personalizado durante ciertos años del Honda Pilot (ver información de la aplicación para verificar el ajuste). Viene con todos los componentes de cableado necesarios para establecer una conexión de cableado confiable del remolque, así como una cubierta antipolvo para mantener el conector limpio cuando no esté en uso. Tienes una imagen en mente de tu próximo destino: tal vez sea el barco que aterriza en tu lugar de pesca favorito, tal vez sea un campamento que domina una de las obras maestras de la naturaleza, o tal vez sea el próximo gran lugar de trabajo. Sin embargo, convertir esa imagen en realidad requiere algo más que soñar despierto. Toma una conexión sólida y la cantidad adecuada de potencia.


David W
Comentado en los Estados Unidos el 8 de febrero de 2025
Plenty of long leads on cable. The vehicle connector is indeed very hard to get to. You can get your fingers on it from the tool box and there is a path for the cable. But getting the two connected was hard for me...fat hands I guess! Since I did not want, or actually know how, to remove the plastic trim I just spent time on it and eventually got it. As stated by another reviewer you need a 30 amp micro cartridge (Micro Cartridge Fuse, OEM# 608830 30 Amp Vehicle Slow Blow FMM Mcase) fuse...the one supplied is too big physically. The 2 provided 20 amp fuses are fine. And I may be wrong, but you actually only need the 30 amp if you are using a brake controller....don't need it if only using taillights.
Anne Y.
Comentado en Canadá el 31 de agosto de 2024
2025 Trailsport. First one ordered was missing fuse and did not have the 12v power lead in the connector. As well the connector was not the color that the install instructions specified. After installation nothing worked. Peeled back the protective cable cover and found 12v power lead was inside about 5 inches down. How this even passed QI is beyond me.Requested and exchange with amazon and got the new one promptly. Inspected before installation and everything was good. Installed. Worked like a charm.
MacAttack
Comentado en los Estados Unidos el 26 de junio de 2024
If you have a factory Honda hitch this harness will not work without a custom mounting bracket. There isn't one with the kit you are on your own. The problem is that an OEM harness has a 90° connection behind the bumper. This harness goes straight in and won't clear the hitch frame. Add to that there's no mounting bracket and apparently none available except with Honda's kit. I would not have bought it if I had known. This harness appears to have a USCAR compliant connector and I am going to attempt to use a receptical that uses the same standards. I found one that has a pigtail with a USCAR connection and hopefully it will work with this harness. After that I will make my own mounting bracket.
Noah Thomas
Comentado en los Estados Unidos el 16 de marzo de 2024
At the time of purchase Amazon said this part would not fit my vehicle. If you cross reference the Curt website this is the correct model number for the 24 Pilot. The white plug that’s up under the jack cubby is a pain to get to. You can barely see it looking with your eye close to the bumper. Come to find out the white plug on my Pilot is only held on by a plastic rivet. After removing the plug from my car wall it gave just enough slack to plug the two together. The directions in the box are quite janky. It’s like they took two different instructions and pieced them together to make one. Between what did apply to you through the instructions and common sense it’s not hard to figure it out. Once I got everything ran and cleaned up I went to test the plug and nothing would work. I was getting no power to the plug or the inline fuse. After 15 minutes of double checking everything that’s when I remembered I took a bag of fuses out of the box and left them on the kitchen table. The directions don’t mention anything about the fuses. If you look under the hood in the fuse panel of your Pilot there are 3 fuses missing if you bought your Pilot without a hitch or trailer plug. ( No towing package ). The 30 amp fuse that Curt provides is to big you need the next size smaller. I believe it’s called a low profile 30 amp. I just used the other 30 amp that’s already in the fuse box to test it. I’ll go to O’Reillys tomorrow for the correct fuse. The other two are mini 20 amp fuses and those did come correct with the kit. So other than the instructions and the incorrect 30 amp fuse this was a plug and play kit fairly simple to accomplish.
Customer
Comentado en los Estados Unidos el 30 de abril de 2024
In step 7 in the instructions, it tells you to hook up another harness in the tailight. That harness is not in the kit, nor do you need it for a 2024 Pilot. Don't forget the three fuses to install under hood, that is not in the instructions either. This is a nice kit for the 2024 Pilot, to bad they couldn't be bothered to update the instructions.
Productos recomendados

Mex $145.30

Mex $ 85 .00 Mex $85.00

5.0
Elegir