No hay artículos en el carro
No hay artículos en el carroDescripción del producto
ECCPP
ECCPP, sirve tanto al instalador profesional como a los clientes de hágalo usted mismo. ECCPP adopta una nueva técnica y un técnico hábil y profesional para fabricar productos de alta calidad de acuerdo a los requisitos de los clientes. Así que obtendrá un reemplazo de espejos que es idéntico al OE en todos los sentidos, desde la calidad hasta la instalación con un espejo de visión lateral fiable directa. Con aspecto fiable y directo, la instalación y la función son exactamente iguales a la forma original.
Espejos de remolque Introducción:
Compatibilidad con este vehículo:
2002-2008 Dodge Ram 1500 Pickup Truck
2003-2009 Dodge Ram 2500 Pickup Truck
2003-2009 Dodge Ram 3500 Pickup Truck
Potencia ajustada
El ajuste de potencia te permite cambiar la posición del espejo mediante el interruptor de alimentación en el coche, por lo que no tienes que bajarte del coche o alcanzar la mano para ajustar el espejo manualmente, ahorrando tiempo y seguridad.
Función de calefacción
Cuando se calienta el espejo, el calentador detrás de los espejos calienta rápidamente la superficie del espejo, eliminando lentamente la lluvia o la niebla en la superficie del espejo, reduciendo el riesgo de conducción.
Voltear manualmente
La función abatible es manual. Solo requiere que tire del espejo de su vehículo, extendiendo su línea de visión para que pueda ver fácilmente el lado del remolque para que pueda cambiar de carril, tráfico o estacionamiento de forma segura.
Lente convexa
La lente convexa proporciona un ángulo de visión trasera mejor y más amplio. Refleja la parte trasera, lateral y inferior del coche, lo que permite al conductor ver la posición indirectamente. Actúa como un "segundo ojo" para mejorar la visibilidad, reducir los puntos ciegos, mejorar la seguridad vial y mejorar significativamente el estilo y la apariencia.
jason
Comentado en los Estados Unidos el 8 de abril de 2025
Works great
Jeff
Comentado en Canadá el 8 de junio de 2024
Mirrors are ok, but no where near as good as OEM! First the finish is different on different parts, including a large about 4-5" distortion on the plastic face of the DS mirror. The convex mirrors are not formed on the same angles as OEM and are NOT adjustable as mentioned in the ad.... making them less useful. The heated part does not have any connection to the convex mirror, unlike the OEM mirrors which are heated. Though we have not had cold weather yet to try them, that will sure to be an issue, and I can't say if the heating function works at all. If you value your truck, but something better quality than these.
Customer
Comentado en Canadá el 17 de octubre de 2024
Within two days of installing these mirrors, a very gentle knock from a skinny little pine tree broke the mirror off the assembly and cracked the glass. The tree was no more than an inch in diameter on the edge of a narrow cottage driveway. I was driving super slow, uphill, and couldn’t believe the mirror fell right off and even cracked.This product is cheap and flimsy. Our OEM tow mirrors on other trucks regularly knock against branches and skinny little trees, and remain solid and secure. We expected this product to be an alternative, but unfortunately it is total crap. And that’s on us for ordering a cheap product.I would never recommend this product or brand to anyone.I wrote to the manufacturer through the Amazon website and didn’t receive a response.We would never recommend this product and caution everyone to stay far away from this product.
Wili
Comentado en México el 8 de mayo de 2023
No me gustó que apenas voy abriéndo la caja y ya el espejo está despegado del armason lo volveré a pegar espero que en la carretera y con la vibración no se caiga lo demás.
George W.
Comentado en los Estados Unidos el 28 de septiembre de 2020
So these are a good quality mirror that I doubt you would ever tell is not OEM. They are however not simply going to mount up super easy. First remove the door panel by removing the 2 top screws and the 2 lower screws then the 10mm door handle screw. Then push the door panel up from the bottom, it does not have Christmas tree push pins like older trucks these are L shaped arms so don't try to pry it off push it up. The OEM mirror is 3-10mm nuts and one connector so that's easy to remove. To install these you need to stop looking for the non existing directions first. 😁 What I did was take 2 new studs and run the OEM nut from the bottom untill it stops on the non threaded part. Once that's done hold the new mirror up to the truck and then install them on the two holes closest to the door window. Now use a 4mm socket to tighten the studs allowing the factory nuts to lock everything together like a jam nut. For the one closest to the door hinge you will need to cut off half the threads on the lower portion as that bolt is way too long. Use a 4mm socket to install that one untill it is snug but make sure your hand is on the back side of the mirror because the hole goes all the way threw and you can start pushing against the plastic. Once the stud is in reinstall factory nut and torque gently. Plug in the harness carefully (as others have said it's easy to bend the terminals I did and I was a dealership mechanic for years) check function and confirm it's moving. Before you install the door panel you will need to cut the excess part of the 2 studs by the window off as the door panel won't fit if you do not. Reinstall door panel and close gently to make sure the third stud by the hinge doesn't hit the cab. Mine didn't but better safe than sorry. I have included some pics that should help. Overall they are very nice and only took about 40 min to install. Tools I used were a P2 Phillips, 1/4" drive ratchet with 2" woble extension, 10mm socket 3/8 deep and 1/4 shallow, hacksaw or cut off wheel.
Todd
Comentado en los Estados Unidos el 18 de abril de 2017
This is a high quality product especially for the price. I installed these on my 2006 Ram 1500 quad cab. Only took about 30 minutes per side to install.These were extremely easy to install. Instead of using the mounting studs that came with the mirrors, I removed the studs from the old mirrors and they threaded right in I the new mirrors effortlessly.Finished appearance looks like they came on the truck. The fit was perfect in all areas from alignment of mount stud, to the electrical connector and lastly the external alignment of the mirror casing as it mates with the door.One last point to touch on, there is a little bit of vibration that translates to the mirror but it's not a deal breaker. I have driven a ram with OEM towing mirrors and the same but less pronounced vibration exists.I would certainly buy these again if needed and highly recommend for anyone considering upgrading to towing mirrors.
Productos recomendados
Mex $238.00
Mex $ 140 .00 Mex $140.00
Mex $1,321.89
Mex $ 594 .00 Mex $594.00
Mex $2,366.88
Mex $ 994 .00 Mex $994.00