No hay artículos en el carro
No hay artículos en el carroCable Dolphin
Comentado en los Estados Unidos el 28 de marzo de 2025
I used two of these to convert the puck lights under my cabinet from halogen to LED, and they have worked for a couple of years flawlessly now! Installation was a little difficult, but that was due to where the wiring was located not the transformer itself. Would recommend!
Fred S
Comentado en los Estados Unidos el 13 de enero de 2025
I purchased this item because I was installing LED strip lighting underneath my kitchen cabinets. I was only installing about 6 feet of LED strip lights so I did not need a large driver. This driver was very inexpensive and does a great job of reducing the voltage for the strip lights.
Vichugo
Comentado en Canadá el 12 de noviembre de 2024
I used this with 8W of LED under-the-counter puck lights, replacing halogens. It works well. The unit barely gets warm.
Protective Dad
Comentado en los Estados Unidos el 26 de marzo de 2023
No se pudo cargar el contenido.
steve
Comentado en los Estados Unidos el 4 de enero de 2023
Seems to be working well so far, it feels very warm to the touch though.I have not tested the energy draw on it yet but my guess is that it's not that efficient going by the amount of heat it dissipates.I installed this unit about a week ago to replace a failed 12v LED power supply, the kind with a barrel jack and detachable AC cord, it's powering my above and below LED strip cabinet lighting fine so far.This unit takes up less space and has less cable mess than my old one,I had a short AC cord I cut from a broken appliance I used to connect to the input terminals.I tested the output terminals with my meter and it reads a perfect steady 12v.There is no flicker at all on either the warm white or the RGB LED strips I am driving with it, all channels are flicker free.
Productos recomendados