No hay artículos en el carro
No hay artículos en el carro
* Bajo consumo de energía y bajo calor.
* Tamaño estándar industrial, plomo de 29 mm de largo para un uso amplio y conveniente para la cperación.
* Condición de soldadura (soldadura manual): menos de 3 segundos con 500 °F a 500 °F
* Condición de soldadura (soldadura por reflujo): menos de 5 segundos con 500 °F.
* Condiciones de almacenamiento: preservación de secado y mantener alejado del fuego o de alta temperatura.
* ¿Tienes otros modelos LED? Busca "Diodos EDGELEC"
WorkingTowardsBetter
Comentado en los Estados Unidos el 29 de julio de 2024
The cost and quality of this product made it GREAT! I did not have to pay an arm and a leg or get upset because they were useless. They all worked. These were loved by the kids working on electrical projects.
Kevin C.
Comentado en los Estados Unidos el 16 de diciembre de 2024
Great color and bright light emission.
vanessavhk
Comentado en los Estados Unidos el 30 de junio de 2023
i sued them to make spiderman invitaions for my sons birthday party and they were east so use. i used them with copper tape.
Rosa
Comentado en México el 1 de marzo de 2021
Funcionaron perfectos para remplazos de un árbol con luces integradas
BurnedToast
Comentado en los Estados Unidos el 5 de febrero de 2021
I put one of these diodes on a lab power supply set at 3 volts for six hours. At that voltage, it consumes 14ma of current and is VERY bright. After six hours there are no problems, the current is dead on steady, and it is just warm, not hot.I conclude 3 volts is a good setting for this LED.The calculation for finding the current limiting resistor desired ( a resistor in series with the LED) for this 3 volt LED at 14ma is simple,( using a battery also in series). Here are examples:R =(Battery voltage - LED voltage )/ Led Current in ampsFor a 6 volt battery: R = 6-3/0.14 = 214 ohmsFor a 12 volt battery: R = 12-3/0.14 = 642 ohmsNote that resistors do not come in every value, so choose the next larger one.For a 1% tolerance resistor, use 215 ohms and 649 for the above.For a 5% tolerance resistor, use 220 ohm and 680 ohm.The enclosed 430 volt resistors works well with a 10 volt power supply.Five bucks for a hundred (5c each) seems like a bargain.
Cesar Arcos
Comentado en México el 18 de agosto de 2020
Excelentes, solo que el de 3mm mide en realidad 3.180 mm (de acuerdo a medicion hecha con un vernier)
Customer
Comentado en los Estados Unidos el 6 de enero de 2019
These came today and I stuck one into a little joule thief just to see how it compares to the other warm white LEDs I had, and it is much nicer. I got the Chanzon warm white LEDs last year, and the colour of them looks pale and sickly, but these new ones are really warm and look lovely, they are just what I was hoping for.I also tried one on a 5v switched-mode power supply, with one of the supplied 430 ohm resistors, and that is nice too. I have not built many circuits on a 5v supply, so I dunno if I will end up needing all those resistors, but it's nice to have them, and given the price, they're basically a free addition, as compared to other manufacturers that don't supply any resistors.I will definitely buy more LEDs from this manufacturer if I need more or other colours, &c.
Productos recomendados
Mex $99.00
Mex $ 55 .00 Mex $55.00
Mex $506.79
Mex $ 243 .00 Mex $243.00
Mex $349.99
Mex $ 160 .00 Mex $160.00
Mex $4,163.76
Mex $ 1,748 .00 Mex $1,748.00
Mex $224.53
Mex $ 125 .00 Mex $125.00