No hay artículos en el carro
No hay artículos en el carro
Kit de reparación de roscas E-Z LOK para madera
Kit de reparación de roscas E-Z LOK para madera blanda. Este práctico kit incluye insertos roscados, un taladro y una herramienta de accionamiento de instalación.
Estos insertos de rosca para madera blanda son ideales para aplicaciones donde es posible pelar o erosión de hilos. Perfecto para muebles listos para montar, tiradores de cajones, vitrinas, cajas y en cualquier lugar se utilice un cierre en madera suave. Los insertos roscados de accionamiento hexagonal E-Z proporcionan roscas de máquina resistentes en maderas suaves. Cuentan con amplias roscas externas que proporcionan una potencia de sujeción excepcional. Están diseñados para su uso con materiales como pino, madera contrachapada, tableros de composición y MDF. Insertos de rosca de zinc disponibles en inserciones de rosca hexagonal y diseño de inserciones de rosca hexagonal con roscas internas de 8-32 a 3/8 y M6 a M10.
Customer
Comentado en los Estados Unidos el 27 de enero de 2024
What an ease to replace a nut that had pulled out of the wood. And was able to use the table’s existing hardware.
Michael
Comentado en los Estados Unidos el 18 de enero de 2024
I used this to repair my bathroom door when the hinge screws stripped out
chr
Comentado en los Estados Unidos el 26 de septiembre de 2024
Very useful for projects
RAT
Comentado en los Estados Unidos el 18 de abril de 2021
I am building a slab desktop & I was using this product to set C-Channel into the bottom of the 2 slabs that make up the surface. I am using a relatively soft wood.The product comes with a 23/64" bit. After some testing on similar woods I found that diameter too large and only the top teeth really caught. For my softer wood application 5/16" worked best with the 1/4-20 inserts.The drill driver bit was a great idea, just not great for a softer wood. Too much torque available at speed. I found just using an Allen Wrench much more controllable.For my application, I'd have just been better off only buying the inserts (which I had to do anyway, not enough in the kit) - The inserts are a fantastic product!
D. King
Comentado en los Estados Unidos el 7 de noviembre de 2020
I used these on a studio desk so that there would be no screws showing in the finished piece. They work great! Holding power is much more than you'd expect. One thing to keep in mind is that these have a flange. This flange keeps you from inserting them too far; however, they can also keep the two connected surfaces from meeting absolutely flush. I drilled a slight (1/64th or so) countersink with a Forstner bit. This allowed them to be slightly inset and not interfere with fit. Another option would be to order the same fastener without the flange. While you can use a drill to insert them, I used a drill to get them started and an Allen wrench to set them. This eliminated stripping out the wood due to inserting them too fast with a drill.
Underdog
Comentado en México el 23 de abril de 2020
Inslalar las tuercas inserto con esta herramienta fue muy sencillo y rápido, la broca hace un corte perfecto y la llace failita mucho porque lleva el in serto justo al tope.
Productos recomendados
Mex $1,852.16
Mex $ 814 .00 Mex $814.00
Mex $256.71
Mex $ 151 .00 Mex $151.00
Mex $454.55
Mex $ 250 .00 Mex $250.00
Mex $409.47
Mex $ 184 .00 Mex $184.00
Mex $270.36
Mex $ 145 .00 Mex $145.00